Instruction/ maintenance manual of the product EFD300 EverFocus
Go to page of 10
EVERFOCUS 1/3” 520TVL Color Flush Dome Camera Operation Instructions Model No. EFD300 Please read this manual first for correct installa tion and operation. This m a nual should be retained for future reference. The information in this m anual was curren t when published.
1 6. Cleaning Do not touch the surface of sensor by hand direc tly . Use a soft cloth to remove the dirt from the camera body . Use lens tissue or a cotton swab and ethanol to clea n the sensor and the camera lens. 7. Do not operate the camera beyond th e specified temperatur e, humidity or power sour ce ratings.
2 SPECIF ICA TIO NS Pickup Device 1/3'' SONY Super HAD CCD Video Format NTSC or PAL Scanning System NTSC: 525 TV lines, 60 fields/sec PAL: 625 TV lines, 50 fields/sec. Picture Elements 768x494(NTSC) ; 752x582(PAL) Horizontal Resolution 520TVL Sensitivity 0.
3 OPTIONAL ACCESSORIES • EN220 - 5.6-inch High Res LCD Field Monitor DIMENSION DIAGRAM 120mm/4.72” 90mm/3.54” 55mm/2.17” 45mm/1.77” 55mm/2.17”.
4 HARDW ARE OVER VIEW 1. Camera Bubble Cover 2. Camera Setting- Please refer detail in camera setting for user manual. 3. BNC and Power Pigtail 1 2 3.
5 INST ALLA TION This section covers simple steps and detail in stallation. Please follow instruction for preventing any unnecessary damage. Simple S teps: 1. Cut a circle on the ceiling and mount the camera 2. Adjust lens, camera position 3. Adjust camera setting on Dip Switch Detail S teps: 1.
6 2. Adjust lens, camera position a. Optional connecting to testing monitor - Y ou can connect to testing monitor with video pin shown as following. b. Zoom and focus (for V ari-focal Lens Model) (1) Loosen the zoom ring knob, and then turn the ri ng towards <W> or <T> as necessary to obtain the desired view range.
7 Y ou can lose the camera fixing screw and tilt the camera to your best angle of view . 3. Camera Setting CAMERA SETTING ¾ BLC (Back Light Compensation) When BLC is turned on, the AGC, FL and IRIS o.
8 ES ON: The cam era continuously adjusts the shut ter speed from 1/60 (NTSC), 1/50 (P AL) second to 1/100,000 second according to the lumi nance conditions of the scen e. ES OFF: The shutter speed is fixe d at 1/60 (NTSC),1/50 (P AL) second. Set ES OFF , when auto iris lens is used or flicker is observed under a very br ight fluorescent lam p.
9 EverFocus Electr onics Corp. Head Office: 12F , No.79 Sec. 1 Shin-T ai W u Road, Hsi-Chih, T aipei, T aiwan TEL: +886-2-26982334 F AX: +886-2-26982380 www .everfocus.com.tw USA L.A. Office: 1801 Highland A ve. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 F AX: +1-626-844-8838 www .
An important point after buying a device EverFocus EFD300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EverFocus EFD300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EverFocus EFD300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EverFocus EFD300 you will learn all the available features of the product, as well as information on its operation. The information that you get EverFocus EFD300 will certainly help you make a decision on the purchase.
If you already are a holder of EverFocus EFD300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EverFocus EFD300.
However, one of the most important roles played by the user manual is to help in solving problems with EverFocus EFD300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EverFocus EFD300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
