Instruction/ maintenance manual of the product ENUWI-NX2 Encore electronic
Go to page of 24
ENUWI-NX2 IEEE 802.11n draft 2.0 Wireless USB 2.0 Adapter Users Guide.
Federal Communication Commi ssion Interference Statement This equipment has been tested and found to comply with the limits for a Class B dig ital device, pursuant to Part 15 of the FCC Rules. These limits are de signed to pr ovide reasonable protection against harmful interference in a residential installation .
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) stan dard for radio equipment and services; Part 1: Common technical require ments EN 301 489-17 V1.
[Dutch] essentiële eisen en de and ere relevante bepalingen van richtlijn 1999/5 /EG. Malti [Maltese] Hawnhekk, Encore Electronics Inc , jiddikjara li dan ENUWI-NX2 jikkonforma mal- ħ ti ġ ijiet essenzjali u ma prov vedime nti o ħ rajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar [Hungari an] Alulírott, Enco re Ele ctron ics In c nyilat kozom, ho gy a ENP WI-NX2 megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb el õírásainak.
TABLE OF CONTENT Introduction ................................................................................................ 1 Overview of this User’s Guide ............................................................................... 1 Unpacking and Setup .
INTRODUCTION Congratulations on your purchase of EN UWI-NX2 Wireless 802.1 1n USB Adapter. This manual contains detailed instructions regarding the operation of this product. Please keep this manual for future reference. With the ENUWI-NX2 Wireless 802.
UNPACKING AND SETUP This section provides un packing and setup inform ation for the ENUWI-NX2 Wireless 802.11n USB Adapter. Unpacking The box should contain the following items: One ENUWI-NX2 Wireless 802.
IDENTIFYING EXTERNAL COMPONENTS LED When the LED is blinking, the WLAN Adap ter is transmitting or receiving data on the Wireless Ethernet network. Check the installation The LED of the ENUWI-NX2 Wireless 802.11 n USB Adapter is clearly visibl e and the status of the networ k li nk can be seen inst antly: 1.
SOFTWARE INSTALLATION This section describes how to install the driver and utility for the ENUWI-NX2 Wireless 802.11n. Windows Based Utility Installation 1) Insert the Utility and Driver CD-ROM in to your computer’s CD-ROM Drive and then click the Setup Wizard .
3) Click Finish to restart the comput er. 4) Plug the ENUWI-NX2 Wireless 8 02.11n in to an available USB slot on your computer. 5.
WIRELESS UTILITY SETTING The user can configure the wireless settings using the Wireless Adapter Configuration Utility. Double -click the utility icon that appears in the taskbar. The Wireless Adapter Config uration Utility is divided in to six sections: Link Info, Configuration, Site Survey , Profile, WPS and About.
Link Quality : Shows the link quality of the ENUWI-NX2 Wireless 802.11n with the Access Point when operating under Infrastr ucture mode. Signal Strength: Shows the wireless signal stre ngth of the connection between the ENUWI-NX2 Wireless 802.11n with the Access Point.
Authentication and Security: The following options are avail able: Open System , Shared Key, WPA-PSK, WPA2-PSK , WPA EAP-TLS, WPA2 EPA-TLS . Select Open System, Shared Key for WEP data encryption feature.
WP A EAP-TLS If using the WPA/WPA2 EAP-TLS authenti cation method, please sel ect the Encryption type for TKIP or AE S then select the WPA/WPA2 Certificate from drop down list.
Site Survey This screen allo ws the user to scan for available wireless networks ( wireless clients and Access Points). It als o allows the us er t o establish wireless communicati o ns with an available wireless network. Available Network – displays the wireless networks (wireles s clients and access points) that are within range.
Profile Profile – The user can create an d manage the created prof iles for home, work or public areas. By double-click ing on one of the created pr ofile, the setting will adjust to the specific setting such as SSID, channel, and encry ption as saved by that particular profile.
WPS WiFi Protected Setup (WPS) is an optiona l certification prog ram from the Wi-Fi Alliance that is designed to ease the task of setting up an d configuring security on a wireless network. There ar e two methods used in the WPS as below instruction.
4) If the WPS configuration was successful , the follow window will show on. 5) If the WPS configuration was failed , the follow window will show on. 13.
14.
Enter a PIN into my access point Using the WPS configuration with the “Enter a PIN into my acce ss point” method, the configuration steps as below: 1) Selected the “Enter a PIN into my access point”, th e PIN will be show on the button of the wi ndows.
4) If the WPS configuration was successful , the follow window will show on. 5) If the WPS configuration was failed , the follow window will show on. 16.
About This screen displays information about th e Wireless N USB Adapt er, such as the Driver and Utility version. When a new version of the utility becomes available for upgrade, users will be abl e to identify by version numbers.
TECHNICAL SPECIFICATIONS Hardware Interface USB 2.0 Compliant Standards IEEE 802.11n draft v2..0, IEEE 802.11b and IEEE 802.11g Antenna 2X Integrated Printed Antenna LED Indicator Activity Supported OS Windows® 2000, XP, Windows Vista™ Dimensions (LxWxH) 86.
An important point after buying a device Encore electronic ENUWI-NX2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Encore electronic ENUWI-NX2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Encore electronic ENUWI-NX2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Encore electronic ENUWI-NX2 you will learn all the available features of the product, as well as information on its operation. The information that you get Encore electronic ENUWI-NX2 will certainly help you make a decision on the purchase.
If you already are a holder of Encore electronic ENUWI-NX2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Encore electronic ENUWI-NX2.
However, one of the most important roles played by the user manual is to help in solving problems with Encore electronic ENUWI-NX2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Encore electronic ENUWI-NX2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
