EN
Alpine logo
Official user manual

Alpine CDA-9856

38 pages·2.1 MB·Car Stereo System·PDF·ENDEFRITNLJA
Alpine CDA-9856
Table of Contents 33 sections Owners Manual · Reset · Clock Set · Aux In Settings · … ShowHide
Page 1 of the Alpine CDA-9856 user manual — 68-04123Z46-A
Page 1 · click to enlarge
Page 1

R

MP3/WMA CD Receiver

CDA-9856

FR

ES

  • OWNER’S MANUAL Please read before using this equipment.
  • MODE D’EMPLOI Veuillez lire avant d’utiliser cet appareil.
  • MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo.

ALPINE ELECTRONICS MARKETING, INC.

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano

1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan

161-165 Princes Highway, Hallam Victoria 3803, Australia

Sul Naviglio (MI), Italy

ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 München, Germany

ALPINE ELECTRONICS DE ESPAÑA, S.A.

ALPINE ELECTRONICS OF AMERICA, INC.

Portal de Gamarra 36, Pabellón, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588

19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631)

Phone 089-32 42 640

ALPINE ELECTRONICS OF U.K. LTD.

Alpine House Fletchamstead Highway, Coventry CV4 9TW, U.K.

ALPINE ELECTRONICS (BENELUX) GmbH

ALPINE ELECTRONICS OF CANADA, INC.

777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-800-ALPINE-1 (1-800-257-4631)

Phone 0870-33 33 763

1930 Zaventem, Belgium Phone 02-725-13 15

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P. 50016, 95945 Roissy Charles de Gaulle

Cedex, France Phone 01-48638989

Dalian Dongtai Colour Printing Technology Co., Ltd. No.24 Liaohexisan Road, Dalian Economic&Technical Development Zone, China

Designed by ALPINE Japan

Printed in China (Y)

68-04123Z46-A

Show 4 more labels / short text on this page
Phone 03-8787-1200 · Phone 02-484781 · Phone 03-5496-8231 · Leuvensesteenweg 510-B6,
Page 2 of the Alpine CDA-9856 user manual — CHM-S630
Page 2 · click to enlarge
Page 2

CHM-S630

CHA-S634

CHA-1214

  • CD changer for CDA-9856
  • Changeur CD pour CDA-9856
  • Cambiador de CD para CDA-9856
  • CD changer for CDA-9856
  • Changeur CD pour CDA-9856
  • Cambiador de CD para CDA-9856

Alpine CD Changers Give You More! More musical selections, more versatility, more convenience. The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK and CD TEXT. The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S630 M-Bus model is a super-compact 6-disc changer with a CD-R/RW PLAY BACK.

Changeurs de CD Alpine : vous avez le choix! Plus de sélections musicales, plus de souplesse, plus de confort. Le modèle CHA-S634 est un changeur 6 disques ultra performant équipé des nouvelles fonctions M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK et CD TEXT. Le modèle CHA-1214 Ai-NET contient 12 disques. Le modèle CHM-S630 M-Bus est un changeur 6 disques super compact doté de la fonction CD-R/RW PLAY BACK.

¡Los cambiadores Alpine de CD le ofrecen más! Más selecciones musicales, más versatilidad y más ventajas. CHA-S634 es un cambiador de seis discos de alto rendimiento con nuevo M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK y CD TEXT. El modelo CHA-1214 Ai-NET alberga 12 discos y el modelo CHM-S630 M-Bus es un cambiador de seis discos de tamaño reducido con un CD-R/RW PLAY BACK.

Page 7 of the Alpine CDA-9856 user manual — Disc Compatibility
Page 7 · click to enlarge
Page 7
  • On handling Compact Discs (CD/CD-R/CD-RW)
  • Do not touch the surface.
  • Do not expose the disc to direct sunlight.
  • Do not affix stickers or labels.
  • Clean the disc when it is dusty.
  • Make sure that there are no bumps around the disc.
  • Do not use commercially available disc accessories.

Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again.

  • To customers using CD-R/CD-RW
  • If a CD-R/CD-RW cannot be played back, make sure the last recording session was closed (finalized).
  • Finalize the CD-R/CD-RW if necessary, and attempt playback again.

About media that can be played Use only compact discs with the label side showing the CD logo marks below.

If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordable)/CD-RWs (CD-ReWritable) which have been recorded only on audio devices. You can also play CD-Rs/CD-RWs containing MP3/WMA formatted audio files.

  • Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed or a re-recording was attempted, copy-protected CDs which do not conform to the audio CD industry standard.
  • Use discs with MP3/WMA files written in a format compatible with this unit. For details, see pages 11-12.
  • ROM data other than audio files contained in a disc will not produce sound when played back.
  • Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
  • Apple and the Apple logo are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. iPod and iPod mini are trademarks of Apple Computer, Inc.
  • “MPEG Layer-3 audio coding technology licensed from Fraunhofer llS and Thomson.”
  • “Supply of this product only conveys a license for private, noncommercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit <a href="http://www.mp3licensing.com.”" rel="nofollow noopener" target="_blank">http://www.mp3licensing.com.”</a>
Page 8 of the Alpine CDA-9856 user manual — Detaching and Attaching the Front Panel
Page 8 · click to enlarge
Page 8

Detaching 1 Turn off the unit power. 2 Press (OPEN) to open the front panel.

Alpine CDA-9856 — Getting Started diagram (page 8)
Fig. 1 · Getting Started

To close the front panel, press the left side until it locks as shown in the figure below.

MODE TITLE

Alpine CDA-9856 — MODE TITLE diagram (page 8)
Fig. 2
  • All English lower case characters are displayed as upper case on this unit.
  • The alphanumeric display in the following table shows alphanumeric characters/numbers that may be difficult to distinguish.

3 Grasp the front panel firmly, slide to the left , then pull to remove.

  • The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction.
  • To protect the front panel, place it in the supplied carrying case.
  • When detaching the front panel, do not apply excessive force as it may result in malfunction.
  • Do not leave the front panel open, or drive the car with the panel open as it may result in accident or malfunction.

Turning Power On and Off

Press SOURCE/POWER to turn on the unit.

Attaching 1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. 2 Push the left side of the front panel until it locks firmly into the main unit.

  • The unit can be turned on by pressing any other button except TITLE, Rotary encoder and (OPEN).

Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit.

  • The first time power is turned on, the volume will start from level 12.

Detaching and Attaching the Front Panel

Be sure to push the Rotary encoder inside the unit before opening the front panel so that the front panel will open completely, otherwise it may be damaged.

Push the Rotary encoder inside

  • Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.
  • Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.

When you push the Rotary encoder again, it pops back out.

The Rotary encoder pops out

Rotary encoder

Page 9 of the Alpine CDA-9856 user manual — Setting Time
Page 9 · click to enlarge
Page 9

Initial System Start-Up

  • Controllable with Remote Control This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer.
  • Point the optional remote control transmitter at the remote control sensor

Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 Turn off the unit power. 2 Press (OPEN) to open the front panel, then remove it. 3 Press RESET with a ballpoint pen or similar pointed object.

Adjusting Volume

Turn the Rotary encoder until the desired sound is obtained.

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume level by 20 dB.

Press MUTE to activate the MUTE mode. The audio level will decrease by about 20 dB.

Pressing MUTE again will bring the audio back to its previous level.

Setting Time

1 Press TITLE repeatedly until the time is displayed. For details, see “Displaying the Text” (page 15) 2 Press and hold TITLE for at least 2 seconds while the time is displayed. The time indication will blink. 3 Turn the Rotary encoder to adjust the hours while the time indication is blinking. 4 When the hour has been adjusted, press MODE. 5 Turn the Rotary encoder to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing TITLE.

  • To synchronize the clock to another clock/watch or radio time announcement, press and hold MODE for at least 2 seconds after setting the “hour.” Minutes will reset to 00. If the display shows over “30” minutes when you do this, the time will advance one hour.

Remote control sensor · RESET switch

Page 10 of the Alpine CDA-9856 user manual — Tuning to Preset Stations
Page 10 · click to enlarge
Page 10

Radio

Manual Storing of Station Presets

1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station. The selected station is stored. The display shows the band, preset number and station frequency memorized.

SOURCE/ POWER

TUNE/A.ME BAND

  • A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 and AM).
  • If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.

MODE

FUNC. Preset buttons (1 through 6)

This unit cannot receive HD Radio™ signals (digital terrestrial radio). In order to activate the digital radio functions described below, an optional HD Radio Tuner module must be connected through the Ai-Net bus. HD Radio™ Technology Manufactured Under License From iBiquity Digital Corporation. iBiquity Digital and the HD Radio and HD Symbols are trademarks of iBiquity Digital Corporation. U.S. and Foreign Patents.

Automatic Memory of Station Presets

1 Press BAND repeatedly until the desired radio band is displayed. 2 Press and hold TUNE/A.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location No. 1.

Listening to Radio

1 Press SOURCE/POWER until a radio frequency appears on the display. 2 Press BAND repeatedly until the desired radio band is displayed.

  • If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.

F1 (FM1) F2 (FM2) AM F1 (FM1) 3 Press TUNE/A.ME to select the tuning mode.

Tuning to Preset Stations

1 Press BAND repeatedly until the desired band is displayed. 2 Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected.

DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK

  • The initial mode is Distance mode.

Distance mode:

Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).

Local mode:

Only strong stations will be automatically tuned in (Automatic Seek Tuning).

Manual mode:

The frequency is manually tuned in steps (Manual tuning). 4 Press or to tune in the desired station. Holding down or will change the frequency continuously.

  • The “DIGITAL” indicator appears on the display when a digital radio station which contains both audio and text information, is received.

Rotary encoder

Page 11 of the Alpine CDA-9856 user manual — CHANGER * 3 TUNER
Page 11 · click to enlarge
Page 11

Frequency Search Function

CD/MP3/WMA

You can search for a radio station by its frequency. 1 Press and hold for at least 2 seconds in Radio mode to activate Frequency Search mode. 2 Turn the Rotary encoder to select the desired frequency.

(OPEN)

SOURCE/ POWER

Only when the Radio mode is active*

* Operation is not required during HD Radio reception. 3 Press MODE to receive the selected frequency.

MODE 4 5 TITLE

FUNC.

  • Press and hold for at least 2 seconds in the search mode to cancel. Or the search mode will be canceled when an operation has not been performed in 10 seconds.

Playback

Switching the HD Radio™ signal

1 Press (OPEN). The front panel will open. 2 Insert a disc with the label side facing up. The disc will be pulled into the unit automatically.

HD Radio™ can be received if the HD Radio TUNER MODULE (TUA-T500HD) is connected. While receiving HD Radio, the unit can automatically switch between the analog and digital signal. You can also switch to the analog signal exclusively. 1 When receiving HD Radio, press FUNC. to select on. The currently received status is displayed. 2 Press preset 1 to switch the receiving signal.

DIG/ANA MODE ANALOG ONLY

Close the front panel manually. When a disc is already inserted, press SOURCE/POWER to switch to the CD mode.

DIG/ANA MODE:Automatically switches between digital and

analog signal ANALOG ONLYReceives analog signal only

TUNER XM RADIO/SIRIUS*1 DISC IPOD*2

3 Turn off the “ ” indicator by pressing FUNC.

CHANGER * 3 TUNER

*1 Only when XM Radio or Sirius Radio is connected. *2 Only when the iPod is connected. *3 Only when the CD changer is connected. 3 While playing back MP3/WMA, press or to select the desired folder. Pressing and holding or will change folders continuously. 4 Press or to select the desired track (file).

  • Select mode will be canceled when an operation has not been performed in 10 seconds.

Returning to the beginning of the current track (file):

Press .

Fast backward:

Press and hold .

Advancing to the beginning of the next track (file):

Press .

Fast forward:

Press and hold . 5 To pause playback, press / . Pressing / again will resume playback. 6 After pressing (OPEN) to open the front panel, press to eject the disc.

  • Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either.

Rotary encoder · /

Page 12 of the Alpine CDA-9856 user manual — Repeat Play
Page 12 · click to enlarge
Page 12
  • If the CD does not eject, press and hold for at least 2 seconds.
  • The CD-player can play discs containing audio data, MP3 data and WMA data.
  • A WMA format file that is protected by DRM (Digital Rights Management) cannot be played back on this unit.
  • The track display for MP3/WMA data playback is the file numbers recorded on the disc.
  • The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.

M.I.X. (Random Play)

Press 5 in the play or pause mode. The tracks (files) on the disc will be played back in random sequence.

To cancel M.I.X. play, press 5 again.

Internal CD mode :

MP3/WMA Play Display The folder number and file number will be displayed as described below.

: Tracks are played back in random sequence.

F01 T03 10'15

CD Changer mode :

: Tracks are played back in random sequence.

  • Press TITLE to switch the display. Please see “Displaying the Text” (page 15) for information about display switching.
  • If the folder or file number is three digits, “F” or “T” is not displayed.

: The tracks on all the CDs in the current

magazine will be included in the random playback sequence.

Repeat Play

Press 4 to play back repeatedly the track being played. The track (file) will be played repeatedly.

  • If M.I.X. is set to ON during RPT (REPEAT ALL) play in CD changer mode, M.I.X. will apply to the current disc only.

MP3/WMA mode :

Press 4 again and select off to deactivate repeat play.

CD mode :

: Only files in a folder are played back in

random sequence.

: Only a track is repeatedly played back

: Files are played back in random sequence.

: A disc is repeatedly played back

If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc.

*1 When a CD changer is connected

  • If REPEAT is set to ON during M.I.X. (M.I.X. ONE) play in CD changer mode, M.I.X. will apply to the current disc only.
  • If a 6-disc CD changer or an MP3 compatible CD changer is connected: In CD changer mode, press FUNC. to illuminate the “ ” indicator, and go to the step above within 10 seconds.
  • If a 12-disc CD changer is connected: In CD changer mode, press FUNC. twice to illuminate the “ ” indicator, and go to the step above within 10 seconds.

MP3/WMA mode :

: Only a file is repeatedly played back

: Only files in a folder are repeatedly played back

: A disc is repeatedly played back

*2 When an MP3 compatible CD changer is connected

  • If a 6-disc CD changer or an MP3 compatible CD changer is connected: In CD changer mode, press FUNC. to illuminate the “ ” indicator, and go to the step above within 10 seconds.
  • If a 12-disc CD changer is connected: In CD changer mode, press FUNC. twice to illuminate the “ ” indicator, and go to the step above within 10 seconds.

Folder number display · File number display · Elapsed time

Page 13 of the Alpine CDA-9856 user manual — CAUTION
Page 13 · click to enlarge
Page 13
  • Press and hold for at least 2 seconds in the search mode to cancel. Or, the search mode will be canceled when an operation has not been performed in 10 seconds.
  • While in the File Name Search mode, press FUNC . to switch to the previous mode (Folder Search mode or the selecting search mode.)
  • File Name search cannot be made during M.I.X. play.

Searching from CD Text

Tracks can be searched and played using the CD text on the disc. If a disc is not compatible with text, or a disc is in the changer, searches can be made by track number. 1 Press during play. This will set the search mode. 2 Turn the Rotary encoder to select the desired track, then press MODE. This will play the selected track.

Quick Search

You can search for tracks (files). 1 Press and hold for at least 2 seconds in the CD/ Changer/MP3/WMA mode to activate Quick Search mode. 2 Turn the Rotary encoder to select a desired track (file). The selected track is played back immediately.

  • Press and hold for at least 2 seconds in the search mode to cancel. Or, the search mode will be canceled when an operation has not been performed in 10 seconds.
  • CD text search cannot be made during M.I.X. play.

File/Folder Name Search (concerning MP3/WMA)

  • Press and hold for at least 2 seconds in the search mode to cancel. Or, the search mode will be canceled when an operation has not been performed in 10 seconds.

You can display and search for the folder and file name while listening to the file currently being played back. 1 During MP3/WMA playback, press to activate the search mode 2 Turn the Rotary encoder to select Folder Name Search mode or File Name Search mode, then press

About MP3/WMA

CAUTION

Except for private use, duplicating audio data (including MP3/ WMA data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty.

Folder Name Search mode 3 Turn the Rotary encoder to select the desired folder. 4 Press / to play back the first file in the selected folder.

MP3, whose official name is “MPEG-1 Audio Layer 3,” is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG which is a joint activity institution of the IEC.

MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds.

  • Press and hold for at least 2 seconds in the search mode to cancel. Or, the search mode will be canceled when an operation has not been performed in 10 seconds.
  • While in Folder Name Search mode, press to switch to File Name Search mode.
  • While in Folder Name Search mode, press FUNC . to return to the selecting search mode.
  • If a disc contains only the root folder, Folder Name Search cannot be made.
  • “NO FILE” is displayed for 2 seconds if the folder that is selected by the Folder Name Search mode contains no files.
  • “ROOT” is displayed for the root folder which does not have folder name.
  • Folder Name search cannot be made during M.I.X. play.

WMA, or “Windows media™ Audio,” is compressed audio data. WMA is similar to MP3 audio data and can achieve CD quality sound with small file sizes.

Method for creating MP3/WMA files

Audio data is compressed by using MP3/WMA specified software. For details on creating MP3/WMA files, refer to the user's manual for that software. MP3/WMA files that can be played back by this device have the file extension “mp3” / “wma”. Files with no extension cannot be played back. (WMA ver. 7.1, 8 and 9 are supported)

File Name Search mode 3 Press or to select another Folder. 4 Select the desired file by turning the Rotary encoder. 5 Press MODE to play back the selected file.

What is MP3? · What is WMA?

Page 14 of the Alpine CDA-9856 user manual — Terminology
Page 14 · click to enlarge
Page 14

Supported playback sampling rates and bit rates

Alpine CDA-9856 — MP3 / WMA Compatibility diagram (page 14)
Fig. 3 · MP3 / WMA Compatibility

MP3

Sampling rates48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,

16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 8 - 320 kbps

WMA

Sampling rates48 kHz, 44.1 kHz, 32 kHz
Bit rates48 - 192 kbps

This device supports ID3 tag v1 and v2, and WMA tag. If tag data is in an MP3/WMA file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data.

This device can only display single-byte alphanumeric characters (up to 30 for ID3 tags and up to 15 for WMA tags) and the underscore. For non-supported characters, “NO SUPPORT” is displayed. The tag information may not be correctly displayed, depending on the contents.

Terminology

MP3/WMA files are prepared, then written to a CD-R or CD-RW using CD-R writing software. A disc can hold up to 510 files/ folders (including Root Folders). However, the maximum number of folders is 255.

This is the “sound” compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files.

The media that this device can play back are CD-ROMs, CD-Rs, and CD-RWs.

This value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so the sound is sampled (recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data.

This device supports discs formatted with ISO9660 Level 1 or Level 2.

Under the ISO9660 standard, there are some restrictions to remember. The maximum nested folder depth is 8 (including the root directory). The number of folder/file name characters is limited. Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and ‘_’ (underscore).

Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format.

Song information such as track titles, artist names, album names, etc., written into MP3/WMA files. MP3: ID3 tag WMA: WMA tag

This device also can play back discs in Joliet, Romeo, etc., and other standards that conform to ISO9660. However, sometimes the file names, folder names, etc., are not displayed correctly.

This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD (CD-Extra) and Multi-Session. This device cannot correctly play back discs recorded with Track At Once or packet writing.

The root folder is found at the top of the file system. The root folder contains all folders and files.

The unit plays the files in the order that the writing software writes them. Therefore, the playing order may not be the same as the order you input. The playback order of the folders and files is as follows. However, the folder and file playback order differs from the folder no. and file no. indicated on the display.

Show 12 more labels / short text on this page
ID3 tags/WMA tags · Folder MP3/WMA File · Producing MP3/WMA discs · Bit rate · Media supported · Sampling rate · Corresponding File Systems · Encoding · Tag · Formats supported · Root folder · Order of tracks
Page 15 of the Alpine CDA-9856 user manual — Setting the Bass Level
Page 15 · click to enlarge
Page 15

Sound Setting

Setting the Bass Control

You can change the Bass Frequency emphasis to create your own tonal preference. 1 Press MENU to select the BASS ENGINE mode, then press MODE.

SOURCE/POWER

Alpine CDA-9856 — SOURCE/POWER diagram (page 15)
Fig. 4
Alpine CDA-9856 — SOURCE/POWER diagram (page 15)
Fig. 5

BBE BASS ENGINE SETUP RETURN (OFF) BBE 2 Press or to select the BASS (Bass Center Frequency) control mode.

3-1 Press SOURCE/POWER to select the desired bass center frequency.

Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat

80Hz 100Hz 120Hz 60Hz 80Hz

Emphasizes the displayed bass frequency ranges.

1 Press MODE repeatedly to choose the desired mode.

Setting the Bass Bandwidth

3-2 Press BAND to select the desired bass bandwidth.

Each press changes the modes as follows:

BASS TREBLE SUBW* BALANCE FADER DEFEAT VOLUME BASS

Bass level: –7 ~ +10 Treble level: –7 ~ +7 Subwoofer : 0 ~ +15 Balance : L15 ~ R15 Fader : R15 ~ F15 Defeat : ON/OFF Volume : 0 ~ 35

Changes the boosted bass bandwidth to wide or narrow. A wide setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency.

Setting the Bass Level

  • If MODE is not pressed within 5 seconds after selecting the BASS, TREBLE, BALANCE, FADER, DEFEAT or SUBW mode, the unit automatically returns to normal mode.

3-3*1Turn the Rotary encoder to select the desired bass level (–7~+10). You can emphasize or weaken the bass frequency. 4 Press MENU to select RETURN. After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.

* When the subwoofer mode is set to OFF, its level cannot be adjusted. 2 Turn the Rotary encoder until the desired sound is obtained in each mode. By setting Defeat ON, previously adjusted settings of BASS and TREBLE will return to the factory defaults.

  • Depending on the connected devices, some functions and display indications do not work.
  • If no operation is performed within 60 seconds, the bass control setting will be turned off automatically.
  • The bass level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The bass frequency and bass band width settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.).
  • Depending on the connected devices, some functions and display indications do not work. However, Bass Level is still adjustable if an audio processor with the Bass function is connected.
  • This function is inoperable when DEFEAT is set to ON.
  • While in the bass adjusting mode, TREBLE CONTROL adjusting mode can be recalled by pressing or .

*1 The adjustment can also be made by pressing MODE. Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 13).

Page 16 of the Alpine CDA-9856 user manual — Setting the Treble Level
Page 16 · click to enlarge
Page 16

Setting the BBE Mode

Bass level indicator’s display

Bass Level is usually displayed. When BBE is activated, the display changes according to the BBE setting.

BBE makes vocals or instruments sound distinct regardless of the music source. The FM radio, CD, and MP3, will be able to reproduce the music clearly even in cars with a lot of road noise. 1 Press SOURCE/POWER to select the source to which you want to apply BBE. 2 Press MENU to select BBE mode, then press MODE.

BBE BASS ENGINE SETUP RETURN (OFF) BBE 3 Press to set the BBE mode ON.

Setting the Treble Control

BBE OFF* BBE ON (BBE 1 to 3, EFFECT OFF)

You can change the Treble Frequency emphasis to create your own tonal preference. 1 Press MENU to select the BASS ENGINE mode, then press MODE.

4 Turn the Rotary encoder to select your preferred BBE level (1 to 3) or EFFECT OFF. 5 Press MENU to select RETURN. After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.

BBE BASS ENGINE SETUP RETURN (OFF) BBE 2 Press or to select the TREBLE (Treble Center Frequency) control mode.

BASS TREBLE

* To cancel BBE mode for all music sources, press to select BBE OFF in step 3.

Setting the Treble Center Frequency

  • Each music source, such as FM radio, CD (included MP3/WMA) can have its own BBE setting.
  • This function is inoperable when DEFEAT is set to ON.
  • There is no BBE mode for AM radio.
  • When an external audio processor is connected, this setting cannot be made.
  • If no operation is performed in 60 seconds, the unit returns to normal mode.

3-1 Press SOURCE/POWER to select the desired treble center frequency.

10.0kHz 12.5kHz 15.0kHz 7.5kHz 10.0kHz

Emphasizes the displayed treble frequency ranges.

Setting the Treble Level

3-2*2Turn the Rotary encoder to select the desired treble level (–7~+7). You can emphasize the treble frequency. 4 Press MENU to select RETURN. After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.

  • If no operation is performed within 60 seconds, the treble control setting will be turned off automatically.
  • The treble level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.).
  • Depending on the connected devices, some functions and display indications do not work. However, Treble Level is still adjustable if an audio processor with the Treble function is connected.
  • This function is inoperable when DEFEAT is set to ON.
  • While in the treble adjusting mode, BASS CONTROL adjusting mode can be recalled by pressing or .

*2 The adjustment can also be made by pressing MODE. Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 13).

Page 17 of the Alpine CDA-9856 user manual — FRAME * 4 FOLDER NO./FILE NO./ELAPSED TIME
Page 17 · click to enlarge
Page 17
Alpine CDA-9856 — Sound Settings diagram (page 17)
Fig. 6 · Sound Settings

About the indication display

When displaying Text, the following indicators are lit according to the mode.

Alpine CDA-9856 — About the indication display diagram (page 17)
Fig. 7 · About the indication display

TITLE

The position of a song being played back is shown lit in the total number of songs shown. The display example is as shown below. Also lights when operation, such as fast forward, etc., is performed.

Displaying the Text

Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file name, and the tag, etc., while playing MP3/WMA files.

Lights up when a disc is inserted

Song position display example

Press TITLE. The display will change every time the button is pressed.

<First half> <Middle> <Last half>

  • For example, when the 5th of 10 songs in the disc is played back, “ ” is displayed.

The display in Radio mode:

Alpine CDA-9856 — Song position display example diagram (page 17)
Fig. 8 · Song position display example

FREQUENCY CLOCK RADIO STATION NAME * 5/6

ARTIST NAME*5 ALBUM NAME*5 SONG NAME*5

FREQUENCY

The display in CD mode:

TRACK NO./ELAPSED TIME TRACK NO./CLOCK TEXT (DISC NAME)*1 TEXT (TRACK NAME)*1

TRACK NO./ELAPSED TIME

The display in MP3/WMA mode:

FOLDER NO./FILE NO./ELAPSED TIME FOLDER NO./ FILE NO./CLOCK FOLDER NAME*3 FILE NAME ARTIST NAME*2 ALBUM NAME*2 TRACK NAME*2

FRAME * 4 FOLDER NO./FILE NO./ELAPSED TIME

*1 Displayed during playback of a disc with CD Text. If there is no Text (Disc Name or Track Name), “DISC TEXT”/ “TRACK TEXT” is displayed. “D TEXT”/“T TEXT” is displayed for changer. *2 ID3 tag/WMA tag If an MP3/WMA file contains ID3 tag/WMA tag information, the ID3 tag/WMA tag information is displayed (e.g., track name, artist name, and album name). All other tag data is ignored. If the Scroll Setting (page 17) is set to “SCROLL AUTO,” the tag information will scroll automatically. If there is no tag information, “ARTIST’/“ALBUM”/“SONG” is displayed. *3 “ROOT” is displayed for the root folder which doesn’t have folder name. If there is no folder name or file name, “FOLDER”/“FILE” is displayed. *4 The recording sampling rate and bit rate of the MP3/WMA file are displayed. A WMA file of variable bit rate displays the average bit rate. *5 When an HD radio signal is received, text information such as “RADIO STATION”, “ARTIST”, etc., is displayed. If there is no text information, “ARTIST”/“ALBUM”/“SONG”/ “STATION” will be displayed. *6 RADIO STATION NAME can be switched between “LONG” and “SHORT” in “HD Radio Station Call Setting” (page 17).

Page 18 of the Alpine CDA-9856 user manual — Displaying Time
Page 18 · click to enlarge
Page 18

About “Text”

Text:

Text compatible CDs contain text information such as the disc name and track name. Such text information is referred to as “text.”

  • Some characters may not be displayed correctly with this device, depending on the character type.
  • The CD changer must also be CD Text compatible for the Text information to be displayed.
  • When the Scroll Setting (page 17) is set to “SCROLL MANU,” press and hold TITLE for at least 2 seconds to scroll the Text information only once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE NAME DISPLAY or TAG DISPLAY mode).
  • “NO SUPPORT” is displayed when the desired text information cannot be displayed on this unit.
  • The text or tag information may not be correctly displayed, depending on the contents.

Displaying Time

Press TITLE repeatedly until the time is displayed.

Each press changes the display. For details, see “Displaying the Text” (page 15).

  • Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display.
  • When the power is off but the ignition key is on, press TITLE to display the time.
Page 19 of the Alpine CDA-9856 user manual — BASS TREBLE SUBW BALANCE FADER DEFEAT VOLUME BASS
Page 19 · click to enlarge
Page 19

Setting the Subwoofer System

SETUP

SUBW SYS1 (Initial setting) / SUBW SYS2

Select either SYS1 or SYS2 for the desired subwoofer effect.

You can flexibly customize the unit to suit your own preferences and usage. Choose the SETUP menu from Sound Customizing, Visual Customizing, etc., to select your desired setting.

SUBW SYS1Subwoofer level changes according to the main
volume setting. SUBW SYS2Subwoofer level change is different from the main

volume setting. For example, even at low volume settings, the subwoofer is still audible.

SOURCE/POWER

MENU

Visual Customizing

Dimmer Control

DIMMER AUTO (Initial setting) / DIMMER MANU

Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit’s backlighting is too bright at night.

MODE

Scroll Type Setting

SCROLL TYPE1 / SCROLL TYPE2 (Initial setting)

Choose from two scrolling methods. Select the type you prefer.

A typical SETUP procedure is shown in steps 1 to 4 as follows. See below for further information about each SETUP menu.

SCROLL TYPE1The characters scroll sequentially, appearing

from the right side of the display. SCROLL TYPE2: The characters are displayed one by one, and

1 Press MENU to select the SETUP mode, then press MODE.

disappear one by one from the left side of the display after the screen is filled up with the characters.

BBE BASS ENGINE SETUP RETURN (OFF) BBE 2 Press or to select the desired SETUP menu, then press MODE. (e.g. Select SUBWOOFER)

Scroll Setting (TEXT SCROLL)

SCROLL AUTO / SCROLL MANU (Initial setting)

This CD player can scroll the disc and track names recorded on CD- TEXT discs, as well as text information of MP3/WMA files, folder names, tags, HD Radio and SAT Radio.

DIMMER SUBWOOFER (SUBW SYSTEM) * 1

PLAY MODE SCROLL TYPE TEXT SCROLL INT MUTE AUX IN (AUX NAME)*2 DIGITAL AUX POWER IC (CH SELECT)*3 (XM ADF)*3

SCROLL AUTOText information of CD, folder and file names,

HD Radio and SAT Radio are scrolled automatically. Also, tag information is automatically scrolled without pressing TITLE in the tag information display mode. SCROLL MANU: The display is scrolled when a disc is loaded

STATION CALL DEMO DIMMER

*1 Displayed only when SUBW is ON. *2 Displayed only when AUX is ON. *3 When SAT is connected. For the SAT Radio Setting, refer to “SAT Radio Receiver (Optional)” (page 19). 3 Turn the Rotary encoder to change the setting. (e.g. Select SUBW ON or SUBW OFF.) 4 Press MENU to select RETURN. After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.

or when a track is changed, etc.

  • The unit scrolls CD text names, folder names, file names or tag display.

HD Radio Station Call Setting

SHORT (Initial setting) / LONG

In the HD radio mode, the number of display characters for the HD radio station name can be selected.

SHORT7 characters (FM) 4 characters (AM) LONG: 56 characters

Sound Customizing

Subwoofer On and Off

Demonstration

SUBW ON (Initial setting) / SUBW OFF

DEMO ON / DEMO OFF (Initial setting)

When the subwoofer is on, perform the steps below to adjust the subwoofer output level.

This unit has a demonstration feature for the display.

  • To quit Demo mode, set to DEMO OFF.

1 In the normal mode, press MODE repeatedly to select the SUBW mode.

BASS TREBLE SUBW BALANCE FADER DEFEAT VOLUME BASS

2 Adjust the level by turning the Rotary encoder.

BAND Rotary encoder

Page 20 of the Alpine CDA-9856 user manual — Setting the External Digital Input (DIGITAL AUX)
Page 20 · click to enlarge
Page 20

Connecting to an External Amplifier

MP3/WMA

POWER IC ON (Initial setting) / POWER IC OFF

When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier.

Playing MP3/WMA Data (PLAY MODE)

CDDA (Initial setting) / CDDA/MP3

POWER IC OFFUse this mode when the front and rear pre-

This product can playback CDs containing both CD and MP3/WMA data. However, in some situations (some enhanced CDs), playback may be difficult. For these special cases, you can select playback of CD data only. When a disc contains both CD or the MP3/WMA data, playback starts from the CD data portion of the disc.

amplifier of the unit are used to drive an external amplifier connected to the speakers. In this setting, the head unit’s internal amplifier has no output to drive speakers.

CDDA: Only CD data can be played back. CDDA/MP3: Both CD data and MP3/WMA file tracks can be played back.

  • Perform this setting before inserting a disc. If a disc has already been inserted, perform the setting after you remove the disc. (If you use an MP3 changer, you have to change discs.)

External Device

Turning Mute Mode On/Off (INT MUTE)

MUTE ON (Initial setting) / MUTE OFF

POWER IC ONThe speakers are driven by the built-in

If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device.

amplifier.

Speakers

SPEAKER RIGHT FRONT Front right

Setting the AUX Mode (V-Link)

AUX IN ON / AUX IN OFF (Initial setting)

You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to this component. You can change the AUX name display when AUX IN ON is set. Select the AUX name by pressing or . Then press MODE. If the KCA-410C is connected, it is possible to select two AUX names.

SPEAKER RIGHT REAR Rear right

  • Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE/POWER to select AUX mode and then press BAND to select your desired device.

SPEAKER LEFT REAR Rear left

Setting the External Digital Input (DIGITAL AUX)

SPEAKER LEFT FRONT Front left

D-AUX ON / D-AUX OFF (Initial setting)

When an ALPINE Ai-NET compatible digital audio processor and a DVD player (DVE-5207) not compatible with Ai-NET are connected, set D-AUX to ON to enjoy 5.1-channel surround sound.

  • No sound is produced by the system when the power output is set to OFF.
  • After setting D-AUX to ON, make the setting in “Connecting an Optical Digital Compatible Audio Processor and an Ai-NET NonCompatible DVD Player.”
  • Press SOURCE/POWER , and select the D-AUX mode, and adjust the volume, etc.
  • Depending on the connected audio processor, DVD player sound may continue to be output, even though the source is changed to another one. If this occurs, set the DVD player’s power to OFF.
Show 6 more labels / short text on this page
Front left · Amplifier · Front right · Rear left · Amplifier · Rear right
Page 21 of the Alpine CDA-9856 user manual — Setting the Tuning Method
Page 21 · click to enlarge
Page 21
  • When using the optional remote control (RUE-4190, etc.), an SAT Radio Channel can be directly called up with the numeric keypad of the remote control.

SAT Radio Receiver (Optional)

1 While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control.

2 Press ENTER on the remote control within 5 seconds to receive the Channel. If the channel number is 3 digits, the Channel is automatically received after the channel number is input.

SOURCE/ POWER

BAND MENU

Checking the SAT Radio ID Number

A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number.

MODE

TITLE FUNC.

Preset buttons (1 through 6)

This number is an 8 character (for XM Radio) or 12 character (for SIRIUS Radio) alphanumeric number. It is printed on a label found on the SAT Receiver. It can also be displayed on the screen of the CDA-9856 in the following way.

SAT ReceiverXM or SIRIUS Receiver

When an optional XM or SIRIUS Receiver Box is connected via the Ai-NET bus, the following operations may be performed. However, the XM Receiver and SIRIUS Receiver cannot be connected at the same time.

XM: 1 While receiving a SAT Radio band, press or to select channel “0” for XM. The unit alternately displays “CH 00” or “RADIO ID” for 2 seconds, then the ID number for 10 seconds. While displaying “RADIO ID” as shown above, Demonstration (page 17) become nonfunctional. 2 To cancel the ID number display, set the channel to other than “0.”

Receiving Channels with the SAT Radio Receiver (Optional)

About SAT Radio Satellite Radio* is the next generation of audio entertainment, with over 100 digital audio channels. For a small monthly fee, subscribers can hear crystal-clear music, sports, news and talk, coast-to-coast via satellite. For more information, visit XM’s website at www.xmradio.com or SIRIUS’ website at www.sirius.com

SIRIUS: 1 While receving a SAT Radio band, press or to select channel “255” for SIRIUS. 2 Press TITLE until the ID No. appears in the display.

To receive SAT Radio, the separately sold XMDirect™ or SIRIUS Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will be required. For details, consult you nearest Alpine dealer.

CHANNEL No. CATEGORY NAME CHANNEL NAME ID No. ID No. COMP NAME CLOCK CHANNEL No. 3 To cancel the ID number display, set the channel to other than “255”.

* XM and its corresponding logos are trademarks of XM Satellite Radio Inc. * SIRIUS and its corresponding logos are trademarks of SIRIUS Satellite Radio Inc.

  • The SAT Receiver controls on the CDA-9856 are operative only when a SAT Receiver is connected. 1 Press SOURCE/POWER to select SAT Radio mode. 2 Press BAND to select between one of the three SAT Radio Preset Bands.
  • You cannot use “O,” “S,” “I,” or “F” for the ID Number (XM radio Receiver only).
  • You can check the ID number printed on a label on your third party, SAT Radio Receiver package.

Setting the Tuning Method

Each press changes the band:

You can set the tuning method. You can select the received stations in channel No. order or in channel name order (alphabetic order).

XM modeXM1 XM2 XM3 XM1

SIRIUS mode: SR1 SR2 SR3 SR1 3 Press or to select desired category. 4 Press or to select the desired channel. Holding down or will change channels continuously.

To customers using the SIRIUS Tuner Box: For details about functions, refer to the SIRIUS Tuner Box Owner’s Manual. 1 Press MENU to select the SETUP mode, then press MODE. 2 Press or to select “CH SELECT,” then press MODE.

Rotary encoder · /

Page 22 of the Alpine CDA-9856 user manual — Category Search mode:
Page 22 · click to enlarge
Page 22

3 Turn the Rotary encoder to set the tuning method.

4 Turn the Rotary encoder to select the desired Channel No. or Channel Name, then press MODE.

CH NO: Set in order of channel No. ALPHABET: Set in alphabetic order.

  • Search items vary depending on the setting in “Setting the Tuning Method” (page 19).

4 Press MENU to select RETURN. After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.

When “CH NO” is selectedChannel No. Search When “ALPHABET” is selected: Channel Name Search
  • While in Category Search mode, press FUNC . to return to the selecting search mode.
  • The Search mode is canceled if you press and hold for at least 2 seconds, or no operation is performed for 10 seconds in Category Search mode.
  • When the setting is completed, switch the channel DOWN/UP by pressing the or .

Storing Channel Presets

Channel Search mode:

3 Turn the Rotary encoder to select the desired Channel No. or Channel Name, then press MODE.

1 Press BAND to select the desired band you want to store. 2 After tuning in the desired channel, press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the channel. The selected station is stored. 3 Repeat the procedure to store up to 5 other channels onto the same band.

  • Search items vary depending on the setting in “Setting the Tuning Method” (page 19).
When “CH NO” is selectedChannel No. Search When “ALPHABET” is selected: Channel Name Search
  • While in Channel Search mode, press or to select another Category.
  • While in Channel Search mode, press FUNC . to return to the selecting search mode.
  • The Search mode is canceled if you press and hold for at least 2 seconds, or no operation is performed for 10 seconds in Channel Search mode,
  • To use this procedure for other bands, simply select the band desired and repeat the procedure.
  • A total of 18 channels can be stored in the preset memory (6 channels for each band; XM1, XM2 and XM3 or SR1, SR2 and SR3).
  • If you store a channel in a preset memory which already has a station, the current channel will be cleared and replaced with the new one.

Quick Search Function

You can search for all Channels. 1 Press and hold for at least 2 seconds in XM or SIRIUS mode to activate Quick Search mode. 2 Turn the Rotary encoder to select the desired Channel within 10 seconds. The selected Channel is received.

Receiving Stored Channels

1 Press BAND to select the desired band. 2 Press the channel preset button that has your desired satellite channel in memory.

Receiving Weather or Traffic information from SAT Radio

Category/Channel Search Function

You can search for programs by Category or Channel No. 1 Press in the XM or SIRIUS mode. 2 Turn the Rotary encoder to select Category Search mode or Channel Search mode, then press .

1 Press and hold / for at least 2 seconds in the XM or SIRIUS mode. The received weather or traffic channel is stored. 2 Press and hold BAND for at least 2 seconds. The stored Weather or Traffic channel will be recalled. 3 Press and hold BAND for at least 2 seconds. Returns to normal mode.

Category Search mode:

3 Turn the Rotary encoder to select the desired Category, then press .

  • Stored channels can also be recalled by pressing and holding BAND for at least 2 seconds, except when in XM or SIRIUS mode.
  • The channel excluding the Weather or Traffic information can be stored and recalled.
Page 23 of the Alpine CDA-9856 user manual — Setting the Auxiliary Data Field Display
Page 23 · click to enlarge
Page 23

Changing the Display

Text information, such as the channel name, artist name/feature, and song/program title, is available with each XM or Sirius channel. The unit can display this text information as explained below.

In XM or SIRIUS mode, press TITLE. Each time you press this button, the display changes as shown below.

CHANNEL No. CATEGORY NAME CHANNEL NAME ARTIST NAME SONG TITLE COMPOSER NAME*1

AUXILIARY DATA FIELD*2 CLOCK CHANNEL No.

*1 SIRIUS mode only. *2 XM mode only: When ADF is turned OFF, this information is not displayed (see “Setting the Auxiliary Data Field Display” on page 21).

  • When the “Scroll Setting (TEXT SCROLL)” (page 17) is set to “SCROLL AUTO,” the display scrolls continuously. When the Scroll Setting is set to “SCROLL MANUAL,” the display scrolls only once after any function is performed (PRESET, BAND, SEARCH, etc.). Press and hold TITLE for more than 2 seconds to scroll the display manually.
  • “CHANNEL No.” and “CLOCK” displays do not scroll.
  • Depending on the model, the display may differ from the one shown above.

Setting the Auxiliary Data Field Display

The XM Auxiliary Data Field (ADF) display can be switched on or off. There is no ADF function for the SIRIUS receiver. 1 Press MENU to select the SETUP mode, then press MODE. 2 Select “XMADF” by pressing or , then press MODE. 3 Select ON/OFF by turning the Rotary encoder. When setting to ON, Auxiliary Data Field is displayed by pressing TITLE. (Refer to the “Changing the Display” section page 21.) 4 Press MENU to select RETURN. After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.

Page 24 of the Alpine CDA-9856 user manual — To search for an album of the selected artist
Page 24 · click to enlarge
Page 24

iPod™ (Optional)

Searching for a desired Song

An iPod can contain hundreds of songs. By keeping these songs organized in playlists, the CDA-9856 can use these to ease song searches.

SOURCE/POWER

Searching by Playlist

1 Press to activate the search selection mode. 2 Turn the Rotary encoder to select the PLAYLIST search mode, then press .

6 FUNC.

MODE

5 TITLE

PLAYLIST ARTIST ALBUM SONG PLAYLIST 3*1 Turn the Rotary encoder to select the desired Playlist. 4 Press / . The selected Playlist is played back.

An iPod™, iPod™ mini or iPod™ nano can be connected to the CDA-9856 by using the proprietary ALPINE FULL SPEED™ Connection Cable (KCE-422i). When the CDA-9856 is connected by using the cable, the controls on the iPod™ are not functional.

To search for a song in the selected playlist

About iPods™ usable with this unit

1 After selecting the playlist in step 3*1, press to change to the song search mode of the selected playlist.

The unit can be used with third generation and above iPod™ photo, iPod™ minis or iPod™ nano. iPod™ Shuffle cannot be used, however.

2 Turn the Rotary encoder to select a song and press MODE. The selected song is played back.

  • Touch wheel or scroll wheel type iPods without the dock connector cannot be connected to the unit.
  • The unit can be used with the following iPod versions. Correct function of earlier versions cannot be guranteed.
  • While in the search mode, if you press and hold for at least 2 seconds, or no operation is performed for 10 seconds, the search mode is canceled.
  • In the search mode, pressing FUNC. will return to the previous mode.
  • All songs in the iPod are played back by selecting the stored “iPod name” in step 3* 1 .
  • Playlist search cannot be made during M.I.X. play.
  • “NO SONG” will be displayed if there are no songs in the selected playlist in the PLAYLIST search mode.

Third generation iPod: Ver. 2.3 Forth generation iPod: Ver. 3.0.2 iPod photo: Ver. 1.0 iPod mini: Ver. 1.3 iPod nano: Ver. 1.0

  • The unit cannot be used with the software versions earlier than 22nd Feb.2005. For details about “iPod Software Update,” refer to the iPod Instruction Manual.

Searching by artist name

Playback

1 Press to activate the search selection mode. 2 Turn the Rotary encoder to select the ARTIST search mode, then press .

1 Press SOURCE/POWER to switch to the iPod mode. 2 Press or to select the desired song.

PLAYLIST ARTIST ALBUM SONG PLAYLIST 3*2 Turn the Rotary encoder to select the desired Artist. 4 Press / . The selected Artist song is played back.

Return to the beginning of the current song: Press .

Fast backward: Press and hold .

Advance to the beginning of the next song: Press .

To search for an album of the selected artist

Fast forward: Press and hold .

1 After selecting the artist in step 3*2, press to change to the album search mode of the selected artist.

3 To pause playback, press / . Pressing / again will resume playback.

2*1Turn the Rotary encoder to select an album.

3 Press the / to play back all songs of the selected album.

  • If a song is playing on the iPod when it is connected to the CDA-9856, it will continue playing after the connection.

Rotary encoder · /

Page 25 of the Alpine CDA-9856 user manual — Searching by song name
Page 25 · click to enlarge
Page 25

4 Press MODE. The selected song is played back.

To search for a song of the selected album

1 After selecting the album in step 2*1, press to change to the song search mode of the selected album.

  • While in the search mode, if you press and hold for at least 2 seconds, or no operation is performed for 10 seconds, the search mode is canceled.
  • In the search mode, pressing FUNC. will return to the previous mode.
  • Song name search cannot be made during M.I.X. play.

2 Turn the Rotary encoder to select a song and press MODE. The selected song is played back.

  • While in the search mode, if you press and hold for at least 2 seconds, or no operation is performed for 10 seconds, the search mode is canceled.
  • In the search mode, pressing FUNC. will return to the previous mode.
  • If you choose ALL in step 3* 2 , and you press / , all songs in iPod are played back. If you choose ALL, and you press , the ALBUM search mode for all artists is activated.
  • If you choose ALL in step 2* 1 , and you press / , all songs of the selected artist are played back. If you choose ALL, and you press , the SONG search mode for the selected artist is activated.
  • Artist name search cannot be made during M.I.X. play.

Select Playlist/Artist/Album

Playlist/Artist/Album can be easily changed. For example, if you listen to a song from a selected album, the album can be changed. 1 Press or to select the desired Playlist/Artist/ Album.

  • If search selection mode is not activated, only SONG is searched, this operation is not possible.
  • If an album is selected from an artist search, the album can be searched.
  • During shuffle (M.I.X.) playback, this operation is not possible.

Searching by album name

1 Press to activate the search selection mode. 2 Turn the Rotary encoder to select the ALBUM search mode, then press .

Quick Search

PLAYLIST ARTIST ALBUM SONG PLAYLIST 3*3 Turn the Rotary encoder to select the desired Album. 4 Press / . The selected Album is played back.

You can search for songs. 1 Press and hold for at least 2 seconds to activate Quick Search mode. 2 Turn the Rotary encoder to select a desired song. The selected song is played back immediately.

To search for a song of the selected album

  • While in the search mode, if you press and hold for at least 2 seconds, or no operation is performed for 10 seconds, the search mode is canceled.
  • If many songs are in iPod, it takes time to search for songs.

1 After selecting the album in step 3*3, press to change to the song search mode of the selected album.

2 Turn the Rotary encoder to select a song and press MODE. The selected song is played back.

  • While in the search mode, if you press and hold for at least 2 seconds, or no operation is performed for 10 seconds, the search mode is canceled.
  • In the search mode, pressing FUNC. will return to the previous mode.
  • If you choose ALL in step 3* 3 , and you press / , all songs in the iPod will be played back. If you choose ALL, and you press , the SONG search mode for all albums is activated.
  • Album name search cannot be made during M.I.X. play.

Searching by song name

1 Press to activate the search selection mode. 2 Turn the Rotary encoder to select the SONG search mode, then press .

PLAYLIST ARTIST ALBUM SONG PLAYLIST 3 Turn the Rotary encoder to select the desired Song.

Page 26 of the Alpine CDA-9856 user manual — Repeat Play
Page 26 · click to enlarge
Page 26

Random Play Shuffle (M.I.X.)

Displaying the Text

The Shuffle function of the iPod is displayed as M.I.X. on the CDA-9856.

You can display the tag information of a song in the iPod.

Press TITLE. Each press changes the display.

Shuffle Albums: Album shuffle playback plays back all songs in order, then randomly selects the next album. All songs of that album are played back in order, and so on. Any one album is played just once.

TRACK NO./ELAPSED TIME TRACK NO./CLOCK ARTIST NAME* ALBUM NAME* SONG TITLE* TRACK NO./ELAPSED TIME

* TAG information If the Scroll Setting (page 17) is set to “SCROLL AUTO,” the tag information will scroll automatically. “ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag information.

Shuffle Songs: Song shuffle randomly plays back certain selected songs. Any one song plays back just once until all songs have been played back. 1 Press 5 . The songs will be played back in random sequence.

  • When the Scroll Setting (page 17) is set to “SCROLL MANU,” press and hold TITLE for at least 2 seconds to scroll the tag information only once.
  • Only alphanumeric characters (ASCII) can be displayed.
  • If the artist, album or song name, created in iTunes, has too many characters, songs may not be played back when connected to the adapter. Therefore, a maximum of 250 characters is recommended. The maximum number of characters for the head unit is 128 (128 byte).
  • Some characters may not be correctly displayed.
  • “NO SUPPORT” is displayed when text information is not compatible with the CDA-9856.

M.I.X. M.I.X. (off) M.I.X. (Shuffle Albums) (Shuffle Songs)

2 To cancel M.I.X. play, select (off) with the above procedure.

  • For details of the search mode, refer to “Searching for a desired Song” (page 22).
  • If a song is selected in the album search mode before selecting Shuffle (M.I.X.), the songs will not play back randomly even when Shuffle album is selected.

Shuffle Songs: Shuffle ALL plays all songs in the iPod randomly. Any one song does not play back again until all songs have been played back. 1 Press 6. The songs will be played back in random sequence.

M.I.X. (off) M.I.X. (Shuffle ALL)

2 To cancel M.I.X. play, select (off) with the above procedure.

  • If Shuffle ALL is selected, the selected ones which played back in the search mode are canceled.

Repeat Play

Only Repeat One is available for the iPod. Repeat One: A single song is repeatedly played back. 1 Press 4. The file will be played repeatedly.

RPT (off) RPT (Repeat One)

2 To cancel repeat play, select (off) with the above procedure.

  • During repeat playback, no other songs are selectable by pressing or .
Page 27 of the Alpine CDA-9856 user manual — Controlling CD Changer (Optional)
Page 27 · click to enlarge
Page 27

Changer (Optional)

Playing MP3 Files with the CD Changer (Optional)

If you connect a changer compatible with MP3, you can play CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit. 1 Press SOURCE/POWER to switch to the MP3 Changer mode. 2 Press any one of the disc select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. 3 To pause playback, press / . Pressing / again will resume playback.

SOURCE/POWER

BAND

FUNC. Select buttons (1 through 6) /

  • The unit can play discs containing both audio data and MP3 data.
  • For operating MP3 with an MP3 compatible CD Changer, refer to “CD/MP3/WMA” pages 9 to 12.

Controlling CD Changer (Optional)

Multi-Changer Selection (Optional)

An optional 6-disc or 12-disc CD Changer may be connected to this unit if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of this unit, the CD Changer will be controllable from this unit. Using the KCA-400C (Multi-Changer Switching device) or the KCA-410C (Versatile Link Terminal) multiple changers can be controlled by this unit. See “Multi-Changer Selection” on page 25 for selecting the CD Changers.

Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA-410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX). 1 Press SOURCE/POWER on this unit to activate the CD Changer mode. 2 Press BAND to activate the CD Changer Selection mode. The CD Changer Selection mode remains active for several seconds. 3 Press BAND until the desired CD Changer indicator appears on the display.

  • The controls on this unit for CD Changer operation are operative only when a CD Changer is connected.
  • The DVD changer (optional) is controllable from this unit as well as the CD changer. 1 Press SOURCE/POWER to activate the CHANGER mode. The display shows the disc number and track number.
  • The source indicator varies depending on the connected source.
  • Press BAND to switch the Disc mode in the Changer mode. 2 Press the disc select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. The selected disc number appears in the display and CD playback starts.
  • If the selected CD Changer is not connected, the display will show “NO CHGR-No.”
  • To operate the selected changer, see “CD/MP3/WMA” (pages 9 to 12).
  • For further details about the external input (AUX) when using KCA410C, see “Setting the AUX Mode (V-Link)” on page 18.
  • After selecting the desired disc, you can operate in the same way as for the CD player of this unit. For details, please see the CD/MP3/WMA section.
  • If the “ ” indicator is illuminated, the disc select buttons become nonfunctional.

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the procedure is the same as for the 6-disc CD Changer. To select discs numbered from 7 to 12, first press FUNC. to choose the disc select mode (7 to 12). This changes the “D” indicator to “d”. Then press the desired select button. The select buttons 1 to 6 will represent discs 7 to 12 respectively.

Page 28 of the Alpine CDA-9856 user manual — CD
Page 28 · click to enlarge
Page 28
  • CD insertion not possible.
  • A CD is already in the CD player. - Eject the CD and remove it.
  • The CD is being improperly inserted. - Make sure the CD is being inserted following instructions in

Information

In Case of Difficulty

the CD Player Operation section.

Unable to fast forward or backward the CD. • The CD has been damaged. - Eject the CD and discard it; using a damaged CD in your unit

If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

can cause damage to the mechanism.

  • CD playback sound skips due to vibration.
  • Improper mounting of the unit. - Securely re-mount the unit.
  • The disc is very dirty. - Clean the disc.
  • The disc has scratches. - Change the disc.
  • The pick-up lens is dirty. - Do not use a Commercial available lens cleaner disc. Consult

Basic

No function or display. • Vehicle's ignition is off. - If connected following instructions, the unit will not operate

  • with the vehicle's ignition off.
  • Improper power lead (Red) and battery lead (Yellow) connections. - Check power lead and battery lead connections.
  • Blown fuse. - Check the fuse of the unit; replace with the proper value if

your nearest Alpine dealer.

CD playback sound skips without vibration. • The disc is dirty or scratched. - Clean the disc; damaged disc should be replaced.

necessary. • Internal micro-computer malfunctioned due to interference noise etc. - Press the RESET switch with a ballpoint pen or other pointed

Error displays (built-in CD player only) • Mechanical error - Press . After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest Alpine dealer.

article.

Radio

CD-R/CD-RW playback not possible • Close session (finalization) has not been performed. - Perform finalization and attempt playback again.

Unable to receive stations. • No antenna or open connection in cable. - Make sure the antenna is properly connected;

MP3/WMA

replace the antenna or cable if necessary.

MP3 or WMA is not played back. • Writing error occurred. The CD format is not compatible. - Make sure the CD has been written in a supported format.

  • Unable to tune stations in the seek mode.
  • You are in a weak signal area. - Make sure the tuner is in the DX mode.
  • If the area you are in is a primary signal area, the antenna may not be grounded and connected properly. - Check your antenna connections; make sure the antenna is

Refer to “About MP3/WMA” (pages 11-12), then rewrite in the format supported by this device.

Audio

properly grounded at its mounting location. • The antenna may not be the proper length. - Make sure the antenna is fully extended; if broken, replace the

The sound is not output from the speakers. • Unit has no output signal of the internal amplifier. - POWER IC is switched to “ON” (page 18).

antenna with a new one.

  • Broadcast is noisy.
  • The antenna is not the proper length. - Extend the antenna fully; replace it if it is broken.
  • The antenna is poorly grounded. - Make sure the antenna is grounded properly at its mounting

Indication for CD Player

  • Protective circuit is activated due to high temperature. - The indicator will disappear when the temperature returns to

location.

CD

within operation range.

CD Player/Changer not functioning. • Out of operating temperature range +50°C (+120°F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool.

  • No CD is inserted. - Insert a CD.
  • Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc. - Remove the disc by following these steps:

CD playback sound is wavering. • Moisture condensation in the CD Module. - Allow enough time for the condensation to evaporate (about 1

hour).

Press the button again for at least 2 seconds. If the disc still does not eject, consult your Alpine dealer.

Page 29 of the Alpine CDA-9856 user manual — Indication for CD Changer
Page 29 · click to enlarge
Page 29
  • No indicated disc. - Choose another disc.
  • Mechanism error. 1) Press the button and eject the CD. If not ejecting, consult your Alpine dealer. 2) When the error indication remains after ejecting, press the button again. If the error indication still does not turn off after pressing the
Alpine CDA-9856 — Troubleshooting / Messages diagram (page 29)
Fig. 9 · Troubleshooting / Messages

button for a few times, consult your Alpine dealer.

  • When “ERROR” is displayed: If that the disc cannot be ejected by pressing , press the RESET switch (refer to page 7) and press again. If the disc still cannot be ejected, consult your Alpine dealer.
  • The XM or SIRIUS antenna is not connected to the XM or SIRIUS radio module. - Check whether the XM or SIRIUS antenna cable is attached

securely to the XM or SIRIUS radio module.

  • A copy-protected WMA file was played back. - You can only play back non-copy-protected files.
  • Radio is being updated with latest encryption code. - Wait until encryption code is being updated. Channels 0 and 1

should function normally.

  • The disc is not written in a MP3/WMA supported format. - Use a disc written at the MP3/WMA supported format.

Scrolling display only once

Indication for CD Changer

  • XM or SIRIUS signal is too weak at the current location. - Wait until the car reaches a location with a stronger signal.
  • Protective circuit is activated due to high temperature. - The indicator will disappear when the temperature returns to

within operation range.

  • Radio is acquiring audio or program information. - Wait until the radio has received the information.
  • Malfunction in the CD Changer. - Consult your Alpine dealer. Press the magazine eject button

Scrolling display only once

and pull out the magazine. Check the indication. Insert the magazine again. If the magazine cannot be pulled out, consult your Alpine dealer. • Magazine ejection not possible. - Press the magazine eject button. If the magazine does not eject,

  • The channel currently selected has stopped broadcasting. - Select another channel.

consult your Alpine dealer.

  • The user has selected a channel number that does not exist or is not subscribed to. - The unit will revert back to the previously selected channel.
  • There is no artist name/feature, song/program title, or additional information associated with the channel at that time. - No action needed.
  • A disc is left inside the CD Changer. - Press the eject button to activate the eject function. When the

CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer.

  • No magazine is loaded into the CD Changer. - Insert a magazine.
Show 4 more labels / short text on this page
(XM mode) · (SIRIUS mode) · (XM mode) · (SIRIUS mode)
Page 30 of the Alpine CDA-9856 user manual — NOSEPIECE SIZE
Page 30 · click to enlarge
Page 30

Indication for iPod Mode

Specifications

FM TUNER SECTION

Tuning Range 87.7-107.9 MHz Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 65 dB Stereo Separation 35 dB Capture Ratio 2.0 dB

  • The iPod is not connected. - Make sure the iPod is correctly connected (refer to

“Connections”). Make sure the cable is not bent excessively. • The iPod’s battery remains low. - Refer to the iPod’s documentation and charge the battery.

AM TUNER SECTION

Tuning Range 530-1,710 kHz Sensitivity (IEC Standard) 22.5 µV/27 dB

  • There are no songs in the iPod. - Download songs to the iPod and connect to the adapter.

CD PLAYER SECTION

Frequency Response 5 - 20,000 Hz (±1 dB) Wow & Flutter (% WRMS) Below measurable limits Total Harmonic Distortion 0.008% (at 1 kHz) Dynamic Range 95 dB (at 1 kHz) Signal-to-Noise Ratio 105 dB Channel Separation 85 dB (at 1 kHz)

  • Communication error - Turn the ignition key off, and then set to ON again. - Check the display by reconnecting between the iPod and the

adapter, using the iPod cable.

PICKUP

Wave length 795 nm Laser power CLASS I

  • Caused by the iPod Software Version not being compatible with this unit. - Update the iPod Software Version to be compatible with this

GENERAL

  • Power Requirement 14.4 V DC (11-16 V allowable) Power Output 18 W RMS × 4* *Primary amplifier ratings per CEA-2006 Standard
  • Power output: measured at 4 Ohms and 1% THD+N
  • S/N: 80 dBA (reference: 1 W into 4 Ohms) Maximum Pre-Output Voltage 2 V/10 k ohms Bass +20/-14 dB at 100 Hz Treble ±14 dB at 10 kHz Weight 1.6 kg (3 lbs. 8 oz)

unit.

CHASSIS SIZE

Width 178 mm (7") Height 50 mm (2") Depth 162 mm (6-3/8")

NOSEPIECE SIZE

Width 170 mm (6-11/16") Height 46 mm (1-13/16") Depth 24 mm (15/16")

  • Due to continuous product improvement, specifications and design are subject to change without notice.
Page 31 of the Alpine CDA-9856 user manual — Warning
Page 31 · click to enlarge
Page 31

Installation and Connections

Before installing or connecting the unit, please read the following and pages 3 and 5 of this manual thoroughly for proper use.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

Warning

MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL. Failure to do so may result in electric shock or injury due to electrical shorts.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure. Precautions

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

  • Be sure to disconnect the cable from the (–) battery post before installing your CDA-9856. This will reduce any chance of damage to the unit in case of a short-circuit.
  • Be sure to connect the colour coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system.
  • When making connections to the vehicle's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDA-9856 to the fuse box, make sure the fuse for the intended circuit of the CDA-9856 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer.
  • The CDA-9856 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized Alpine dealer for assistance.
  • Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT. Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

SERIAL NUMBERINSTALLATION DATE: INSTALLATION TECHNICIAN: PLACE OF PURCHASE:
Page 32 of the Alpine CDA-9856 user manual — Removal
Page 32 · click to enlarge
Page 32

Installation

When you install this unit in your car, do not remove the detachable front panel. If the detachable front panel is removed during installation, you might press too hard and warp the metal plate that holds it in place.

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle's chassis.

Accessory List

  • Head unit .............................................................................1
  • Power cable.........................................................................1
  • Mounting sleeve ..................................................................1
  • Carrying case ......................................................................1
  • Bracket key..........................................................................2
  • Screw (M5x8).......................................................................4
  • Owner’s Manual.............................................................1 set
  • For the screw marked “* 2 ”, use an appropriate screw for the chosen mounting location.

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-9856. Connect all other leads of the CDA-9856 according to details described in the CONNECTlONS section.

  • The main unit must be mounted within 35 degrees of the horizontal plane, back to front.

3 Slide the CDA-9856 into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the detachable front panel.

Removal

1. Remove the detachable front panel.
2. Insert the bracket keys into the unit, along the guides on either side. The unit can now be removed from the mounting sleeve.
3. Pull the unit out, keeping it unlocked as you do so.

Remove the Detachable Front Panel (refer to page 6). Slide mounting sleeve from main unit (see “Removal” on page 30).

Show 15 more labels / short text on this page
Screw · Hex Nut (M5) · *2 · Bolt Stud · Detachable Front panel · Metal Mounting Strap · *1 · this unit · Chassis Ground Lead · Less than 35° · Mounting Sleeve (Included) · Dashboard · This unit · Bracket keys (Included) · this unit
Page 33 of the Alpine CDA-9856 user manual — <JAPANESE CAR>
Page 33 · click to enlarge
Page 33

<JAPANESE CAR>

Screws (M5 × 8) (Included)

  • Secure the ground lead of the unit to a clean metal spot using a screw (* 3 ) already attached to the vehicle's chassis.
Show 5 more labels / short text on this page
Face Plate · this unit · Ground Lead · *3 · Mounting Bracket
Page 34 of the Alpine CDA-9856 user manual — Connections
Page 34 · click to enlarge
Page 34

Connections

Alpine CDA-9856 — Connections diagram (page 34)
Fig. 10 · Connections

*1 The label is attached on the bottom of the unit.

Page 35 of the Alpine CDA-9856 user manual — Right Front (-) Speaker Output Lead (Gray/Black)
Page 35 · click to enlarge
Page 35

Antenna Receptacle

Left Rear (+) Speaker Output Lead (Green)

Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable.

Left Rear (-) Speaker Output Lead (Green/Black)

Left Front (-) Speaker Output Lead (White/Black)

Left Front (+) Speaker Output Lead (White)

  • This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier, or a signal processor, etc.

Fuse Holder (10A)

Ai-NET Connector Connect this to the output or input connector of another device (CD Changer, Equalizer, HD Radio™ TUNER MODULE, etc.) equipped with Ai-NET.

Remote Turn-On Lead (Blue/White) Connect this lead to the remote turn-on lead of your amplifier or signal processor.

Audio Interrupt In Lead (Pink/Black)

  • Interface adapter for iPod™ (KCA-420i) is not recommended for use with this product.
  • You can input TV/video sound by connecting an optional Ai-NET/ RCA Interface cable (KCA-121B) to this component.

Illumination Lead (Orange) This lead may be connected to the vehicle's instrument cluster illumination lead. This will allow the backlighting of the CDA-9856 to dim whenever the vehicle's lights are turned on.

Ai-NET Cable (Included with CD Changer)

Rear Output RCA Connectors RED is right and WHITE is left.

Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position.

Front Output RCA Connectors RED is right and WHITE is left.

Subwoofer RCA Connectors RED is right and WHITE is left.

Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle's battery.

RCA Extension Cable (sold separately)

System Switch When connecting a processor or divider using Ai-NET, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.

Ground Lead (Black) Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

  • Be sure to turn the power off to the unit before changing the switch position.

Power Supply Connector

Right Front (+) Speaker Output Lead (Gray)

iPod Direct Connector Control iPod signals. Connect this to an iPod, using the (also separately sold) FULL SPEED™ Connection Cable (KCE-422i).

Right Front (-) Speaker Output Lead (Gray/Black)

Right Rear (-) Speaker Output Lead (Violet/Black)

Right Rear (+) Speaker Output Lead (Violet)

FULL SPEED™ Connection Cable (KCE-422i) (sold separately)

  • To prevent noise/interference in the audio system.
  • Locate the unit and route the leads at least 10 cm away from the car harness.
  • Keep the battery power leads as far away from other leads as possible.
  • Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
  • If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.
  • Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
Page 36 of the Alpine CDA-9856 user manual — Wiring
Page 36 · click to enlarge
Page 36
Alpine CDA-9856 — Wiring diagram (page 36)
Fig. 11 · Wiring
Page 37 of the Alpine CDA-9856 user manual — Wiring
Page 37 · click to enlarge
Page 37
Alpine CDA-9856 — Wiring diagram (page 37)
Fig. 12 · Wiring
Page 38 of the Alpine CDA-9856 user manual — Warranty
Page 38 · click to enlarge
Page 38
Alpine CDA-9856 — Warranty diagram (page 38)
Fig. 13 · Warranty
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Alpine CDA-9856

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Alpine CDA-9856

Be the first to ask — other owners or our team will answer.

Original document

Alpine CDA-9856 manual PDF

38 pages·2.1 MB·Car Stereo System·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…