Instruction/ maintenance manual of the product MTP 15HD RSA Extron electronic
Go to page of 20
68-1644-01 Rev. A 08 10 MTP Twisted Pair Transmitter and Receiver Modular Boards PowerCage ™ MTP 15HD RSA Series User Guide PowerCage Products.
This symbol is intended to alert the user of important operating and mainte- nance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’ s enclosure that may present a risk of electric shock.
FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference.
Contents Introduction ............................................ 1 About this Guide ............................................. 1 About the PowerCage MTP 15HD RSA T ransmitters and Receivers .............................. 1 Features ..............
Intr oduction • About this Guide • About the PowerCage ™ MTP 15HD RSA T ransmitters and Receivers • Features About this Guide This guide contains information about the following Extron ® Powe.
The transmitter board also featur es EDID emulation, wher eby the correct r efr esh rate and resolution is applied to the incoming computer signal, ensuring a pr oper image output display . T wo DIP switches on the board allows the user to set the refr esh rate to 50 or 60 Hz (default is 60 Hz) using switch #1.
• PowerCage MTP T 15HD RSA transmits high resolution video and mono audio or RS-232 signals 600 feet (185 meters) or more over a single twisted pair cable. о Inputs: Female 15-pin HD connector for video, 5-pole captive screw connector for audio input, 3-pole captive screw connector for RS-232 communication.
Installation and Operation This section describes the installation and operation of the PowerCage MTP T 15HD RSA and MTP R 15HD RSA SEQ, including: • Installing the Boards into the PowerCage Enclosu.
3. Carefully slide the boar d into the slot, aligning the two tabs on the lower fr ont end of the board with the matching ports in the enclosur e. Push the boar d firmly into place.
NOTE: The receiver auto-detects whether the signal on the audio/RS-232 pair of the TP input is audio or RS-232. It then converts the signal content accordingly , and outputs the signals on the appropriate pins of this connector .
Maximum T ransmitter to Receiver Distance — Analog Signals at 60 Hz Video Format With Pre-Peak Of f. Feet (Meters) With Pre-Peak On. Feet (Meters) Max.
PowerCage Fr ont Panel Port, Control, and Indicators The following features ar e on the fr ont panel of the PowerCage enclosure. PowerCage 1600 COMM 1 POWER ALARM 2 3 14 15 16 1 PSU 2 PSU 1 FAN 2 FAN COMM SELECT CONFIG TEMP 3 4 5 6 2 1 Figure 7.
Boar d Setup and Operation On the MTP T 15HD RSA board there ar e two DIP switches (switch #1 is for r efresh rate, switch #2 is for audio/RS-232), and a 16-position rotary encoder for EDID selection.
Changing the MTP T 15HD RSA Board Settings Change any of the four active DIP switches to the settings as shown in the table below . Switch Position Switch #1 Setting Switch #2 Setting Switch #3 Settin.
2. Noting the color that is shifted furthest left , press the select button accor dingly to select that color (see table above). The corresponding LED lights. 3. Viewing the image, slowly rotate the Adjust knob until the selected color converges with the color furthest right.
Refer ence Information This section provides the specifications and part numbers for the PowerCage MTP T 15HD RSA and MTP R 15HD RSA SEQ modular boards. • Specifications • Part Numbers Specifications Video — PowerCage MTP T 15HD RSA, PowerCage MTP R 15HD RSA SEQ Gain .
Sync — PowerCage MTP T 15HD RSA, PowerCage MTP R 15HD RSA SEQ Input/output type ........................... RGBHV , RGBS, RGsB, RsGsBs Standards ....................................... NTSC 3.58, NTSC 4.43, P AL, SECAM Input level (transmitter) ....
General Recommended cable type .............. Extron Enhanced Skew-Fr ee ™ A/V UTP , CA T 5/5e/6 (shielded or unshielded) Power consumption* ..................... 1 o r 2 * ( pos iti ve- neg ati ve) , 1 00 V AC t o 2 40 V AC, 50- 60 Hz; in terna l, hot -sw app abl e * A redundant power supply is optional.
Part Numbers PowerCage MTP 15HD RSA Part Numbers The PowerCage MTP 15HD RSA boards must be installed in a PowerCage 1600 enclosur e. PowerCage Boards Part number PowerCage MTP T 15HD RSA 70-817-01 Pow.
Extron USA - W est Headquarters + 800.633.9876 Inside USA/Canada Only +1.714.491.1500 +1.714.491.1517 F AX Extron USA - East +800.633.9876 Inside USA/Canada Only +1.919.863.1794 +1.919.863.1797 F AX Extron Eur ope +800.3987.6673 Inside Europe Only +31.
An important point after buying a device Extron electronic MTP 15HD RSA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic MTP 15HD RSA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic MTP 15HD RSA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic MTP 15HD RSA you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic MTP 15HD RSA will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic MTP 15HD RSA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic MTP 15HD RSA.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic MTP 15HD RSA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic MTP 15HD RSA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
