Instruction/ maintenance manual of the product EMW-330T EverFocus
Go to page of 10
Mobile IR W edge Cam era Operation Instructions Model No. EMW330/EM W330T Please read this manual f irst for correct installation and operation. This manual should be retained for future reference. The information in this manual was current when published.
- 1 - T ABLE OF CONTENTS 1. PRODUCT OVER VIEW ......................................................................................................... 2 2. FEA TURES ....................................................................................
- 2 - 1. PRODUCT OVE RVIEW EMW330 has a s treamline w edge type chassis which is suit able fo r t ransit/school bus mounting. EM W 330 f ixed lens mode l is equipped w it h dual-position lens and IR illuminator enabling user to a djust the best viewing angle.
- 3 - 4. SPECIFICA TIONS EMW 330 EMW 330T Pickup Device 1/3'' SONY Sup er HAD CC D Video Format NTSC or PAL Scanning S ystem NTSC: 525 TV lines, 60 f ields/sec; PAL: 625 TV lines , 50 fields/sec. Picture Elements 768x494(NT SC)/752x582( PAL) Horizontal Reso lution 520TVL Sensitivit y 0.
- 4 - 5. INSTAL LATION 1. Loosen 4 screws to separate camera’s base from its c over . 2. Detach light sensor wire from camera body . Light sensor wir e.
- 5 - 3. Detach LED illuminator wire from camera body . 4. Loosen the screw to make Z-axis adjustment 5. Make Z-axis adjustment Loose the screw LED illuminator wire.
- 6 - 6. a) Loosen the 4 screws from f ixe-lens bracket (or vari-focal lens bracket). Remove the fixe-lens bracket (or vari-fo cal lens bracket). b) Adjust the main board bracket right or left 90° , so th at the lens can be positioned to the correct direction.
- 7 - 8. Loosen the 4 screws as shown in figure to detach IR LED panel and light sensor upper bracket from came ra base. 9. Replace light sensor upper bracket by the light sensor f ront bracket.
- 8 - 10. Replace it by the light sensor front bracket and fixe it with the same screws. 1 1. Change position for IR LED panels b y makin g them crossed.
- 9 - EverFocus Electronics Corp. Headquarters Of fice 12F, No.79 Sec. 1 Shin-T ai W u Road, Hsi-Chi, Taipei , Taiwan Tel: +886-2-26 982334 Fax: +886-2-2 6982380 Beijing office Room 609,T echnolog y Trade Build ing.
An important point after buying a device EverFocus EMW-330T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EverFocus EMW-330T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EverFocus EMW-330T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EverFocus EMW-330T you will learn all the available features of the product, as well as information on its operation. The information that you get EverFocus EMW-330T will certainly help you make a decision on the purchase.
If you already are a holder of EverFocus EMW-330T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EverFocus EMW-330T.
However, one of the most important roles played by the user manual is to help in solving problems with EverFocus EMW-330T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EverFocus EMW-330T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
