Instruction/ maintenance manual of the product SR-6520PD Fender
Go to page of 14
Owner’ s Manual for SR-6520PD SR-8520PD P/N 049152.
T ABLE OF CONTENTS 1. OVERVIEW 1-1. BLOCK DIAGRAM 1-2. INTRODUCTION 2. FRONT PANEL CONTROLS, JACKS, AND LEDS 2-1. INPUT JACKS 2-1-1. LINE INPUTS 2-1-2. MICROPHONE INPUTS 2-2. CHANNEL CONTROLS 2-2-1. CHANNEL MAIN CONTROL 2-2-2. CHANNEL TONE CONTROLS 2-2-3.
Signal path exclusive of individual channel Signal path typical for each channel MICROPHONE LINE HIGH LO W MAIN MON . EFF ./REV . T O MAIN BUSS T O EFFECTS/ REVERB BUSS T O MONITOR BUSS MONIT OR EFFECTS/REVERB MAIN MAIN MASTER MAIN OUTPUT GEQ INPUT POWER AMP SPEAKER OUTPUT 2 OHM MINIMUM EFFECTS OUTPUT REVERB FT .
1. OVERVIEW. 1-2. INTRODUCTION. The SR series integrated mixer/amplifiers have been designed for easy setup and simple but versatile oper- ation. Requiring only the addition of microphones and speaker.
2-3-3. REVERB RETURN TO MAIN CONTROL. This control determines how much of the signal from the reverb system is added or returned to the main mix. 2-3-4. REVERB RETURN TO MONITOR CONTROL. Determines how much of the signal from the reverb system is added to the monitor mix.
channel is turned all the way down - otherwise a feed- back loop will exist which could cause oscillation and possible damage to speakers. Care must be taken to insure that the amplitude of the return signal is not too great for the preamp channel input.
allows the power amplifier to be used independently from the rest of the SR powered mixer. Possible uses of this feature include dedicating the power amp to the monitor system while employing an auxil.
4. Slowly attenuate the Equalizer control which has the greatest effect on reducing the ringing. This will take some trial and error - the first ringing usually occurs between 1 kHz and 4 kHz. Continue until the ringing has stopped. 5. Again, slowly increase the output level control until the system is on the verge of feeding back.
7. SPECIFICATIONS SR-6520PD / SR-8520PD Part Number: 100V Version: 071-6521-270 / 071-8521-270 1 20V Version: 071-6521-200 / 071-8521-200 2 30V Version: 071-6521-260 / 071-8521-260 2 30V Version: 071-6521-240 / 071-8521-240 U.K. 240V Version: 071-6521-230 / 071-8521-230 AUST.
SR6520PD MAIN OUTPUT MONITOR OUTPUT EFF . OUTPUT REVERB FOOTSWITCH GEQ OUTPUT GEQ INPUT PWR. AMP INPUT SYSTEM P A TCH BA Y PHANTOM POWER OFF ON 12 12 9 9 6 6 3 3 0 0 3 3 6 6 9 9 12 12 -dB -dB +dB +dB 63 125 250 500 1K 2K 4K 8K 16K GRAPHIC EQUALIZER DSP POWERED MIXER AUX.
FENDER MAIN P .A. SPEAKERS FIGURE 1 SPEAKER OUT MONIT OR OUT GRAPHIC EQUALIZER FENDER MODEL M-300 ST AGE MONIT OR AMPLIFIER FENDER MONIT ORS (MODEL 1272A, 1275A, 1282 Mk. II, OR 1285 Mk. II). KEYBOARD MICROPHONES MAX. EFF./REV . 00 +15 HIGH -15 +15 LOW -15 MAX.
FIGURE 2 *Example- The length of speaker wire required is between 25 and 50 feet and the speaker impedance is 8 ohms. The minimum recommended gauge speaker wire is 16 gauge.
FIGURE 5 FENDER SPL 6000 OR SPL 9000 POWER AMPLIFIER SPEAKER OUT MAIN OUT AN ILUSTRA TION USING AN AUXILIARY POWER AMP AND ADDITIONAL SPEAKERS ON THE MAINS FOR MORE POWER, AND THE BUIL T IN SR POWER AMP TO POWER UP T O 4 ST AGE MONIT OR L OUDSPEAKERS.
FIGURE 6 P A T CHING AN EFFECT BETWEEN THE EFFECTS OUT AND THE AUX. IN . EFFECTS EFFECTS OUT AUX. IN FIGURE 7 P A T CHING AN EFFECT BETWEEN THE EFFECTS OUT AND CHANNEL INPUT . CHANNEL INPUT EFFECTS OUT IMPORT ANT : EFFECTS/REVERB TURNED ALL THE WA Y DOWN (OFF).
An important point after buying a device Fender SR-6520PD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fender SR-6520PD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fender SR-6520PD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fender SR-6520PD you will learn all the available features of the product, as well as information on its operation. The information that you get Fender SR-6520PD will certainly help you make a decision on the purchase.
If you already are a holder of Fender SR-6520PD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fender SR-6520PD.
However, one of the most important roles played by the user manual is to help in solving problems with Fender SR-6520PD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fender SR-6520PD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
