Instruction/ maintenance manual of the product EM6561 Eminent
Go to page of 19
1 IPCAM CGI SDK 1.7.
2 Content s IPCAM CGI SDK 1.7 ...................................................................................................................... 1 summary ............................................................................................
3 summary The CGI APIs is based on http protocal. Different CGI with dif ferent Permissions ： visitor 、 operator and Administrator . In this article cgi only support get and post method. upgra de_firmware.cgi and up grade_htmls.cgi only support post method ， otherscgi only support get method.
4 snap shot.cgi description T o obtain the snapshot Permission visitor Syntax /snapshot.cgi[?us er=&pwd=&next_url=] Parameters user:username pwd:password next_url:the name of snapshot Note 1 If not use the parameter “ next_url”, the snapshot name is ： device id(Alias)_ Current time.
5 get_st atus.cgi description T o obtain the Device statu s info. Permission everyone Syntax /get_status.cgi return now ： The count of seconds form 1970-1-1 0:0:0 to now alarm_status ： 0:no alarm .
6 upnp_st atus Return description 0 No Action 1 Succeed 2 Device System Error 3 Errors in Network Communication 4 Errors in Chat with UPnP Device 5 Rejected by UPnP Device, Maybe Port Conflict get_camera_p arams.cgi description obtain camera params Permission visitor Syntax /get_camera_pa rams.
7 0 up 1 S top up 2 down 3 S top down 4 left 5 S top left 6 right 7 S top right … Reserved 25 center 26 V ertical patrol 27 S top vertical patrol 28 Horizon patrol 29 S top horizon patrol … Reserved 94 IO output high 95 IO output low camera_control.
8 reboot.cgi description Reboot device Permission Administrator Syntax /reboot.cgi[?next_url=] restore_factory .cgi description Restore factory settings Permission Administrator Syntax /restore_factory .cgi[?ne xt_url=] get_p arams.cgi description T o obtain the device settings info.
9 user1_pri User1 permission … … user8_name User8 name user8_pwd User8 password user8_pri User8 permission dev2_alias The 2nd Device alias dev2_host The 2nd Device host(IP o r Domain name) dev2_po.
10 wifi_key3_bits 0:64 bits 1:128 bits wifi_key4_bits 0:64 bits 1:128 bits wifi_channel Channel (default 5) wifi_mode Mode (default 0) wifi_wpa_p sk wpa_psk pppoe_enable 0:disable 1:enable pppoe_user pppoe user pppoe_pwd pppoe password upnp_enable 0:disable 1:enable ddns_service 0: disable DDNS 1:oray .
11 ftp_dir catalogue ftp_mode 0:post 1:pasv ftp_upload_interval Upload inte rval (Seconds) 0:disable alarm_motion_armed 0:motion disable 1:enable alarm_motion_sensitivity Sens itivity 0:high 1:medium .
12 set_datetime.cgi description Set device data time Permission Administrator Syntax /set_datetime.cg i?tz=&ntp_enable=&ntp_svr =[&now=&next_url=] Parameters now: The count of seconds fo rm 1970-1-1 0:0:0 to now;if use, the device will calibration time depend on it.
13 &dev4_alias=&dev4_host=&dev4_ port=&dev4_user=&dev4_pwd=&dev5_ alias=&dev5_host=&dev5_port=& dev5_user=&de v5_pwd=&dev6_alias=& dev6_host=&dev6_p.
14 encrypt: 0:disable encrypt 1:web 2:wpa tkip 3:wpa aes 4:wpa2 aes 5:w pa2 tkip+aes defkey: 0~3(web encrypt) key1:wep key1 … key4:wep key4 authtype: Authetication type 0:open 1:share keyformat: Key.
15 1:enable set_ddns.cgi description Set device DDNS settings Permission Administrator Syntax /set_ddns.cgi?service=&user =&pwd=&host=&proxy_svr=&proxy_port= [&next_url=] Parameters service : 0:disable DDNS; 1:oray .cn; 2: DynDns.
16 upload_interval: Upload interval (Sec onds) 0:disable (range:0-65535) set_mail.cgi description Set device mail settings Permission Administrator Syntax /set_mail.
17 Syntax /comm_write.cgi?port= &baud=&bytes=&data=[&next_url=] Parameters Port: 0-3 Baud: 9: B1200 1 1: B2400 12: B4800 13: B9600 14: B19200 15: B38400 4097: B57600 4098: B1 15200 Bytes: < 256 Data: use url code Set_forbidden.
18 Schedule_thu_2 Schedule_fri_0 Schedule_fri_1 Schedule_fri_2 Schedule_sat_0 Schedule_sat_1 Schedule_sat_2 get_forbidden.cgi description Access the forb idding for checking audio/video Permission Administrator Syntax /get_forbidden.cgi return See set_forbidden.
19 Ptz_patrol_h_round: 0: In f init e Ptz_patrol_v_round: 0: In f init e Ptz_patrol_r ate: 0-100, 0: the fastest Ptz_patrol_up_r ate: 0-100, 0: the slowest Ptz_patrol down_rate 0-1 00, 0: the slowest Ptz_patrol left_rate: 0-100, 0: the slowest Ptz_patrol right_r ate: 0-100, 0: the slowest get_misc.
An important point after buying a device Eminent EM6561 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eminent EM6561 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eminent EM6561 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eminent EM6561 you will learn all the available features of the product, as well as information on its operation. The information that you get Eminent EM6561 will certainly help you make a decision on the purchase.
If you already are a holder of Eminent EM6561, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eminent EM6561.
However, one of the most important roles played by the user manual is to help in solving problems with Eminent EM6561. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eminent EM6561 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
