Instruction/ maintenance manual of the product 100 PCI 3Com
Go to page of 12
http://www .3com.com/ http://www .3com.com/productr eg E THER L INK ® 10/100 PCI FOR C OMPLETE PC M ANAGEMENT N ETWORK I NTERFACE C ARDS Q UICK G UIDE 3C905C-TX and 3C905C-TX-M EtherLink 10/100 PCI NICs for Complete PC Management Part No.
3Com Corporation ■ 5400 Bayfront Plaza ■ Santa Clara, Califor nia ■ 95052-8145 Copyright © 1999, 3Com Corporation. All rights reserved. No part of this documentation may be repr oduced in any f.
Introduction 3 Introduction This quick guide explains how to install a 3Com ® EtherLink ® 10/100 PCI for Complete PC Management (3C905C) network interface card (NIC) in a PC running Microsoft Windows 95 or W indows 98.
4 E THER L INK 10/100 PCI FOR C OMPLETE PC M ANAGEMENT NIC S Q UICK G UIDE Installing Multiple NICs If you are installing multiple 3C905C NICs in a PC or server , follow the instructions in “Installing Multiple NICs” in Chapter 3 of the user guide.
Installing the NIC 5 Installing the NIC T o install the NIC in the PC: 1 Make sure that you have run the pr einstallation program, as described in the pr evious section. CAUTION: Before handling the NIC, touch the bare metal case of your PC to discharge static electricity from your body .
6 E THER L INK 10/100 PCI FOR C OMPLETE PC M ANAGEMENT NIC S Q UICK G UIDE Figure 1 Installing the NIC 7 Secure the NIC with the scr ew you removed in step 5. If you want to connect the Remote Wake-Up cable, see “Connecting the Remote Wake-Up Cable” in Chapter 2 of the user guide to continue the installation.
Installing the Driver and Software 7 9 Connect the appropriate network cable to the RJ-45 port on the NIC, following the specifications in the table below .
8 E THER L INK 10/100 PCI FOR C OMPLETE PC M ANAGEMENT NIC S Q UICK G UIDE If the New Hardwar e Found dialog box appears: a Select Driver from disk provided by hardware manufacture r , and then click OK . b Insert EtherDisk diskette 1 in drive A, make sure that A: appears in the entry box, and then click OK .
Installing the Driver and Software 9 4 Insert the Windows 95 CD or diskette, and then click OK . If you do not have the Windows 95 CD or diskette, but the Windows 95 installation files are on your hard drive, click OK. Enter the directory in the Copy Files From entr y box (usually C:WINDOWSOPTIONSCABS) , and then click OK .
10 E THER L INK 10/100 PCI FOR C OMPLETE PC M ANAGEMENT NIC S Q UICK G UIDE T o install the NIC driver and software on a PC running Windows 98: 1 T ur n on the power to the PC. Windows 98 detects the NIC. The Add New Hardware Wizard starts. 2 Insert EtherDisk diskette 1 in drive A, and then click Next .
V erifying Successful Installation 11 10 Remove EtherDisk diskette 2 from drive A, and then click Ye s to restart the PC. Y ou must restart the PC to complete the installation. The installation is complete. Go to the next section, “V erifying Successful Installation,” to confirm that the NIC is properly installed.
Book Page 12 Friday, March 19, 1999 11:21 AM.
An important point after buying a device 3Com 100 PCI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3Com 100 PCI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3Com 100 PCI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3Com 100 PCI you will learn all the available features of the product, as well as information on its operation. The information that you get 3Com 100 PCI will certainly help you make a decision on the purchase.
If you already are a holder of 3Com 100 PCI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3Com 100 PCI.
However, one of the most important roles played by the user manual is to help in solving problems with 3Com 100 PCI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3Com 100 PCI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
