Instruction/ maintenance manual of the product DVD-A1XV FujiFilm
Go to page of 92
DVD AUDIO-VIDEO/SUPER AUDIO CD PLA YER DVD-A1XV OPERA TING INSTRUCTIONS HDM I/DVI OPEN/ SUPER AUDIO CLOSE CD SETUP PROGRAM /DIRECT CLEAR CALL SEARCH M ODE PAGE PICTURE ADJUST PURE DI RECT DISPLAY TOP M ENU RETURN M ENU SKIP SLOW /SEARCH PLAY STILL/PAUSE STOP BACK LIGHT POW ER OFF POW ER ON AUDIO SUBTITLE ANGLE MARKER RANDOM DIMMER ZOOM PICT ADJ.
2 2 IMPORT ANT TO SAFETY W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used.
3 3 • DECLARA TION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC Directive.
4 4 NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERV A TIONS RELA TIVES A L ’UTILISA TION / NOTE SULL ’USO NOT AS SOBRE EL USO / AL VORENS TE GEBRUIKEN / OBSER VERA •A void high temperatures. Allow for sufficient heat dispersion when installed on a rack.
5 5 About the operating instructions on the CD-ROM [ ENGLISH ] 1. Check the computer environment. • Adobe Acrobat Reader 5.0 or later is required to view the text. • If Adobe Acrobat Reader is not installed on the computer , install it from the included CD-ROM.
6 6 Acerca de las instrucciones de funcionamiento del CD-ROM [ ESP AÑOL ] 1. Compruebe el entorno del ordenador . • Se necesita la versión del Adobe Acrobat Reader 5.0 o una superior para ver el texto. • Si la versión del Adobe Acrobat Reader no está instalada en el ordenador , instálela desde el CD-ROM suministrado.
7 7 — T ABLE OF CONTENTS — z Features ...................................................................................8, 9 x Discs ..........................................................................................10 c Cautions on Handling Discs .
8 1 FEA TURES 1. Newly developed high performance 10 bit I/P converter performing all processing with a precision of 10 bits A high precision film/video source detection function not only makes the DV.
9 10. Super Audio CD multi-channel playback compatibility In addition to playing DVD audio and video discs, the DVD- A1XV can play multi-channel Super Audio CDs with a playback frequency range covering 100 kHz and a dynamic range of 120 dB or greater within the audible frequency range, and a maximum of 5.
10 2 DISCS • The types of discs listed on the table below can be used on the DVD-A1XV . The marks are indicated on the disc labels or jackets. Usable discs Mark (logo) Recorded signals Disc size DVD.
11 3 CAUTIONS ON HANDLING DISCS Discs Only the discs including the marks shown on page 10 can be played on the DVD-A1XV . Note, however , that discs with special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played on the DVD-A1XV . Do not attempt to play such discs, as they may damage the player .
12 VIDEO IN S-VIDEO IN AUDIO IN L R 4 CONNECTIONS • Read the manuals of all the components when making connections. • Keep the power supply cord unplugged until all connections have been completed. • If the power is on when connections are made, noise may be generated and damage the speakers.
13 (2) Connecting to a TV or Monitor Equipped with Component Video Input Connectors COMPONENT VIDEO IN P R /C R P B /C B Y AUDIO IN LR To power outlet Component video output connectors (P R /C R , P B.
14 2 Connecting an optical fiber cable (commercially available) to the digital audio input connector (OPTICAL) Line up in proper direction Remove the dust cap, line up the cable in the proper directly , then insert it securely as far as it goes. NOTE: • Store the dust cap in a safe place, and be careful not to lose it.
15 2 Sound output from the DVD-A1XV’ s digital audio output connectors [ In the case of bitstream output ] *1 Only 48 kHz/16 bit sources are output. *2 Only 44.1 kHz/16 bit sources are output. *3 44.1 kHz/16-bit PCM signals are output during CD layer playback.
16 CH SEL ENTER (5) Connecting a basic 5.1-channel surround system Analog 5.1-channel audio signals can be output from the DVD-A1XV . The multi-channel audio signals recorded in packed PCM and the multi-channel Super audio CDs can be played when an A V amplifier equipped with analog 5.
17 ✽ Set the “AUDIO SETUP” default setting as shown below . (See pages 46 ~ 51.) • “DIGIT AL OUTPUT” → “PCM” “LPCM (44.1kHz/48kHz)” → “ON” Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers.
18 DVD-A1XV AV amplifier with DENON LINK input terminals To power outlet High quality digital sound with reduced digital signal transfer loss can be enjoyed by connecting a separately sold DENON LINK compatible AV amplifier . (8) DENON LINK connections 2 DENON LINK S.
19 The simple connection of one IEEE 1394 cable permits high quality digital transfer of the following between devices having IEEE 1394 connectors: the audio of DVD video, DVD audio that up until now could only be connected by 5-conductor audio cable in an analog connection, or Super Audio CD and other multi-channel audio.
20 NOTES: • Please use the included IEEE 1394 cable. When using a cable other than the included IEEE 1394 cable, please use a 4-pin IEEE 1394 cable with a length of 3.
21 Device to be connected MUL TI (LPCM) V ideo signals and Dolby Digital/DTS bitstream signals converted into multi-channel PCM signals are output via the HDMI connector . Make the speaker settings at “HDMI AUDIO SETUP” at SETUP . V ideo signals and 2-channel PCM audio signals are output via the HDMI connector .
22 DVI-D connector → HDMI compatible monitor ™ Audio Switches automatically to RGB. Output via DVI-D connector in RGB format. (11) DVI-D connections Connection with equipment that has a DVI (Digital Visual Interface)-D connector permits the transfer of digital images.
23 5 PA RT NAMES AND FUNCTIONS (1) Front Panel q Power ON/ST ANDBY button •P ress once to set to the standby mode. The indicator lights up in red. •P ress again to turn the power on. The indicator lights up in green. w Power indicator • This indicator lights when the power is on and when the power is in the standby mode.
24 PLAY STOP OPEN /CLOSE DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV STILL / PAUSE PURE DIRECT SELECT VIDEO MODE PUSH ENTER FORMAT SELECT HDMI / DVI SUPER AUDIO CD SET UP ON / STANDBY !1 !2 !4 !5.
25 (2) Rear Panel @3 21-pin SCART terminal (A V1) • Connect using a 21-pin SCART cable (available in stores). @4 Audio output connectors (2ch AUDIO OUT) • Connect using the included audio cord.
26 (3) Display IEEE1394 DVI F V PROGRESSIVE 1 A-B AUDIO VCD SUPER DVD GROUP TITLE TRACK CHAP ANGLE D.MIX PROG RAND TOTAL SING REM HDCD WMA MP3 HDMI MPEG JPEG L.PCMP.PCM DIGITAL LFE LFE R SR SR C S L SL SL q er t y u i !0 !7 !6 !5 !4 !3 !1 !2 o w q Lights to indicate the currently playing disc.
27 6 REMOTE CONTROL UNIT 2 The DVD-A1XV can be controlled from a distance using the included remote control unit (RC-993). (1) Inserting Batteries q Remove the remote control unit’ s rear cover . w Place three R6P/AA batteries in the battery compartment in the direction indicated by the marks.
28 (3) Names and Functions of Remote Control Unit Buttons 2 Button not explained here function in the same way as the corresponding buttons on the main unit.
29 !8 OPEN/CLOSE button !9 NTSC/P AL button • Use this to switch the set’ s video output format (NTSC/P AL). @0 SUPER AUDIO CD SETUP button @1 PROGRAM/DIRECT button @2 CLEAR button •P ress this to clear numbers that you have input. @3 CALL button •P ress this to check the program contents.
30 7 LOADING DISCS 2 Set discs in the disc tray with the labeled (printed) side facing up. Inner disc guide (8 cm disc) Disc tray NOTE: • Do not move the DVD-A1XV while a disc is playing. Doing so may scratch the disc. (1) Opening and Closing the Disc T ray q Tu rn on the power .
31 8 CHANGING THE DEF AUL T SETTINGS SELECT FORMAT NTSC/P AL AUDIO SUBTITLE ANGLE H D M I/D V I O PE N / S U P E R A U D IO C LO S E C D S E T U P P R O G R A M /D IR E C T C L EA R C A L L SE A R C H M O D E D IS P L A Y TO P M E N U R ET U R N M EN U B A C K LIG H T P O W ER O FF P O W E R O N PICT ADJ.
32 Use the 0 and 1 cursor buttons to select the desired setting item, then press the ENTER button. • Select “LANGUAGE SETUP”. (See pages 35 ~ 37.) • Select “DIGIT AL INTERF ACE SETUP”. (See pages 38 ~ 42.) • Select “VIDEO SETUP”. (See pages 43 ~ 45.
33 LANGUAGE SETUP DIALOG SUBTITLE DISC MENUS OSD LANGUAGE ENGLISH FRENCH SP ANISH GERMAN IT ALIAN OTHERS OFF ENGLISH FRENCH SP ANISH GERMAN IT ALIAN OTHERS ENGLISH FRENCH SP ANISH GERMAN IT ALIAN OTHE.
34 RA TINGS RA TING LEVEL 0 (LOCK ALL) 1 2 3 4 5 6 7 8 (NO LIMIT) CHANGE OTHER SETUP PLA YER MODE CAPTIONS W ALL P APER SCREEN SA VER DISPLA Y AUTO POWER MODE SLIDE SHOW AUDIO VIDEO OFF ON BLUE GRA Y BLACK PICTURE OFF ON OFF ON OFF ON 5SEC (5~15SEC) AUDIO SETUP AUDIO CHANNEL DIGIT AL OUTPUT LPCM (44.
35 When “LANGUAGE SETUP” is selected 1 2 3 See pages 31, 32. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. DIALOG Use this to set the language of the sound output from the speakers. SUBTITLE Use this to set the language of the subtitles displayed on the TV .
36 3 w When “SUBTITLE” is selected: OFF Select this if you do not want to display the subtitles. (For some discs it is not possible to turn off the subtitle display .) ENGLISH (Factory default) Select this when you want to play the DVD with the subtitles in English.
37 Language code list Code 6565 6566 6570 6577 6582 6583 6588 6590 6665 6669 6671 6672 6678 6679 6682 6765 6779 6783 6789 6865 6869 6890 6976 6978 6979 6983 6984 6985 7065 7073 7074 Code 7079 7082 708.
38 When “DIGIT AL INTERFACE SETUP” is selected 1 2 See pages 31, 32. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. HDMI/DVI PICTURE ADJUST Switches the digital RGB video range (data range) via the HDMI and the DVI-D connectors.
39 3 w When “HDMI AUDIO SETUP” is selected: 2CH (Factory default) The audio signals are output via the HDMI connector with a down- mixed to 2 channel. MUL TI (NORMAL) The multi-channel audio signals are output via the HDMI connector with a bitstream.
40 3 B When “CHANNEL LEVEL” is selected, use the • and ª cursor buttons to select the speaker to be adjusted, then use the 0 and 1 cursor buttons to set the level. • TEST TONE Use the 0 and 1 cursor buttons to select auto or manual. Adjust so that the volume of the test tones output from the different speakers sounds the same.
41 3 •W hen “DEF AUL T” is selected: When “DEF AUL T” is selected and the ENTER button is pressed, all the items are restored to their factory default settings. When digital connections are made with an A V amplifier , make the speaker settings on the A V amplifier .
42 3 I EEE 1 3 9 4 SETU P I EEE 1 3 9 4 SET U P AUTO P L AY AUD I O F ORMAT OFF ON DE CISIO N:E N T E R B U T T O N SE L E CT : I EEE 1 3 9 4 SETU P I EEE 1 3 9 4 SET U P AUTO P L AY AUD I O F ORMAT F.
43 3 Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. q When “TV ASPECT” is selected: 4:3 PS Select this to play wide DVDs in the pan & scan mode (with the sides of the picture cut off). Discs for which pan & scan is not specified are played in the letter box mode.
44 3 w When “TV TYPE” is selected: NTSC Select this when your TV’ s video format is NTSC. If NTSC is selected, output format is fixed to NTSC. PA L Select this when your TV’ s video format is P AL. If P AL is selected, output format is fixed to P AL.
45 3 t When “SQUEEZE MODE” is selected: OFF (Factory default) Select this to display as full size of a 16:9 TV , regardless of the image’ s size. ON Select this to display the image with a ratio of 4:3 at the center of a 16:9 TV display , regardless of the image’ s size.
46 When “AUDIO SETUP” is selected 1 2 See pages 31, 32. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. AUDIO CHANNEL Use this to adjust for the connected speaker systems. DIGIT AL OUTPUT Use this to select the digital output’ s signal format.
47 3 Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. q When “AUDIO CHANNEL” is selected: MUL TI CHANNEL (Factory default) Select this for systems in which three or more speakers are connected.
48 B When “SPEAKER CONFIGURA TION” is selected, use the • and ª cursor buttons to select the speaker to be set then press the ENTER button. • The type of speaker used for the front speakers, center speaker , subwoofer and surround speakers can be set.
49 3 B When “DELA Y TIME” is selected: With 5.1-channel surround sound, ideally the distance between the listening position and all the speakers aside from the subwoofer should be the same. The delay time setting can be used to make the sound from the different speakers reach the listening position at the same time.
50 3 w When “DIGIT AL OUTPUT” is selected: NORMAL (Factory default) When playing DVDs recorded in Dolby Digital or DTS, bitstream signals are output from the digital audio output terminals. When playing DVDs recorded in linear PCM or packed PCM, linear PCM signals are output.
51 3 t When “BASS ENHANCER” is selected: (For 2 channel source.) OFF (Factory default) No sound is produced from the subwoofer . ON Sound is produced from the subwoofer . In the case, set the subwoofer to “YES” at the speaker settings. This works only with analog audio output.
52 When “RA TINGS” is selected 1 2 3 See pages 31, 32. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button.
53 3 w When “P ASSWORD” is selected: Use the 1 cursor button to select the “CHANGE”, then press the ENTER button. Use the number buttons to input a old (current) 4- digit password. The default password is “0000”. Use the number buttons to input a new 4-digit password.
54 When “OTHER SETUP” is selected 1 2 3 See pages 31, 32. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. PLA YER MODE The DVD video play mode can be set to play the DVD video contents included on a DVD audio disc.
55 3 OTHE R SETU P PLA YER M ODE CAPT I O N S WAL L PAPER SCREEN SA VER DI S P LA Y AUT O PO W ER M ODE SL I DE SHO W EX I T S ETU P DE CISIO N:E N T E R B U T T O N SE L E CT : BLUE GRAY BLACK PICTUR.
56 OTHE R SETU P PLA YER M ODE CAPT I O N S WAL L PAPER SCREEN SA VER DE CISIO N:E N T E R B U T T O N SE L E CT : DI S P LA Y AUT O PO W ER M ODE SL I DE SHO W EX I T S ETU P 5SEC ✽ To exit the setup mode Use the ª cursor button to select “EXIT SETUP”, then press the ENTER button.
57 PLAY STOP OPEN/ CLOSE DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV STILL / PAUSE PURE DIRECT SELECT VIDEO MODE PUSH ENTER FORMAT SELECT HDMI / DVI SUPER AUDIO CD SET UP ON / STANDBY 4 MARKER RANDOM DIMMER ZOOM PICT ADJ.
58 4 Main unit PURE DIRECT SELECT Press the PURE DIRECT SELECT button. • The modes described below will appear on the display . NORMAL : All signals are output normally .
59 MARKER RANDOM DIMMER ZOOM PICT ADJ. SET UP MEMORY A-B REPEAT SELECT AUDIO SUBTITLE ANGLE P A G E P IC T U R E A D JU S T P U R E D IR E C T D IS P LA Y TO P M E N U R E T U R N M EN U S K IP S L O .
60 4 MEMOR Y 1 123 00 OFF E E When Image Quality Adjustment 2 is selected and adjusted: WHITE LEVEL (–5 to +5) (Factory default: 0) • This adjusts the white level. BLACK LEVEL (–5 to +5) (Factory default: 0) • This adjusts the black level. CHROMA LEVEL (–6 to +6) (Factory default: 0) • This adjusts the density of the color .
61 6 Select the adjust point with cursor buttons ( 0 , 1 ), set the adjustment brightness level with cursor buttons ( • , ª ), and press the ENTER button. (If the PICTURE ADJUST button is pressed before pressing the enter button, an adjustment level is not stored) • The brightness level can be adjusted in range of 16 to 235.
62 STD(ST ANDARD) M1(MEMORY1) M2(MEMORY2) M3(MEMORY3) M4(MEMORY4) M5(MEMORY5) SET 1(ADJUSTMENT 1) 2(ADJUSTMENT 2) 3(ADJUSTMENT 3) GAMMA CONTRAST BRIGHTNESS SHARPNESS(MID) SHARPNESS(HI) HUE WHITE LEVEL BLACK LEVEL CHROMA LEVEL ENHANCER DNR CCS G0~G9 SETUP LEVEL H.
63 PLAY STOP OPEN/ CLOSE DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV STILL / PAUSE PURE DIRECT SELECT VIDEO MODE PUSH ENTER FORMAT SELECT HDMI / DVI SU PER AUDIO CD SET UP ON / STANDBY 3, 4 1 2 12 USING THE VIDEO SETUP 2 The video output setting of the HDMI and the DVI-D connectors can be changed.
64 3 Tu rning the VIDEO MODE knob. • The modes described below will appear on the display . Select the item you wish to set and press the VIDEO MODE knob to define it.
65 When “TV SYSTEM” is selected: • The modes described below will appear on the display . Select the item you wish to set and press the VIDEO MODE knob to define it. PROGRESSIVE (Factory default) The audio signals are synchronized with the progressive output.
66 4 Press the OPEN/CLOSE button. Main unit Remote control unit OPEN / CLOSE OPEN / CLOSE OPEN/ CLOSE 1 2 3 Press the OPEN/CLOSE button to open the disc tray .
67 Apple 6 7 Use the cursor buttons ( • , ª , 0 and 1 ) to select the desired item. • For some discs there is a second menu screen. If so, press the 9 button to display the next menu screen. (See the disc’ s jacket.) ✽ The cursor buttons ( • , ª , 0 and 1 ) do not work for video CDs.
68 PLAY STOP OPEN/ CLOSE DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV STILL / PAUSE PURE DIRECT SELECT VIDEO MODE PUSH ENTER FORMAT SELECT HDMI / DVI SU PER AUDIO CD SET UP ON / STANDBY STILL/P AU.
69 (5) Skipping to the Beginning of Chapters or T racks Cueing using the SKIP buttons During playback, press one of the SKIP buttons on the main unit or the remote control unit. 8 : Reverse direction (PREVIOUS) 9 : Forward direction (NEXT) •A number of chapters or tracks equal to the number of times the button is pressed is skipped.
70 (8) Selecting the still image (only for DVD-audios) During playback, press the P AGE + or P AGE – button on the remote control unit. • For DVD audio discs with still images, the desired image can be selected. • On some discs the image cannot be selected due to the intentions of the discs’ producers.
71 14 PLA YING REPEA TEDL Y 2 Use this function to play your favourite audio or video sections repeatedly . Playing Repeatedly (Repeat Playback) 1 In the play mode, press the REPEA T button. • The display on the TV screen switches each time the button is pressed, and the corresponding repeat play mode or normal playback mode is set.
72 Playing a Certain Section Repeatedly (A-B Repeat Playback) 1 2 During playback, press the A-B button. • This sets start point A. Press the A-B button again.
73 15 PLA YING TRACKS IN THE DESIRED ORDER 2 Use this function with DVD-AUDIO discs, video CDs, Super audio CDs and music CDs to play the tracks in the desired order . 2 This function does not affect with DVD-VIDEO discs. 1 2 3 In the stop mode, press the PROGRAM/DIRECT button once.
74 16 PLA YING TRACKS IN THE RANDOM ORDER 2 Use this function with video CDs, Super audio CDs and music CDs to play the tracks in random order . With DVD-AUDIO discs, random playback is performed within the selected group. 2 This function does not affect with DVD-VIDEO discs.
75 GROUP 01/02 GROUP ELAPSED TRACK 01 /10 0 : 00 : 01 AUDIO 1/1 : PPCM 5.1 ch/ 96 kHz/24 BIT GROUP REMAIN 0 : 57 : 59 TRACK ELAPSED 0 : 00 : 01 TRACK REMAIN 0 : 05 : 59 17 USING THE ON-SCREEN DISPLA Y 2 Use this function to display and change information on the disc (titles, chapters, time, etc.
76 NOTES: •W ith some discs it is not possible to change the audio language during playback. In such cases, select from the DVD menu. (See page 79.) • If the desired language is not set after pressing the • and ª cursor buttons several times, the disc does not include that language.
77 NOTES: • If the desired language is not set after pressing the • and ª cursor buttons several times, the disc does not include that language. • The subtitle language set with the default settings (See pages 35, 36.) is set when the power is turned on and when the disc i s replaced.
78 Switching the Angle (Multiple Angle Function) 2 With DVDs containing multiple angle signals, the angle can be switched during playback. 1 2 During playback, press the ANGLE button. • The current angle number is displayed. Use the • and ª cursor buttons to select the desired angle.
79 19 USING THE MENUS 2 For DVDs containing multiple titles, the desired title can be selected and played from the top menu. 1 2 During playback, press the TOP MENU button. • The top menu appears. Use the cursor or number buttons to select the desired title.
80 2 Some DVDs include special menus called DVD menus. For example, DVDs with complex contents may contain guide menus, and DVDs with multiple languages may contain audio and subtitle language menus. These menus are called “DVD menus”. Here we describe the general procedure for using DVD menus.
81 20 MARKING SCENES YOU W ANT TO SEE AGAIN 2 Set marks at scenes you want to see again so that you can start playback from the marked position whenever you want. 1 2 During playback, press the MARKER button. • The marker screen appears. • Use the 0 and 1 cursor buttons to select the “ ” marks.
82 NOTES: • Zooming is not possible with some discs. • The zoom function may not work properly at some scenes. • Zooming is not possible at the top menu or the menu screen. •W hen the picture is enlarged, the picture quality may be decreased and the picture may be blurred.
83 22 PLA YING MP3 PLAY STOP OPEN/ CLOSE DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV STILL / PAUSE PURE DIRECT SELECT VIDEO MODE PUSH ENTER FORMAT SELECT HDMI / DVI SU PER AUDIO CD SET UP ON / ST.
84 FO LD ER1 FO LD ER2 FO LD ER3 FO LD ER4 FO LD ER5 DIS C IN FO R M A TIO N 0 •• 1 MP3 _ 0 1 2 MP3 _ 0 2 3 MP3 _ 0 3 4 MP3 _ 0 4 5 MP3 _ 0 5 ROO T PLAY M O D E FO L D ER SI NG LE ELA PSE D: --:--.
85 23 PLA YING WMA 2 Listening to WMA (Windows Media Audio) CD-R/CD-RW • This unit can play CD-R/RW music files that have been recorded in the WMA (Windows Media Audio)* audio compression format. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
86 24 PLA YING STILL PICTURE FILES (JPEG FORMA T) 2 JPEG files stored on Kodak picture CDs, Fujicolor CDs, CD-Rs and CD-RWs can be played as a slide show and enjoyed on the DVD-A1 XV . Playing still picture 1 q Load the Kodak picture CD into the DVD-A1XV .
87 DIS C IN FO RMA T I ON 0 •• 1 A 2 B 3 C 4 D 5 E JPEG 1 JPEG 2 JPEG 3 JPEG 4 JPEG 5 ROO T PLAY M O D E FO L D ER SI NG LE ELA PSE D: --:-- SE L E CT : DE CISIO N : E N T E R B U T T O N 2 Use the • and ª cursor buttons to select the folder containing the file(s) you want to play , then press the ENTER button.
88 Special play modes for WMA and MP3 and JPEG files Use the 0 and 1 cursor buttons to select the play mode, the • and ª cursor buttons to select the special play mode.
89 Check again before assuming the player is malfunctioning 25 TROUBLESHOOTING 2 Are all the connections correct ? 2 Are you following the instructions in the manual ? 2 Are the amplifier and speakers operating properly ? If the DVD-A1XV does not seem to be functioning properly , check the table below .
90 Symptom Page Check An image is not projected with an HDMI/DVI connection. 25 20~22 63 20~22 57, 58 • Check the HDMI/DVI connection.(Check the status of the HDMI/DVI indicators.) • Check whether the connected monitor equipment or other equipment supports HDCP .
91 26 MAIN SPECIFICA TIONS Signal system: NTSC/P AL Applicable discs: (1) DVD-Audio/DVD-Video discs 1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided discs, 2-layer 12 cm double-sided discs.
00D 511 4289 013 TOKYO, JAP AN www .denon.com.
An important point after buying a device FujiFilm DVD-A1XV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought FujiFilm DVD-A1XV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data FujiFilm DVD-A1XV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, FujiFilm DVD-A1XV you will learn all the available features of the product, as well as information on its operation. The information that you get FujiFilm DVD-A1XV will certainly help you make a decision on the purchase.
If you already are a holder of FujiFilm DVD-A1XV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime FujiFilm DVD-A1XV.
However, one of the most important roles played by the user manual is to help in solving problems with FujiFilm DVD-A1XV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device FujiFilm DVD-A1XV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center