Instruction/ maintenance manual of the product EPD200A EverFocus
Go to page of 10
EVERFOCUS Indoor Pendent Dome Camera Operation Instructions Model No. EPD200 Please read this manual first for correct installa tion and operation. This m anual should be retained for future reference. The information in this m anual was curren t when published.
1 6. Cleaning Do not touch the surface of sensor by hand direc tly . Use a soft cloth to remove the dirt from the camera body . Use lens tissue or a cotton swab and ethanol to clea n the sensor and the camera lens. 7. Do not operate the camera beyond th e specified temperatur e, humidity or power sour ce ratings.
2 SPECIF ICA TION Pickup Device 1/3" SONY Super HAD CCD V i deo Format N TSC or P AL Scanning System N TSC: 525 TV lines, 60 fields/sec. P AL: 625 TV lines, 50 fields/sec. Picture Elements 510 x 492 (NTSC); 500 x 582 (P AL) Horizontal Resolution 380 TVL Sensitivity 0.
3 DIMENSION DIAGRAM a. Conduit Size b. 26mm/1.06” 125mm/4.92” 1 10mm/4.33” 90mm/3.54” 80mm/3.15””.
4 HARDW ARE OVER VIEW a. Front panel design (For V ari-Focal Lens Model) b. Front panel design (For Fixed Lens Model) IRIS LEVEL CONTROL BNC Pigt ail Slot for Focusing and Testing Module BLC – Back .
5 INST ALLA TION This section covers simple steps and detail in stallation. Please follow instruction for preventing any unnecessary damage. Simple S teps: 1. Connect to 26mm/1.06” EMT Conduit Pipe and lock it with Hex W r ench 2. Open camera bubble cover 3.
6 2. Open Camera Bubble Cover T urn the camera bubble until you se e the arrow face to here. 3. Connecting to testing monitor EN220 Connect the BNC Pigtail accessory to the front of the module fo r help with focusing or video testing.
7 4. Adjust Camera Position and Lens a. Adjust camera position (T ilt angle up to 90 degr ee): Adjust camera to the pos ition you like. The turning angel is up to 90 degree.
8 The default setting is ON. ¾ FL (Flickerless) When picture flicker fiercely, turn FL on, then th e camera will stabilize the speed of electron ic shutter at 1/100(S)(NTSC) or 1/120(S)(PAL) auto matically, and reduce the flicker immediately. The default setting is OFF.
9 EverFocus Electr onics Corp. Head Office: 12F , No.79 Sec. 1 Shin-T ai W u Road, Hsi-Chih, T aipei, T aiwan TEL: +886-2-26982334 F AX: +886-2-26982380 www .everfocus.com.tw USA L.A. Office: 1801 Highland A ve. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 F AX: +1-626-844-8838 www .
An important point after buying a device EverFocus EPD200A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EverFocus EPD200A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EverFocus EPD200A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EverFocus EPD200A you will learn all the available features of the product, as well as information on its operation. The information that you get EverFocus EPD200A will certainly help you make a decision on the purchase.
If you already are a holder of EverFocus EPD200A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EverFocus EPD200A.
However, one of the most important roles played by the user manual is to help in solving problems with EverFocus EPD200A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EverFocus EPD200A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
