Instruction/ maintenance manual of the product ENL832-TX-RENT Encore electronic
Go to page of 11
ENL832-TX-RE & ENL832-TX-RENT ENL832-TX-EN & ENL832-TX-ICNT 10/100Mbps Fast Ethernet LAN Card User's Guide FCC COMPLIANCE STATEMENT This equipment has bee n tested and found to compl y with the lim its of a Class B computing devices, pursuant to Par t 15 of the FCC rules.
Standard & Specification: * Standard: IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX * Transmission Rate: 10Mbps or 100Mbps * Hardware Required: IBM compatible PC with available PCI slot ( PCI 2.
Driver Installation: [For ENL832-TX-RE & ENL832_TX_RENT] 1. For Windows XP , Windows 2000 and Windows Me : a) When Windows boots up, op erating system will detect the LAN card and Found New Hardware Wizard windows will appear.
2. For Windows 98SE : a) When system boots up, operating sy stem will automatically detect the LAN card and Add New Hardwa re Wizard window will appear, and then click Cancel : b) Insert the Driver Inst allation CD into CD-ROM driv e, window below will appear then click Install Driver to install device driver.
c) Wh en window below appears, click OK to restart the Windows. d) When Windows boots up again, Add New Hard ware Wizard window wi ll appear, then click Next to continue the LAN card inst allation.
e ) S e l e c t Search for the best driver for your de vice , then click Next to continue the installation . f ) S e l e c t Specify a location then click Next to continue: 6.
g ) C l i c k Next to cont inue the inst allation: h ) C l i c k Next to load LAN card device dri ver: 7.
i ) I n s e r t t h e W i n d o w s 9 8 / 9 8 s e C D - R OM in the CD-ROM drive then enter the CD location and click OK to load file: j ) C l i c k Finish to complete file loading: k ) C l i c k Yes to restart the system, when system boots up again, you are ready to use the LAN card.
[For ENL832-TX-EN & ENL832_TX_ICNT] 1. For Windows XP, Windows 2000, Windows ME : a) When Windows boots up, operat ing system will detect the LAN card and Found New Hardware Wizard windows will appear.
c) When OS finishes loading device driv er, window below will appear. Click Ok to complete the install ation: 2. For Windows 98SE a) When Windows boots up, oper ating system will detect LAN card and A dd New Hardwa re Wizard window will appear.
b) Insert the Driver Installation CD int o CD-ROM drive, window below will appear then click Install Driver : c) After OS finishes loading device driver, window below will appear t hen click OK to restart the system. d) After the system boots up, Please wa it for a while to fi nish setting up the device.
An important point after buying a device Encore electronic ENL832-TX-RENT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Encore electronic ENL832-TX-RENT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Encore electronic ENL832-TX-RENT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Encore electronic ENL832-TX-RENT you will learn all the available features of the product, as well as information on its operation. The information that you get Encore electronic ENL832-TX-RENT will certainly help you make a decision on the purchase.
If you already are a holder of Encore electronic ENL832-TX-RENT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Encore electronic ENL832-TX-RENT.
However, one of the most important roles played by the user manual is to help in solving problems with Encore electronic ENL832-TX-RENT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Encore electronic ENL832-TX-RENT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
