Instruction/ maintenance manual of the product Joinery Router Freud
Go to page of 18
156 ROUTER BITS & SETS Joiner y Bits Dovetail Bits • Compatible with popular dovetail jigs, these bits produce smooth, intricate dovetail joints. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
3/8 " 8 ° # 22-120 Dovetail Bits 157 ROUTER BITS & SETS Joiner y Bits Red Item Numbers Indicate 1/2 " Shank All Profile Drawings 1:1 Scale (Continued) 3/8 " 14° # 22-103 3/8 ".
158 ROUTER BITS & SETS Joiner y Bits Butterfly Spline Bit • This bit produces a str ong, attractive method of joining wood. Use a 14-degree dovetail bit to produce the mating gr ooves. • Cuts all composition materials, plywoods, hardwoods, and softwoods.
Rabbeting Bits with Bearing Set • With interchangeable bearings to cut rabbets of dif ferent depths, these sets pr oduce super smooth cuts on both surfaces of the rabbet. • 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits. • Wr ench included.
160 ROUTER BITS & SETS Joiner y Bits Stacked Slotting Set • By changing the bearings this set will cut three dif ferent depths (1/4", 3/8", 1/2"). • Set includes Freud's slotting cutter arbor 60-202, 3 bearings and 4 specially designed slotting cutters.
Biscuit Joining Set • Easy and economical way to join wood. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on hand-held and table-mounted portable routers.
162 ROUTER BITS & SETS Joiner y Bits Three Wing Slotting Cutters • Should be used with Freud's slotting cutter arbors 60-100 for 1/4" shanks and 60-102 for 1/2" shanks. • Compatible with 62-108 bearing. • Cutter 56-109 can be used for biscuit joining.
Slotting Cutter Arbors • For premium performance use with Fr eud slotting cutters, although compatible with any slotting cutter with a 5/16" bore.
164 ROUTER BITS & SETS Joiner y Bits Slotting Cutter Sets • Includes three wing slotting cutter , arbor and ball bearing. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on hand-held and table-mounted portable routers.
Canoe Joint Bits • Bit 99-017 cuts the flute and 99-018 cuts the mating bead. • Cuts all composition materials, plywoods, hardwoods, and softwoods.
166 ROUTER BITS & SETS Joiner y Bits Drawer Lock Bits • Drawer fronts ar e formed horizontally , flat on the table surface. • Drawer sides are formed vertically against the fence of the table. • Cuts all composition materials, plywoods, hardwoods, and softwoods.
167 ROUTER BITS & SETS Joiner y Bits Red Item Numbers Indicate 1/2 " Shank All Profile Drawings 1:1 Scale Lock Miter Bits • Run one board vertically and the piece to be joined horizontally . • 99-035 cuts thinner panels for projects such as humidors and jewelry boxes.
170 ROUTER BITS & SETS Joiner y Bits Raised Panel “V” Joint Bit • Mating surfaces are at an angle, not vertical, so the dark lines like those cr eated by standard finger joint bits ar enot visible. • Bit does not have to be centered in the wood.
Adjustable T ongue & Groove Bit Set • Exclusive Freud design featur es a tongue cutter with opposing shear angles to ensure a flawless finish. • Adjustable at .002 inch increments for stock thickness of 1/2" to 1-1/4" and gr oove widths of 7/32" to 3/8".
170 ROUTER BITS & SETS Joiner y Bits Raised Panel “V” Joint Bit • Mating surfaces are at an angle, not vertical, so the dark lines like those cr eated by standard finger joint bits ar enot visible. • Bit does not have to be centered in the wood.
Finger Joint Bit • Produces a joint that is str onger than the wood itself. • Tips on each side of the bit are of fset, cutting twice as many fingers as you see tips on each side of the bit. • Cuts all composition materials, plywoods, hardwoods, and softwoods.
172 ROUTER BITS & SETS Joiner y Bits V ariable Height Finger Joint Bit • Ideal for joining wood edge-to-edge or end-to-end, because the joint produced is stronger than the wood itself. • Replacement cutters available and uses arbor #60-152. • Allows you complete freedom when pr oducing finger joints.
“V” Panel Bit Set • Set includes spacers that allow you to produce “V” paneling fr om 1/2", 3/4", or 1" thick stock. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on table-mounted portable routers.
An important point after buying a device Freud Joinery Router (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Freud Joinery Router yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Freud Joinery Router - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Freud Joinery Router you will learn all the available features of the product, as well as information on its operation. The information that you get Freud Joinery Router will certainly help you make a decision on the purchase.
If you already are a holder of Freud Joinery Router, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Freud Joinery Router.
However, one of the most important roles played by the user manual is to help in solving problems with Freud Joinery Router. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Freud Joinery Router along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
