Instruction/ maintenance manual of the product TND4204VX Elmo
Go to page of 12
VANDAL RESISTANT DOME CAMERA INSTRUCTION MANUAL The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
1 IMPOR T ANT SAFETY INSTR UCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Clean only with dry cloth. 6. Do not block any ventilation openings, install in accordance with the manufacturer's instructions.
2 Name and Function of Each par t 1 2 3 4 5 6 No. Name Function The mounting bracket for ceiling installation. The main body of the camera section. For adjusting the image size. For adjusting the focus. Protective cover for the lens. Protective cover for the main body.
3 7 8 9 12 10 11 13 17 17 15 16 16 14 Used when the white balance is in the PUSH mode. For setting the vertical sync. phase. For adjusting the brightness of the image. For locking the tilt after adjusting the image up/down direction. Connect this to output images.
4 Selector switch (Details) 1.SENS UP switch To set the max. value (upper limit value) of the operating gain in the auto gain control circuit, set this switch to ON position. In case the back lighting is too dark and the camera sensitivity is insufficient, set this switch to ON position.
5 How to Install 1. Make holes in the mounting surface. (Fig. 1) The paper pattern for installation is included. 2. Remove the dome cover main body fixing screws from the camera body. (Fig. 2). Use the dedicated wrench (Attached). Be careful not to drop the cover dome.
Camera mounting bracket mount screw (not attached) Front of camera Camera mounting bracket 6 3. Remove the main body fixing screws, and remove the main body from the camera mounting bracket. (Fig. 3). Remove the screws identified by the mark(Figs. 4).
Base pan Lens (Fig.7) Camera mounting bracket BNC cable Power cord Main body 7 5. Connect the power cord and the BNC cable, and then mount the main body on the camera body. (Fig. 6). · When you connect the Power cord and the BNC cable, roll the waterproof tape to prevent water damage as the figures below indicate.
8 Be careful not to drop the tilt lock screw. Manually fasten the tilt lock screw. If fastened with pliers or the like, the tilt lock screw may be broken. 7. Correct the image tilt. (Fig.9) Be sure to hold the cover motor. 8. Mount the cover lens, and mount the dome cover with the dome cover fixing screws.
9 166 ( 6.54 ) 101.6 ( 4.00 ) Appearance All dimensions in mm(inch) When any f ailure is suspected Symptoms Image is not displayed. Color is not correct.
10 Specifications Power source Power consumption Image pick-up device Effective picture element Scanning area Scanning system Scanning frequency Sync.system Resolution S/N ratio Standard illumination .
11 6X1NSV A02 Printed on recycled paper Printed in CHINA ELMO (Europe) G.m.b.H. Neanderstr. 18 40233 Dusseldorf, Germany Tel. 0211-376051-53 Fax. 0211-376630 E-mail:elmoeurope@AOL.com Web:http://www.elmo.de/ ELMO Mfg. Corp. 1478 Old Country Road, Plainview, NY 11803-5034 U.
An important point after buying a device Elmo TND4204VX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Elmo TND4204VX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Elmo TND4204VX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Elmo TND4204VX you will learn all the available features of the product, as well as information on its operation. The information that you get Elmo TND4204VX will certainly help you make a decision on the purchase.
If you already are a holder of Elmo TND4204VX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Elmo TND4204VX.
However, one of the most important roles played by the user manual is to help in solving problems with Elmo TND4204VX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Elmo TND4204VX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
