Instruction/ maintenance manual of the product 398 Emerson
Go to page of 12
Models 396 and 398 pH/ORP Sensors Instruction Sheet PN 51A-396/rev .F January 201 1 SPECIFICA TIONS pH Range*: AccuGlass: 0-14 pH Wetted Materials: Model 396: polypropylene, 316 stainless steel, glass, EP Model 398: T efzel; titanium; glass; and choice of Kalrez, Viton or EPDM o-rings Interconnecting Cable: 15 ft (4.
STORAGE 1. It is recommended that electrodes be stored in their original shipping containers until needed. 2. Do not store at temperatures below -5°C (23°F). 3. Electrodes should be stored with a protective cap containing KCl solution (PN 9210342). 4.
3 ORP CALIBRA TION 1. After making an electrical connection between the sensor and the instrument, obtain a st andard solu- tion of saturated quinhydrone. This can also be made quite simply by adding a few crystals of quin- hydrone to either pH 4 or pH 7 buffer .
4 FIGURE 1. Sensor Dimensions MILLIMETER INCH.
5 FIGURE 2. Flow Through and Insertion Inst allation For Models 396 and 398 1-1/2 inch Pipe T ee (PN 200201 1) with 1 inch threaded connections. NOTE: The sensor must be mounted at least 10° above the horizon.
6 FIGURE 3. Submersion Inst allations For Models 396 and 398 MILLIMETER INCH.
7 FIGURE 4. Models 396 and 398 St andard Wiring Option used with Models 1054A, 1054B, 2054, and Preamplifiers PN 22698-02 and 22698-03 FIGURE 5. Models 396 and 398 Option -62 for Wiring to Models 1054, 1 181, 2081, 54e, 81, 3081, 4081, 5081-P , Xmt, SCL-P/Q, and 2700 Preamplifier (PN 23054-03).
8 MILLIMETER INCH SENSOR MODELS 54, 54e, 3081, 81, 4081, 5081-P pH/ORP FIGURE 7. Wiring to Junction Box (PN 23555-00) and Remote Preamplifier ..
9 FIGURE 10. Wiring to Model 1055-22-32. FIGURE 8. Wiring to Model Xmt FIGURE 9. Wiring to Models 3081, 4081, and 5081-P.
10 FIGURE 1 1. Wiring to Model 1055-22-32 through a Remote Junction Box FIGURE 12. Wiring to Model 1055-01-10-22-32.
11 FIGURE 13. Prep aring Coax Cable with BNC Connector for Wiring to Models 54, 54e, 81, 2081, 3081, 4081, 5081-P , and Xmt-P FIGURE 14. Prep aring Coax Cable for Wiring to Model 1 181.
For more detailed instructions, see electronic file 51-396to398 on “Instruction Manuals” CD-rom. FIGURE 17. Wiring to Model 2081 FIGURE 18. Wiring to Models 1054A/B and 2054 SENSOR FIGURE 16. Wiring to Model 1 181 FIGURE 15. Wiring to Models 54e and 81 Credit Cards for U.
An important point after buying a device Emerson 398 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson 398 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson 398 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson 398 you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson 398 will certainly help you make a decision on the purchase.
If you already are a holder of Emerson 398, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson 398.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson 398. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson 398 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
