Instruction/ maintenance manual of the product MB95F430 Fujitsu
Go to page of 18
FUJITSU MICROEL ECTRONICS (SH ANGHAI) C O., L TD. Unit 1501, Jin M ao T ower , 88 Century Ave ., Pudong New Area, Shan ghai, P .R. China T el: 61007800 Fax : 61007802 MCU- AN - 50008 7-E-12 F² MC-8FX FAMI LY 8-BIT MICROCON TROLLER MB95F430 SERIE S Induction Heater Hardware User Manual Revision History Version Date Comment Charge 1.
2 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 Contents Revision History ................................................................................................................................... 1 1. Introduction.
3 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 1. Introduction Th is document has in troduced how to use the electromagnetic oven hardware. The hardware includes two PCB boards (main board and front board), a fan and a pad.
4 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 2. System Features Power Control Fan Control Fan Delay Of f Buzz Control Led Display Keyboard.
5 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 3. System Introdu ce 3.1. Hardware Block Diagram The electromagnetic eddy current heating is our system theory . We use the PWM to control the IGBT to generate the heating eddy current.
6 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 3.3. MCU Pin A ssignment No. Name Define Note Remark 1 PG2/PPG0/X1A/OUT1 sub oscillator LED COM1 2 PG1/TRG0/ADTG/X0A/.
7 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 3.4. IGBT Features.
8 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 4. System Hardw are 4.1. System Connect Diagram The whole system includes pad, fan, main board and front board.
9 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 4.2. Front Board Figure-3 is the front board image. It is made up of eight led, a 4-bit digital led and eight buttons. Figure-3 Front Boar d 1. Connector , connect to main board.
10 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 4.3. Main Board Figure-4 is the main board image. It is made up of power module, mcu control module and IGBT driv er module. Figure-4 Main Board 1. 220V AC, to supply power .
11 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 5. Module Descrip tion 5.1. Power Module The 220V is connected by “ ICN1 ” and “ ICN2 ” . The 220V is rectified by “ U4 ” , and supplied to the pad. The “ U1 1 ” is a 15V power module.
12 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 5.3. Pad Driver Module W hen t he IGBT (U9) is opened, the current flow over the “ P AD ” . The “ P AD ” is a coil, so it will save the power . The current direction is from le ft to right.
13 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 6. System Operate 6.1. Key & Led Definition The system key buttons and leds are defined as below . Key Define Clear---------------Clear the timer . T imer --------------- S et the timer .
14 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 6.2. Operate Descript T urn On/Of f W hen we have connect the p ower , the “ Power ” led will light. We can push the “ Power ” button to turn on the device, and the “ Power ” led will start wink.
15 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 7. Debug and Program ming 7.1. Debug Environment and T ools Name Description Manufacturer Notes W indow s XP Pro PC OS Microsoft SP2 Softune V3 Software Developing IDE Fujitsu For FFMC- 8L MB95F4 34 K Emulator MCU Emulator Fujitsu --- 7.
16 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 8. Appendix 8.1. Front Board SCH and BOM-List Front Board SCH Front Board BOM-List.
17 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 8.2. Main Board SCH and BOM-List Ma in Board SCH Main Board BOM-List Main Board Part List Index Reference Va.
18 / 18 Induction Heater C Library User Manual V ersion 1. 2 MCU- AN - 50008 7-E-12 23 ICN1 ICN2 ICN 3 ICN4 PCN4 PCN4 4 24 J1 CON10_1 CON10_1 1 25 L1 4.7uH R_6_2_10 1 26 L2 400uH L- 400 - 90 1 27 Q1 Q4 Q6 8050 SOT- 23 - 8050 3 28 Q2 D667 TO - 92 -D667 1 29 Q5 Q7 8050 TO - 92 - 8050 2 30 R1 3.
An important point after buying a device Fujitsu MB95F430 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu MB95F430 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu MB95F430 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu MB95F430 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu MB95F430 will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu MB95F430, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu MB95F430.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu MB95F430. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu MB95F430 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
