

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/ PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK


ALPINE ELECTRONICS MARKETING, INC.
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
ALPINE ELECTRONICS FRANCE S.A.R.L.
6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia
(RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P. 50016, 95945 Roissy Charles de Gaulle
Shinagawa-ku, Tokyo 141-0031, Japan
Cedex, France Phone 01-48638989
ALPINE ELECTRONICS OF AMERICA, INC.
Frankfurter Ring 117, 80807 München, Germany Phone 089-32 42 640
19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
ALPINE ELECTRONICS OF U.K. LTD.
ALPINE ELECTRONICS OF CANADA, INC.
Alpine House Fletchamstead Highway, Coventry CV4 9TW, U.K.
7300 Warden Ave., Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Phone 0870-33 33 763
Portal de Gamarra 36, Pabellón, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588
Dalian Ikemiya Printing Co., Ltd. 4 Jin Zhou Street Economic & Technical Development, Dalian, China
Designed by ALPINE Japan
Printed in China (Y)





DO NOT WATCH VIDEO WHILE DRIVING. Watching the video may distract the driver from looking ahead of the vehicle and cause an accident.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY. When inserting the batteries, be sure to observe proper polarity (+ and –) as instructed. Rupture or chemical leakage from the battery may cause fire or personal injury.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT PANEL OR MOVING MONITOR IS IN MOTION. Failure to do so may result in personal injury or damage to the product.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING. Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING. Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the product.

Irregular Shaped Discs Be sure to use round shaped discs only for this unit and never use any special shaped discs. Use of special shaped discs may cause damage to the mechanism.
Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
Temperature Do not operate your unit in ambient temperature above +60°C (+140°F) or below -10°C (+14°F).
Installation Location Make sure the DVA-5210 will not be installed in a location subjected to:
Moisture Condensation You may notice the disc playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.
Damaged Disc Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.
Correct Handling Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.
Maintenance If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.
Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off.


Disc Cleaning Fingerprints, dust, or soil on the surface of the disc could cause the DVD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the center of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.
Inserting Discs Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc. Make sure the label side is facing up when you insert the disc. Press c to eject any disc that is inserted incorrectly. Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.

New Discs As a protective measure to prevent the disc from jamming, press c to eject any disc with irregular surface or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the center hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ball-point pen or other such instrument, then insert the disc again.
Disc Accessories There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause operational problems. We recommend not using these accessories on discs played in Alpine DVD players.
Center Hole New Disc
Disc Stabilizer Transparent Sheet
Center Hole · Bumps · Outside (Bumps)

Discs that cannot be played DVD-ROMs, DVD-RAMs, DVD + Rs, DVD + RWs, CD-ROMs (excluding MP3/WMA files), photo CDs, etc.
Playable Discs The discs listed below can be played on this unit.
DVD region number (playable region number) This DVD player will play back any disc whose region number is 2 (or All). DVDs with a region number other than those listed below, cannot be played on this DVD player.
Video CDs This DVD head unit is compatible with playback control (PBC) compatible video CDs (version 2.0). “PBC” is a function by which you can use menu screens recorded on the disc to find the scene you want to watch and view various types of information in dialog style.
Using compact discs (CD/CD-R/CD-RW) If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordable)/CD-RWs (CD- ReWritable) which have been recorded only on audio devices. You can also play CD-Rs/CD-RWs containing MP3/WMA formatted audio files.
The following information is designed to help you create your own music CDs (either Audio CD or MP3/WMA encoded CD-R/ RW files).
What is the difference between an Audio and MP3/WMA CD? An Audio CD is the same format as the commercial CDs you buy in the store (also known as CD-DA). MP3 (MPEG-1 Audio Layer 3)/WMA (Windows Media Audio) is a data file that uses a compression scheme to reduce the size of the music file.*
Hybrid Audio CD and Data (MP3/WMA) CD-R/RW discs: The DVA-5210 can read either sector on the disc. Choose CD-DA to play the CD audio section or MP3/WMA to play the MP3/ WMA section.*

Multisession CD-R/RW: Once a recording has been stopped, this is considered one session. If the disc is not closed (finalized), additional data may be added. Once this additional data has been recorded, this becomes a “multisession” CD. The DVA-5210 can only read multisession DATA Formatted discs (MP3/WMA files - Not Audio CD files).
Title If titles are programmed for the DVD, these are the largest units of division of the information recorded on the disc.
Chapter Each Title may also be divided into smaller divisions, called chapters. These can be specific scenes or musical selections.
MP3 ID3 Tag/WMA Tag Information: The DVA-5210 read and displays MP3 ID3v1 tag or WMA tag information. MP3 files created with ID3v2 tag information can be played back but the tag info cannot be read or displayed.
Properly formatted MP3/WMA Discs: Use ISO9660 formatting to insure proper playback. You may use standard ISO naming Level 1 (8.3 DOS standard), Level 2 (32 characters) or Joliet (Windows or Macintosh long filenames) file naming conventions*.
*Please consult the Owner’s manual for additional information.
Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the disc and you may not be able to play it again.

Getting Started
Battery type: CR2025 battery or equivalent. 1 Opening the battery case Slide out the battery cover while firmly pressing in the direction of the arrow.

When Using the Remote Control
2 Replacing the battery Put the battery in the case with the (+) indication upward as shown in the illustration.

shock. - Do not put in a trouser pocket. - Keep away from food, moisture and dirt. - Do not place in direct sunshine.

3 Closing the cover Slide the cover as illustrated until a click is heard.
Play Position Memory Function If you turn power off or switch the ignition key to OFF during playback or change the source, playback will continue from the point where playback stopped when the power is turned ON again. The play position memory is canceled when the disc is removed.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
To customers connecting the head unit without Ai-NET. When using this unit without an Ai-NET connection, read “Setting the System Switch” on page 32 and set “system switching” to “2” (STANDALONE). 1 Press PWR of the remote control. The power turns on. 2 To turn the power off, press PWR again.

3 Close the door. Be sure to close the door to prevent dust from entering the unit.
Be sure to press the RESET button when using the unit for the first time, after installing the CD changer, after changing the car battery, etc. 1 Turn off the unit power. 2 Open the door. Refer to “Loading and Unloading Discs” on this page. 3 Press RESET with a ball-point pen or similar pointed object.
Unloading discs 1 Slide the door down to open. 2 Press c. Be sure to remove the disc.
Set the output configuration to NTSC or PAL, depending on the disc.
Press and hold the PWR button for at least 2 seconds.
Turn on the power before loading and unloading discs. (Refer to “Turning the power on and off” on page 8.)
Loading discs 1 Slide the door down to open.
2 Insert the disc with the label side facing upwards. Once the disc is partially inserted, it is drawn in automatically. Playback starts.

DVD/Video CD
On DVDs and video CDs with playback control (PBC), menu screens may appear automatically. If this happens, perform the operation described below to start playback.
MENU
DVD menu
: ENT. 9
Press 8, 9, ; or : to select the desired item, then press ENT.
:/J g
number keys (0 to 9)
Use the number keys (“0” to “9”) to select the desired number, then press ENT.
V.OUT
REPEAT
ANGLE
SUBTITLE
Stopping Playback (PRE-STOP)
Press L during playback to stop playback. That position is stored in memory. 1 Press L during playback. “PRE-STOP” is displayed. 2 Press -/J in the PRE-STOP mode. Playback starts from the position at which it was stopped.
Press L twice during playback. “STOP” is displayed, and playback stops.
Insert a disc with the label side facing up.
To load discs, see “Loading and Unloading Discs” on page 9.
Fast-forwarding/Fast-reversing 1 During playback, press and hold g (fast-reverse) or f (fast-forward) . When pressed for more than 1 second, the disc is forwarded/reversed at double speed. When held in 5 more seconds, the disc is forwarded/ reversed at 8 times the normal speed. 2 Release g or f to return to normal playback.
Playback starts. The front panel VIDEO indicator lights in amber during playback.
; · f

Searching by Title Number (DVD only)
During playback, press g or f. The chapter/track switches each time the button is pressed, and playback of the selected chapter/track starts.
Use this function to easily find positions on the DVD using the DVD’s title. 1 When playback stops, input the number of the title you want to play using the number keys (“0” to “9”). 2 Press ENT. Playback starts from the selected title number.
the following chapter or track.
the current chapter or track.
“Chapters” are divisions of movies or musical selections on DVDs. “Tracks” are divisions of movies or musical selections on video and music CDs.
Playing Still Frames (pausing) 1 During playback, press -/J. 2 Press -/J to resume playback.
Use this function to easily move to the beginning of the chapters or tracks on the disc. 1 During playback or pre-stop, input the number of chapter or track you desire by using the number keys (“0” to “9”). 2 Press ENT. Playback starts from the selected chapter or track.
Frame-by-frame Playback 1 In the pause mode, press f. The picture advances by one frame each time the button is pressed. 2 Press -/J to resume normal playback.
Slow Motion Playback 1 When f is pressed and held in while in the pause mode, the slow motion playback mode is set. 2 Release f to pause, and press -/J to playback.
Supplementary explanation

Switching the Angle (DVD only)
Use this function to play the disc’s titles, chapters or tracks repeatedly.
On DVDs in which scenes have been filmed from multiple angles, the angle can be switched during playback.
During playback, press REPEAT. The repeat mode switches each time the button is pressed.
During playback, press ANGLE. The angle switches between the angles recorded on the disc each time the button is pressed.
The chapter is played repeatedly.
displayed first, after which the angle switches.
The title is played repeatedly.
The mode returns to normal playback. (Factory default)
With multiple subtitle language DVDs, the subtitle language can be switched during playback, or subtitles can be hidden.
The track is played repeatedly.
During playback, press SUBTITLE. The subtitle switches between the languages recorded on the disc and OFF each time the button is pressed.
The entire disc is played repeatedly
DVDs can have up to 8 different audio tracks. These alternate tracks can be switched during playback.
Switching from the disc menu. For some discs, the audio language, angle and subtitles can be switched from the disc menu.
During playback, press AUDIO. The sound switches between the alternate audio tracks recorded on the disc each time the button is pressed.
1 Press MENU, select the item, then press ENT. 2 Press 8, 9, ; or : to select the language or angle, then press ENT. (For some discs, they can be selected using the number keys “0” to “9” while the language or the angle menu is displayed.)
During playback, press AUDIO. The left and right channels will be output as shown in the figure below, each time the button is pressed.
(Factory default)

To Output DVD Video While Listening to Another Source (CD/radio etc.) (only when using Ai-NET)
Use the procedure described below to display the status (title number, chapter number, etc.) of the currently playing DVD on the monitor screen.
When the DVA-5210 is connected to an Ai-NET compatible head unit or Ai-NET compatible AV head unit, DVD video can be output independently on the monitor. If the rear monitor is connected, DVD video and audio can be output independently on the rear monitor. For example, DVD video can be output on the front or rear monitor, while listening to the CD/radio from the head unit. 1 Change the source on the head unit or AV head unit’s to CD or radio, etc. 2 Select the DVD image from this unit with the V.SEL button (use the Simultaneous Function) on the AV head unit or front monitor. 3 Press V.OUT on the remote control for this unit. You can watch the DVD/video CD. 4 After using this function, press V.OUT to deactivate the video output mode.
During playback, press DISPLAY. The playback status is displayed for 5 seconds.
TV system (NTSC or PAL) Playback disc
D I S C N T S C D V D T I TL E D
number Current chapter number
0 0 1 8 ' 5 6 "
U D I O A D O L B Y D 3 / 2 . 0 1 / 3
: : :
S U B T . J A P A N E S E 0 1 / 0 4
Displaying the Disc Status (Video CD only)
Use the procedure described below to obtain an on-screen display of the status (track number, etc.) of the currently playing video CD on the monitor screen.
To watch the DVD on the rear monitor 5 See “Rear Monitor Select Function (AUX OUT)” in the AV head unit or front monitor’s owner’s manual to select the DVD image from this unit.
During playback, press DISPLAY. The playback status is displayed for 5 seconds.
TV system (NTSC or PAL) Playback disc
If the power or the ignition key is turned off without canceling the video output mode, the set will start up in the video output mode the next time the power is turned on, and the DVA-5210’s power will remain on even if the source is switched with the head unit/ AV head unit or if you try to turn off the power of the DVA-5210. If this happens, press V.OUT to cancel the video output mode.
D I S C N T S C V C D T I TL E D
CD V I DEO
number Track playback time Repeat setting
1 3 ' 5 6 "
B C O P N
(PBC)

CD
Press REPEAT to play back repeatedly the track being played. The track will be played repeatedly.
Press REPEAT again and select OFF to deactivate repeat play.
REPEAT
M.I.X.
Playback 1 Insert a disc with the label side facing up. To load discs, see “Loading and Unloading Discs” on page 9. Playback starts. The front panel AUDIO CD indicator lights in amber during playback. 2 Press g or f to select the desired track.
Returning to the beginning of the current track:
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track :
Press f.
Fast forward :
Press and hold f. 3 To pause playback, press -/J. Pressing -/J again will resume playback.
Press M.I.X. in the play or pause mode. The tracks on the disc will be played back in random sequence.
To cancel M.I.X. play, press M.I.X. again.
g · f

MP3/WMA
Press FOLDER 8 or FOLDER 9 to select the folder.
The unit can be set to play only the audio data or only the MP3/WMA files on discs containing both audio data and MP3/WMA data (when using discs containing both audio data and MP3/WMA data). 1 Press SETUP before inserting a disc. The setup menu appears on the monitor screen.
LIST
: ENT. 9
RETURN
:/J g
FOLDER 8
L A N G U A G E S :
T V S C R E E N 1 6 : 9
C O U N T R Y C O D E 6 8 6 9
P A R E N T A L O F F :
P L A Y M O D E C D - D A
D I G I T A L O U T A U T O
C U S T O M S E T U P :
M.I.X.
2 Press 8 or 9 to select “PLAY MODE”. 3 Press ;, : or ENT. to select CD-DA or MP3/WMA.
Plays only audio data on discs containing both audio data and MP3/WMA data. The initial setting at the factory is CD-DA.
The DVA-5210 will play back MP3/WMA files stored on CD-ROMs, CD-Rs, and CD-RWs. The format used must be compliant with ISO 9660 level 1 or level 2. For further information about playing or storing MP3/WMA files, refer to pages 16 and 17 before using the unit. A WMA format file that is protected by DRM (Digital Rights Management) cannot be played back on this unit. 1 Insert a disc containing an MP3/WMA file with the label side facing up. To load discs, see “Loading and Unloading Discs” on page 9. Playback starts. The front panel MP3/WMA indicator lights in amber during playback. 2 Press g or f to select the desired track.
Plays only MP3/WMA files on discs containing both audio data and MP3/WMA data. 4 Press SETUP. The settings are stored and the setup mode is deactivated.
Returning to the beginning of the current track:
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track :
Press f.
Fast forward :
Press and hold f. 3 To pause playback, press -/J. Pressing -/J again will resume playback.
; · f

About MP3/WMA
Press M.I.X. in the play or pause mode. The M.I.X. mode switches each time the button is pressed.
Except for private use, duplicating audio data (including MP3/ WMA data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty.
Only files in a folder are played back in a random sequence.
The files on the disc will be played back in a random sequence.
MP3 (MPEG-1 Audio Layer 3) is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG, which is a joint activity institution of the IEC.
Press M.I.X. again and select OFF to deactivate the M.I.X. play.
MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds.
During playback, press REPEAT. The repeat mode switches each time the button is pressed.
The file is played repeatedly.
WMA, or “Windows Media™ Audio,” is compressed audio data. WMA allows you to create music files and store them at higher ratios of compression than MP3 audio data (approx. half original size). This is achieved while still maintaining CD quality sound.
Only files in a folder are repeatedly played back.
Method for creating MP3/WMA files
Press REPEAT again and select OFF to deactivate the repeat play.
Audio data is compressed by using MP3/WMA specified software. For details on creating MP3/WMA files, refer to the user's manual for that software. MP3/WMA files that can be played back by this device have the file extension “mp3”/“rmp”, “wma”. Files with no extension cannot be played back. (WMA ver. 7.1 and 8 are supported)
You can display the names of folders/files and search for a folder/file to play. 1 Press LIST during playback. The Folder Name list is displayed. Each press changes the list.
Supported playback sampling rates and bit rates
WMA Sampling rates: 32 kHz - 48 kHz Bit rates: 32 - 192 kbps Note that for sampling rates such as 22.05 kHz, this device may not display correctly.
Folder Name list → File Name list → List display OFF → Folder Name list 2 Press 8 or 9 to select a folder/file name, then press ENT.
This device supports ID3 tag v1 and WMA tag. If tag data is in an MP3/WMA file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data.
This device can only display single-byte alphanumeric characters and the underscore.
MP3/WMA files are prepared, then written to a CD-R or CD- RW using CD-R writing software. A disc can hold a maximum of 255 files, and 255 folders.
The media that this device can play back are CD-ROMs, CD- Rs, and CD-RWs.

This device supports discs formatted with ISO9660 Level 1 or Level 2.
This is the “sound” compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files.
Under the ISO9660 standard, there are some restrictions to remember. The maximum nested folder depth is 8 (including the root directory). File/folder names are limited to 31 characters (including the extension). Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and ‘_’ (underscore).
This value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so the sound is sampled (recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data.
This device also can play back discs in Joliet, etc., and other standards that conform to ISO9660. However, sometimes the file names, folder names, etc., are not displayed correctly.
Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format.
This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD (CD-Extra) and Multi-Session. This device cannot correctly play back discs recorded with Track At Once or packet writing.
Song information such as track title, artist name, album name, etc., written into MP3/WMA files. MP3: ID3 tag WMA: WMA tag
The unit plays the files in the order that the writing software writes them. Therefore, the playing order may not be the same as the order you input. The playback order of the folders and files is as follows. However, the folder and file playback order differs from the folder no. and file no. indicated on the display.
The root folder is found at the top of the file system. The root folder contains all folders and files.


The audio language, subtitle language and menu language can be set according to your preferences. Once set, this becomes the default language. This function is convenient when you always want to listen in English. (Not all discs allow changing the default language. If not, the factory default language applies.)
: ENT. 9
RETURN
MENU: Set the language used for the menus (title menu, etc.). AUDIO: Set the audio track language. SUBTITLE: Set the language of the subtitles displayed on the screen.
number keys (0 to 9)
A U D I O A U T O
S U B T I T L E A U T O ; R E T U R N
Setting contents: AUTO ∗1 / OTHERS ∗2 / ENGLISH / JAPANESE / GERMAN / SPANISH / FRENCH / HINDI / HUNGARIAN / ITALIAN / YIDDISH / PORTUGUESE / RUSSIAN / CHINESE
Press ; or : to select your desired language.
The following steps 1 to 4 are common operations to each setting item of DVD settings. Refer to each section for details.
The disc is played with the audio language or subtitle language set as the priority language for the disc. ∗2 OTHERS:
Set this to play the disc with a language other than one of the languages displayed. Press ENT. then use the number keys “0” to “9” to input the 4-digit language code. Then press ENT. again. For the language codes, refer to “List of Language Codes” (page 25).
1 Press SETUP before inserting a disc, or when in stop mode. The setup menu appears on the monitor.
L A N G U A G E S :
T V S C R E E N 1 6 : 9
C O U N T R Y C O D E 6 8 6 9
P A R E N T A L O F F :
P L A Y M O D E C D - D A
D I G I T A L O U T A U T O
C U S T O M S E T U P :
2 Press 8 or 9 to select your desired setting item. If - is indicated at the right of the item, select the item then press - or ENT. Further items will be displayed.
Setting items: LANGUAGES / TV SCREEN / COUNTRY CODE / PARENTAL / PLAY MODE*1 / DIGITAL OUT / CUSTOM SETUP*2
Use the procedure described below to set the output screen according to the type of TV monitor being used.
*1 Refer to “Playing MP3/WMA Data” on page 15. *2 Refer to “Custom Setup” on page 20. 3 Press ;, : or ENT. to change the setting. 4 Press SETUP. The settings are stored and the setup mode is deactivated.
;

16:9 (WIDE) Select this when connected to a wide screen TV. This is selected upon shipment from the factory.

2 Use the number keys “0” to “9” to input the 4-digit password, then press ENT.
Input numbers are displayed as “∗.“ The default password is 1111 upon shipment from the factory. The restriction level (PARENTAL LEVEL) input display appears.
4:3 LB (LETTER BOX) Select this when connected to a conventional 4:3 size (normal TV aspect ratio) monitor. There may be black bands visible at the top and bottom of the screen (when playing a 16 : 9 size movie). The width of these stripes will depend upon the original aspect ratio of the theatre release of the movie.
3 Press 8 or 9 to select the “PARENTAL LEVEL”.
4:3 PAN (PAN- SCAN) Select this when connected to a conventional 4:3 size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible (when playing a 16 : 9 size movie).
P A R E N T A L L E V E L O F F
P A S S W O R D C H A N G E ∗∗∗∗ ; R E T U R N
4 Press ;, : or ENT. to select the restriction level (1 to 8), then press ENT.
Select “OFF” to cancel the parental lock or if you do not want to set a rating level. The lower the number, the higher the rating level.
Set the country code when setting the rating level (Parental lock).
1 Press 8 or 9 to select “COUNTRY CODE,” then press ENT. “COUNTRY CODE” will be reset.
5 Press SETUP. The settings are stored and the setup mode is deactivated.
2 Use the number keys “0” to “9” to input the 4-digit country code, then press ENT. Example: Germany “6869” is input

Use this function to restrict the viewing of movies to children of appropriate age levels only.
1 Press 8 or 9 to select “PARENTAL,” then press ENT. The password input mode is activated.

Custom Setup
Use the following procedure to set the digital audio signal output from the DVA-5210.

to the type of audio signal being played. Be sure to select “AUTO” when you want to connect a digital audio processor and play Dolby Digital audio. “AUTO” is selected upon shipment from the factory. LPCM: The audio signal recorded on the disc is converted to
48 kHz/16 bit (for DVDs) or 44.1 kHz (for video CDs and CDs) linear PCM audio signals for output.

Stream LPCM Encode 2ch Down mix (48kHz/16bit) Dolby Digital
The following steps 1 to 5 are common operations to each setting item of CUSTOM SETUP. Refer to each section for details.
48kHz/ 16bit 48kHz/ 20bit 48kHz/ 24bit 96kHz/ 16bit 96kHz/ 20bit 96kHz/ 24bit
1 Press SETUP before inserting a disc, or when in stop mode. The setup menu appears on the monitor.
L A N G U A G E S :
T V S C R E E N 1 6 : 9
C O U N T R Y C O D E 6 8 6 9
P A R E N T A L O F F :
P L A Y M O D E C D - D A
D I G I T A L O U T A U T O
C U S T O M S E T U P :
2 Press 8 or 9 to select “CUSTOM SETUP,” then press : or ENT. 3 Press 8 or 9 to select your desired setting item.
C U S T O M L S E T U P
A I - N E T S E T U P F U L L
T I T L E S C R O L L T Y P E 1
A U T O S C R O L L A U T O ; R E T U R N
4 Press ;, : or ENT. to change the setting.

5 Press SETUP. The settings are stored and the setup mode is deactivated.
Set the scroll type for CD TEXT information of audio CDs, or tag information (album name, artist name) of MP3/WMA.
simultaneously. The factory default is TYPE1. TYPE2: 2 lines of CD TEXT and tag information are scrolled in
Use the connected Ai-NET compatible head unit or AV head unit to display the information from the disc being played on the DVA-5210.
turn.
CD TEXT information of audio CDs, or tag information (album name, artist name) of MP3/WMA can be scrolled.
unit (e.g. IVA-D300R) marketed after December 2003. The information compatible with the displays on these AV head units will be transferred. The factory default is FULL. TIME: When connecting to an Ai-NET compatible AV head
AUTO: The CD TEXT and tag information will be automatically scrolled. MANUAL:The CD TEXT and tag information will not be
unit marketed before January 2004 (e.g. IVA-D900R) or an Ai-NET compatible head unit. Playback time and track no. display information will be transferred to the head unit. Other information, such as CD TEXT, titles, etc., cannot be displayed on the head unit. If set to FULL with one of these head units connected, the head unit cannot recognize the information from the DVA-5210, so even playback time and track no. will not be displayed properly.
scrolled. The factory default is MANUAL.
This function will give audible feedback with varying tones depending upon the button pressed.
ON: Activate the Sound Guide mode.
The initial setting at the factory is BEEP ON. OFF: Deactivate the Sound Guide mode. The sound guide
beep will not be produced when a button on the unit is pressed.

Playing DVDs, video CDs, CDs and MP3/WMA 1 Press SOURCE and select the DVD mode.
Operating from the Head Unit
DVD mode:
The power of the DVA-5210 turns ON and playback starts automatically.
Other modes:
The power of the DVA-5210 turns OFF automatically. 2 To set the pause mode, press -/J. Press -/J again to resume playback.
5 ( ) (M.I.X.)
The DVA-5210 can also be operated from the ALPINE Ai-NET compatible head unit. Refer to the manual of the head unit. Note that some of the functions cannot be operated from the DVA- 5210.
SOURCE
Switches the audio source. Turns the DVD player’s power ON in the DVD mode. Turns OFF in a mode other than main DVD.
Switches the display pattern of the head unit.
M.I.X.
Starts playback from the beginning of the following chapter/track. When pressed and held in, fast-forwards the disc.
Starts playback from the beginning of the current chapter/track. When pressed and held in, fast-reverses the disc.
Switches between play and pause.
Adjust the volume.

In addition, DVDs offer a variety of functions.
Music CDs and DVDs have grooves (tracks) in which the digital data is recorded. The data is represented as microscopic pits recorded into the track – these pits are read by a laser beam to play the disc. On DVDs, the density of the tracks and pits is twice that of CDs, so DVDs can contain more data in less space.
Minimum pit length - 0.9 µm 1.2 mm Track pitch - 1.6 µm
* The functions, audio languages, subtitle languages, angles, etc., differ from disc to disc. For details, refer to the disc’s instructions.
Minimum pit length - 0.9 µm 0.6 mm 0.6 mm
Track pitch - 0.74 µm
A 12 cm disc can contain one movie or about four hours of music. In addition, DVDs provide sharp picture quality with vivid colors thanks to a horizontal resolution of over 500 lines (compared to less than 300 for VHS tape). With the addition of an optional, digital audio processor (PXA-H900, PXA-H510, PXA-H700), you can recreate the power and presence of a movie theater with Dolby Digital 5.1-channel Surround.

Dolby Pro Logic is the technology used to decode programs encoded in Dolby Surround. Pro logic decoding will provide you with four channels of sound (front left/right, center and monaural rear surround) from a 2-channel (stereo) source. * The separately sold digital audio processor (PXA-H510, PXA- H900) is required to enjoy Dolby Pro Logic surround sound.
Dolby Digital is a digital audio compression technology developed by Dolby Laboratories that allows large quantities of audio data to be efficiently recorded on discs. It is compatible with audio signals from mono (1 channel) all the way up to 5.1-channel surround sound. The signals for the different channels are completely independent, and since the sound is high quality digital there is no loss of sound quality. * The separately sold digital audio processor (PXA-H510, PXA- H900, PXA-H700) is required to enjoy full 5.1-channel surround sound.
Dolby Pro Logic II plays 2-channel sources in 5 channels over the entire frequency range. This is done with an advanced, high sound quality matrix surround decoder which draws out the spatial properties of the original recording without adding any sounds to or changing the sound of the source. * The separately sold digital audio processor (PXA-H700) is required to enjoy Dolby Pro Logic II surround sound.
The DVA-5210 performs Dolby Digital decoding when it outputs analog audio signals; 2-channel audio, not 5.1- channel.
LPCM is a signal recording format used for music CDs. Whereas music CDs are recorded at 44.1 kHz/16 bits, DVDs are recorded at 48 kHz/16 bits to 96 kHz/24 bits, thereby achieving higher sound quality than music CDs.
Rating levels (parental lock)
This is a DVD function for restricting the viewing age as stipulated by censorship laws in different countries. The way in which viewing is restricted differs from DVD to DVD. Sometimes the DVD cannot be played at all, other times certain scenes are skipped, and other times certain scenes are replaced with other scenes.
Rear speakers
Subwoofer
Speaker layout for enjoying Dolby Digital sound/dts sound
DTS
This is a home-use digital sound format of the DTS Sound System. This is a high quality sound system, developed by Digital Theater Systems Corp. for use in movie theaters. DTS has six independent sound tracks. The theater presentation is fully realized in the home, etc. DTS is the abbreviation for Digital Theater System. * To enjoy DTS surround sound you need the separately sold DTS digital audio processor (PXA-H900, PXA-H700). The DVD video software must also have a DTS sound track.
The DVA-5210 has a built-in DTS 2-channel audio decoder. Analog audio outputs are available.

(For details, see page 18.)
Language Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua
Language Interlingue Inupiak Indonesian Icelandic Italian Hebrew Japanese Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean Kashmiri Kurdish Kirghiz Latin Lingala Laothian Lithuanian Latvian, Lettish Malagasy Maori Macedonian Malayalam Mongolian Moldavian Marathi Malay Maltese Burmese Nauru Nepali Dutch Norwegian Occitan (Afan) Oromo Oriya Punjabi Polish Pashto, Pushto Portuguese Quechua Rhaeto-Romance
Language Kirundi Romanian Russian Kinyarwanda Sanskrit Sindhi Sangho Serbo-Croatian Singhalese Slovak Slovenian Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swedish Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tonga Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Wolof Xhosa Yoruba Chinese Zulu
AA AB AF AM AR AS AY AZ BA BE BG BH
6565 6566 6570 6577 6582 6583 6589 6590 6665 6669 6671 6672 6673 6678 6679 6682 6765 6779 6783 6789 6865 6869 6890 6976 6978 6979 6983 6984 6985 7065 7073 7074 7079 7082 7089 7165 7168 7176 7178 7185 7265 7273 7282 7285 7289 7365
7369 7375 7378 7383 7384 7387 7465 7473 7487 7565 7575 7576 7577 7578 7579 7583 7585 7589 7665 7678 7679 7684 7686 7771 7773 7775 7776 7778 7779 7782 7783 7784 7789 7865 7869 7876 7879 7967 7977 7982 8065 8076 8083 8084 8185 8277
8278 8279 8285 8287 8365 8368 8371 8372 8373 8375 8376 8377 8378 8379 8381 8382 8383 8384 8385 8386 8387 8465 8469 8471 8472 8473 8475 8476 8478 8479 8482 8483 8484 8487 8575 8582 8590 8673 8679 8779 8872 8979 9072 9085
JI JW KA KK KL KM KN KO KS KU KY LA LN LO
SI SK SL SM SN SO SQ SR SS ST SU SV SW
BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU
TA TE TG TH
MI MK ML MN MO MR MS MT MY NA NE NL NO OC OM OR
TI TK TL TN TO TR TS TT TW
FI FJ FO FR FY GA GD
UK UR UZ
GL GN GU HA
VI VO WO
PA PL PS PT QU RM
XH YO ZH ZU
HI HR HU HY
IA

(For details, see page 19.)
Country Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria Australia Aruba Azerbaijan
Country Country Code Code Abbreviation Abbreviation
6568 6569 6570 6571 6573 6576 6577 6578 6579 6581 6582 6583 6584 6585 6587 6590 6665 6666 6668 6669 6670 6671 6672 6673 6674 6677 6678 6679 6682 6683 6684 6686 6687 6689 6690 6765 6767 6768
6877 6879 6890 6967 6969 6971 6972 6982 6983 6984 7073 7074 7075 7077 7079 7082 7165 7166 7168 7169 7170 7172 7173 7176 7177 7178 7180 7181 7182 7183
Dominica Dominican Republic Algeria Ecuador Estonia Egypt Western Sahara Eritrea Spain Ethiopia Finland Fiji Falkland Islands
7573 7577 7578 7580
Kiribati Comoros Saint Kitts and Nevis Korea, Democratic People’s Republic of
AI AL AM AN AO AQ AR AS
KR KW
7582 7587 7589 7590 7665
Korea, Republic of Kuwait Cayman Islands Kazakstan Lao People’s Democratic Republic
FI FJ FK FM FO FR GA GB GD GE GF GH
7666 7667 7673 7675 7682 7683 7684 7685 7686 7689 7765 7767 7768 7771 7772 7775
Lebanon Saint Lucia Liechtenstein Sri Lanka Liberia Lesotho Lithuania Luxembourg Latvia
Micronesia, Federated States of Faroe Islands France Gabon United Kingdom Grenada Georgia French Guiana Ghana Gibraltar Greenland Gambia Guinea Guadeloupe Equatorial Guinea Greece
AZ BA BB BD BE BF BG BH
Bosnia and Herzegovina Barbados Bangladesh Belgium Burkina Faso Bulgaria Bahrain Burundi Benin Bermuda Brunei Darussalam Bolivia Brazil Bahamas Bhutan Bouvet Island Botswana Belarus Belize Canada
LV LY MA MC MD MG MH MK
Libyan Arab Jamahiriya Morocco Monaco Moldova, Republic of Madagascar Marshall Islands
BI BJ BM BN BO BR BS BT BV BW
Macedonia, The former Yugoslav Republic of Mali Myanmar Mongolia Macau
ML MM MN MO MP MQ MR MS MT MU MV MW
7776 7777 7778 7779 7780 7781 7782 7783 7784 7785 7786 7787 7788 7789 7790 7865 7867 7869 7870 7871 7873 7876 7879 7880 7882 7885 7890 7977 8065
South Georgia and the South Sandwich Islands
7184 7185 7187 7189 7275 7277
Guatemala Guam Guinea-Bissau Guyana Hong Kong Heard Island and McDonald Islands Honduras Croatia Haiti Hungary Indonesia Ireland Israel India
Northern Mariana Islands Martinique Mauritania Montserrat Malta Mauritius Maldives Malawi Mexico Malaysia Mozambique Namibia New Caledonia Niger Norfolk Island Nigeria Nicaragua Netherlands Norway Nepal Nauru Niue New Zealand Oman Panama
GY HK HM
Cocos (Keeling) Islands Congo, the Democratic Republic of the
7278 7282 7284 7285 7368 7369 7376 7378 7379 7381 7382 7383 7384 7477 7479 7480 7569 7571 7572
6770 6771 6772 6773 6775 6776 6777 6778 6779 6782 6785 6786 6788 6789 6790 6869 6874 6875
Central African Republic Congo Switzerland Cote d’lvoire Cook Islands Chile Cameroon China Colombia Costa Rica Cuba Cape Verde Christmas Island Cyprus Czech Republic Germany Djibouti Denmark
CI CK CL CM CN CO CR CU CV CX CY CZ DE
ID IE IL IN IO IQ IR IS IT JM JO JP KE KG KH
British Indian Ocean Territory Iraq
Iran, Islamic Republic of Iceland Italy Jamaica Jordan Japan Kenya Kyrgyzstan Cambodia
DJ DK
PA
Abbreviation · Code

Country Country Code Code Abbreviation Abbreviation Country Code Abbreviation
PE PF PG PH PK PL PM PN PR PT PW
8069 8070 8071 8072 8075 8076 8077 8078 8082 8084 8087 8089 8165 8269 8279 8285 8287 8365 8366 8367 8368 8369 8371 8372 8373
Peru French Polynesia Papua New Guinea Philippines Pakistan Poland
SJ SK SL SM SN SO SR ST SV SY SZ TC TD TF TG TH
8374 8375 8376 8377 8378 8379 8382 8384 8386 8389 8390 8467 8468 8470 8471 8472 8474 8475 8477 8478 8479 8480 8482 8484 8486
Svalbard and Jan Mayen Slovakia Sierra Leone San Marino Senegal Somalia Suriname Sao Tome and Principe El Salvador Syrian Arab Republic Swaziland
8487 8490 8565 8571 8577
Taiwan, Province of China
Tanzania, United Republic of Ukraine Uganda United States Minor Outlying Islands United States Uruguay Uzbekistan
8583 8589 8590 8665 8667
Saint Pierre and Miquelon Pitcairn Puerto Rico Portugal Palau Paraguay Qatar Reunion Romania Russian Federation Rwanda Saudi Arabia Solomon Islands Seychelles Sudan Sweden Singapore Saint Helena Slovenia
Holy See (Vatican City State) Saint Vincent and the Grenadines Venezuela Virgin Island, British Virgin Islands, U.S Viet Nam Vanuatu Wallis and Futuna Samoa Yemen Mayotte Yugoslavia South Africa Zambia Zimbabwe
Turks and Caicos Islands Chad
8669 8671 8673 8678 8685 8770 8783 8969 8984 8985 9065 9077 9087
French Southern Territories Togo Thailand Tajikistan Tokelau Turkmenistan Tunisia Tonga East Timor Turkey Trinidad and Tobago Tuvalu
TJ TK TM TN TO TP TR TT TV
YE YT YU ZA ZM ZW
SI

If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.
brake. (For details, refer to the monitor’s instructions.) • Monitor’s parking brake is not set. - Connect the monitor’s parking brake cord and set the parking
brake. (For details, refer to the monitor’s instructions.) Playback does not start. • Disc is loaded upside-down. - Check the disc and load it with the labeled side facing
No function or display. • Vehicle’s ignition is off. - If connected following the instructions, the unit will not
proper value. Disc playback sound is wavering. • Moisture condensation in the disc unit. - Allow enough time for the condensation to evaporate (about 1
and unloading discs” section. Unable to fast forward or reverse the disc. • The disc has been damaged. - Eject the disc and discard it; using a damaged disc in your
unit when an Ai-NET compatible (AV) head unit is connected.
again. If the above-mentioned solution does not solve the problem, consult your nearest ALPINE dealer. MP3 is not played back. • Writing error occurred. The CD format is not compatible. - Make sure the CD has been written in a supported format.
MP3/WMA Data” on page 15.)

possible. This is not a malfunction.
Battery Type CR2025 battery Width 51 mm (2") Height 119 mm (4-11/16") Depth 13 mm (33/64") Weight 50 g (1.75 oz) (battery excluded)
Power Requirement 14.4 V DC (11–16 V allowable) Operating Temperature +14°F to +140°F (-10°C to + 60°C) Audio Output Level
within operation range. - Leave the power OFF until the temperature decreases and
Width 178 mm (7") Height 50 mm (2") Depth 165 mm (6-1/2") Weight 1.5kg (3 lbs. 5 oz)
then turn the power ON again.
EJECT ERROR
CLASS 1
(Bottom side of player)
(Bottom side of player)
Frequency Response

Before installing or connecting the unit, please read the following and pages 3 and 4 of this manual thoroughly for proper use.
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.
MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL. Failure to do so may result in electric shock or injury due to electrical shorts.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc., can be extremely hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure. Precautions
DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER. Doing so may obstruct forward vision or hamper movement, etc., and result in a serious accident.
Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

Before deciding on the mounting location, check that opening and closing the display will not hamper the gear shift in any position.
Slide the DVA-5210 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel.
Removal 1 Use a small screwdriver (or similar tool) to push the locking pins to the “up” position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin. 2 Pull the unit out, keeping it unlocked as you do so.

Slide the mounting sleeve into the dashboard.
Screws (M5 × 8) (Included)
Screws (M5 × 8) (Included with the head unit)
DVA-5210
Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (∗1) already attached to the vehicle's chassis.
Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the DVA-5210. Connect all other leads of the DVA-5210 according to details described in the CONNECTlONS section.

Cable Color Cable Specifications
To remote control output lead
Connect to a metal part of chassis body with a screw
Fuse (7.5A)
Yellow • Battery Lead Connect this lead to the positive (+) post of the vehicle’s battery.
Switch to operate from either an Ai-NET compatible head unit or Ai-NET compatible AV head unit connected to this unit. Be sure to set the system switch before fastening the DVA-5210 in place. 1 Disconnect the power plug. 2 Set the system switch at the bottom of this unit with a pointed object.

Connecting a non Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H700, PXA-H900, etc.) and TV Monitor
Digital Input Terminal (Optical) (for DVD Player)
Digital Output Terminal (Optical)
PXA-H700, etc. (Sold Separately)
Head Unit non -compatible
Remote Turn-On Lead (Blue/White) Remote Turn-On Lead (Blue/White)
Monitor TME-M790, etc. (Sold Separately)
TME-M790, etc. (Sold Separately)
AUX Video Input Terminal (AUX1)
Only when connecting with rear monitor
AUX Audio Input Terminal (AUX1)
Remote Control Input Lead (White/Brown)
Remote Control Output Lead (AUX1) (White/Brown)
Setting of DVA-5210 The DVA-5210's system settings must be made after connections are completed. Before fixing the unit in place, refer to “Setting the System Switch” on page 32 and “Setting the Ai- NET” on page 21.
Setting Item System switch Ai-NET setting

Connecting an Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H700, PXA-H900, etc.) and TV Monitor
Monitor TME-M790 etc (Sold Separately)
CD Changer (Sold Separately)
TME-M790 etc (Sold Separately)
AUX Video Input Terminal (AUX1)
PXA-H700 etc (Sold Separately)
Remote Control Output Lead (AUX1) (White/Brown)
Digital Input Terminal (Optical) (for DVD Player)
Remote Control Input Lead (White/Brown)
Digital Output Terminal (Optical)
When connecting a digital audio processor using Ai-NET feature, place this switch in the EQ/DIV position.
DVA-5210
Head Unit with Ai-NET (Sold Separately)
Only when connecting with rear monitor
Setting of DVA-5210 The DVA-5210's system settings must be made after connections are completed. Before fixing the unit in place, refer to “Setting the System Switch” on page 32 and “Setting the Ai-NET” on page 21.
AV Head unit available after December
AV Head unit available before January
Setting Item System switch Ai-NET setting
2003 (IVA-D300R, etc.)
2004 (IVA-D900R, etc.) or Head unit.
TIME
The switched (ignition) power lead connection is not needed.

Monitor TME-M790, etc. (Sold Separately)
When an Ai-NET digital audio processor is not used, place this switch in the NORM position.
TME-M790, etc. (Sold Separately)
AUX Video Input Terminal (AUX1)
Head Unit with Ai-NET (Sold Separately)
Remote Control Output Lead (AUX1) (White/Brown)
Remote Control Input Lead (White/Brown)
CD Changer (Sold Separately)
Only when connecting with rear monitor
Setting of DVA-5210 The DVA-5210's system settings must be made after connections are completed. Before fixing the unit in place, refer to “Setting the System Switch” on page 32 and “Setting the Ai-NET” on page 21.
AV Head unit available after December
AV Head unit available before January
Setting Item System switch Ai-NET setting
2003 (IVA-D300R, etc.)
2004 (IVA-D900R, etc.) or Head unit.
TIME
The switched (ignition) power lead connection is not needed.

9 FOLDER 9 button Selects MP3/WMA folders. ! CLR (ALL CLR) button Removes numbers (one character at a time) that have been selected and input. Press and hold for 2 seconds. All the characters which were selected and input are erased. " REPEAT button Repeats playback. # M.I.X. button M.I.X. play for CDs and MP3/WMA $ AUDIO button Switches the audio tracks. % DISPLAY button Displays playback status on the screen. & MENU button Displays the DVD menu. ( TOP M. button Displays the title Menu. ) 8, 9, ;, : Selects the items displayed on the screen. ~ ENT. button Determines the selected item. + f button CD mode: Press the button to advance to the beginning of the next track. Press and hold to fast forward. MP3/WMA mode:
Press the button to advance to the beginning of the next file. DVD/Video CD:
1 PWR button Turns the power ON and OFF. 2 SETUP button Displays the SETUP (initial setting) screen. 3 LIST button Switches between Folder Search and File Search mode. 4 RETURN button Returns to the selection screen just prior to the current screen. 5 -/J button Switches between play and pause. 6 g button CD mode: Press the button to go back to the beginning of the current track. Press and hold to fast reverse. MP3/WMA mode:
Press the button to go back to the beginning of the current file. DVD/Video CD:

$ Turns the backlight on for the remote control buttons.
% Selects/decides an item on the screen.
Set the mode selector switch to “EXT DVD” to operate this unit.
& Returns to the previous screen.
( Outputs the DVD picture while another source is on. (Only for an Ai-NET connection.)

) Deletes one of the selected/inputted numbers. Press and hold to delete all of the selected/inputted numbers.
~ Switches audio. Press and hold to switch repeat mode.
+ Set to “EXT DVD” to operate this unit.
1 Transmits remote control signals.
2 Indicates EXT DVD transmission.
3 Switches folders.
5 Displays the DVD menu. Press and hold to access the SETUP (initial setting) screen.
6 Displays the playback status. Press and hold to display the title menu.
7 Inputs numbers.
8 Switches the angle. Press and hold to switch M.I.X. mode.
9 Switches the subtitle.
! Switches between play and pause.
" Switches the power on and off. Press and hold to switch between NTSC and PAL.
# Switches between chapter, track and file. Press and hold to fastforward/fastreverse.

Produkt-Informationskarte
Carte d’informations sur le produit
Tarjeta de información del producto
English
Deutsch
Français
Español
Filling in this Product Information Card is voluntary. If you fill in this card and send it to Alpine, your data will be tabulated into reference data for future Alpine product development. In addition, in the future you may receive information about new products or Survey Mail requesting additional opinions about Alpine products or services. If you agree to the above term, please sign your name in the indicated space and return the card. Any additional comments or inquiries may be sent to : Person in charge of Customer Service department Alpine Electronics (Europe) GmbH. Frankfurter Ring 117, 80807 München, Germany Phone: +49-(0)89-32 42 640
Das Ausfüllen dieser Produktinformations-Karte ist freiwillig. Sollten Sie diese Karte vervollständigen, so werden die Daten für zukünftige Produktentwicklungen von Alpine als Referenzdaten herangezogen. Ebenso können Sie in der Zukunft Informationen über neue Alpine Produkte erhalten oder uns auch Ihre Meinung über Alpine Produkte und Dienstleistungen im Rahmen von Kunden-Befragungen mitteilen. Stimmen Sie dem Kontakt durch Alpine zu, so würden wir Sie bitten, in dem dafür vorgesehenen Feld zu unterschreiben und die Karte kostenfrei an uns zurückzuschicken. Zusätzliche Kommentare und Meinungen können Sie gerne an den zuständigen Kontakt im Kundendienst Alpine Electronics (Europe) GmbH senden. Frankfurter Ring 117, 80807 München, Germany Phone: 089-32 42 640
En remplissant volontairement cette fiche, et en l’envoyant à Alpine, vous acceptez que ces informations soient utilisées par Alpine, dans le cadre de développement de nouveaux produits. Par ailleurs, vous autorisez Alpine à solliciter votre opinion par mailing sur de nouveaux produits ou services. Si vous acceptez les termes ci- dessus, veuillez signer cette carte à l’endroit indiqué, et nous la retourner. Tout autre commentaire ou demande doit être adressé à l’attention de: Responsable du service consommateur Alpine Electronics (Europe) GmbH. Frankfurter Ring 117, 80807 München, Germany Phone: +49-(0)89-32 42 640
El envío de la información solicitada es voluntario. Si Vd. nos la remite, será utilizada de modo confidencial para el desarrollo de futuros productos Alpine. Si Vd. desea recibir información sobre nuevos productos de nuestra gama, indique su nombre en el espacio designado y remítanos la tarjeta. Cualquier solicitud adicional puede ser enviada a : Persona responsable del Servicio de Atención al Cliente de Alpine Electronics (Europe) GmbH. Frankfurter Ring 117, 80807 München, Germany Phone: +49-(0)89-32 42 640
Q1. gekauftes Gerät
Q1. Producto Comprado
monitor? 1. Alpine → (Model No.) 2. Other → (Brand Name) Q5. STORE TYPE WHERE
Welcher Monitor? 1. Alpine → (Modellnr.) 2. Anderer Hersteller → (Herstellername) Q5. Art des Geschäfts, in dem Sie das
quel moniteur? 1. Alpine → (N° du modèle) 2. Autre → (Marque) Q5. TYPE DE MAGASIN OU VOUS
navegación, ¿qué monitor? 1. Alpine → (N° de modelo) 2. Otros → (Nombre de marca) Q5. TIPO DE TIENDA DONDE
PURCHASED: 1. Car Audio Specialist 2. Audio/Video Store 3. Electronics/Appliance Store 4. Car Accessories Shop 5. Other Q6. Type of vehicle in which this unit is
AVEZ ACHETE LE PRODUIT: 1. Spécialiste autoradio 2. Magasin audio/vidéo 3. Magasin d’électronique/appareils 4. Magasin d’accessoires automobiles 5. Autre Q6. Type de véhicule dans lequel cet
COMPRÓ: 1. Especialista en audio de automóviles 2. Tienda de audio/video 3. Tienda de electrónica/electrodomésticos 4. Tienda de accesorios automovilísticos 5. Otros Q6. Tipo de vehiculo en que la unidad
Gerät gekauft haben: 1. Spezialist für Auto-Audioanlagen 2. Audio/Video-Geschäft 3. Elektro-Geschäft 4. Autozubehör-Geschäft 5. Anderer Hersteller Q6. Art des Fahrzeugs, in das das
installed: Make: Model: Purchased Model Year: Year: Q7. How was this vehicle purchased?
véhicule? 1. Achat 2. Location-bail Q8. Pourquoi avez-vous acheté cet
vehiculo? 1. compra 2. Leasing Q8. ¿Propósito de comprar esta
gekauft? 1. Kauf 2. Leasing Q8. Zweck des Kaufs dieses Geräts?
appareil? 1. Addition 2. Remplacement ↓ • Marque précédente remplacée? 1. Installée en usine 2. Alpine 3. Autre → (Marque) Q9. Aviez-vous déjà acheté des
unidad? 1. Mejora del sistema 2. Sustitución ↓ • ¿Sustitución de marca anterior? 1. Instalado en la fábrica 2. Alpine 3. Otros → (Nombre de marca) Q9. ¿Ha comprado Vd. productos
products before? 1. First time 2. Two or More times Q10.When you purchased this Alpine
produits Alpine? 1. Première fois 2. Deux fois ou plus Q10.Lorsque vous avez acheté ce
Alpine anteriormente? 1. Primera vez 2. Dos o más veces Q10.Cuando usted compró esta unidad
ein Alpine-Gerät gekauft haben? 1. Erstes Mal 2. Zweites Mal oder öfter Q10.Haben Sie dieses Alpine-Gerät vor
unit, did you compare it with other brand? 1. Yes → (Brand Name) 2. No. Q11.GENDER
produit Alpine, l’avez-vous comparé à une autre marque? 1. Oui → (Marque) 2. Non Q11.SEXE
Alpine, ¿la comparó con otros fabricantes? 1. Si → (Nombre de marca) 2. No Q11.SEXO
dem Kauf mit Geräten anderer Hersteller verglichen? 1. Ja → (Herstellername) 2. Nein Q11.Geschlecht


Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.