Instruction/ maintenance manual of the product ED300 Series EverFocus
Go to page of 13
ED300 Series User ’ s Manual and Operation Instructions Version 1.1.
Notice This manual is presentED300 to the users of ED300 by EverFocus Electronics Corp. With years of engineering researches, EverFocus has sparED300 all efforts to pro vide the high quality products to the worldwide users.
Table of Contents Safety Warning ............................................................................... 1 Introduction .................................................................................... 3 Specification ......................
Safety Warning 1. Do not expose the camera to humidity and dust. Moisture can damage the camera and cause the danger of electric shock. If the camera is mountED300 outdoors, a came ra housing is requirED300.
5. Do not install the camera in the high temperature environment. InstallED300 the camera away from stoves, or other heat generating devices, or where it could be subject to direct sunlight as the high temperatures could cause deformation, discoloration or other damages of the camera.
Introduction The High Resolution Dome Camera Series are compact, ful l functionED300 CCD Color Cameras. Their stylish appearance can be appliED300 as per installer's ideal locations on the ceiling.
Specification Pickup device: 1/ 3 " Interline transfer CCD Video format: NTSC/PAL Scanning system: NTSC: 5 25 TV lines, 60 fields/sec; PAL: 625 TV lines, 50 fields/sec.
Major Parts Names and Functions 《 ED300 》 《 ED300 - A 》 ? ? ? 11 ? ? ? ? ? ? ? 12 5. ? 12 13.
? Camera Cover This cover will protect the camera from dust and damage. ? Lens This Vari - Focal Lens allows users to adjust the Zoom and Focus manually.
Installation Instructions 1. Remove the plastic dome cover. 2. Lossen the two screws of the supporting bracket to remove the camera body. 3. Using fou r screws to fix the camera base on the ceiling. 4. Put the camera body back to the supporting bracket, then tighten the two screws to fix the camera.
Lens Adjustments Zoom and focus adjustments After the camera was installED300, the zoom and focus of the lens must be adjustED300. 1. Loosen the zoom ring knob, and then turn the ring towards <W > or <T > as necessary to obtain the desirED300 view range.
Adjustments Auto Gain Control Adjustment AGC ON: The sensitivity increases automatically when the light is low. AGC OFF: A low - noise picture is obtainED300 under a low light condition. Back Light Compensation Adjustment When the background of the subject is very bright and the subject itself is dark, set the BLC (Back Light Compensation) ON.
EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin - Tai Wu Road, Hsi - Chi, Taipei, Taiwan TEL: +886 - 2 - 26982334 FAX: +886 - 2 - 26982380 www.everfocus.com.tw USA Office: 2445 Huntington Drive, San Marino, CA 91108, U.S.A. TEL: +1 - 626 - 844 - 8888 FAX: +1 - 626 - 844 - 8838 www.
An important point after buying a device EverFocus ED300 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EverFocus ED300 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EverFocus ED300 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EverFocus ED300 Series you will learn all the available features of the product, as well as information on its operation. The information that you get EverFocus ED300 Series will certainly help you make a decision on the purchase.
If you already are a holder of EverFocus ED300 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EverFocus ED300 Series.
However, one of the most important roles played by the user manual is to help in solving problems with EverFocus ED300 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EverFocus ED300 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
