Instruction/ maintenance manual of the product TEB4404 Elmo
Go to page of 8
TEB4404 INSTRUCTION MANUAL The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
- 1 - IMPORT ANT SAFEGUARDS 1. Read Instructions All the Safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions The safety instructions and instruction manual should be retained for future reference. 3.
- 2 - P ART NAMES AND FUNCTIONS 1 60 (2.4) 60 (2.4) 3 2 4 90 (3.5) Lens mount Mount a CS-mount lens. Camera mount For mounting a camera on wall, housing, etc. (1/4"-20UNC thread) Focusing dial For fine-adjustment of the lens back-focus. IRIS terminal Connect when an automatic iris lens is used.
- 3 - HOW T O USE 1. Adjust the iris and focus of the lens so that optimum image may be obtained. * Usable lenses CS-mount lenses, whose length "L" (in the illustration) from the bearing surface of the mount is 4mm or less if protruded, should be used.
- 4 - CAMERA CONTROLS AGC switch In case of necessity, set the AGC switch to OFF position. GAMMA selector ( ) Gamma can be selected. ON : 1 OFF : 0.45 INT/LL switch • INT. (internal) control switch When the internal synchronization is used, set the switch to the INT side.
- 5 - turned on. This is necessary to stabilize the camera against the power noise. BLC (Black Light Control) switch With the AGC switch at ON position, BLC are available. By combining the BLC switches 1 and 2, the following can be adjusted: IRIS switch When a DC driven type auto iris lens is used, set this switch to DC position.
- 6 - SPECIFICA TION Note: Weight and dimensions are approximate. Design and specifications are subject to change without prior notice. Model TEB4404 Power source DC12V (DC11V-35V) AC24V (AC15V-27V) 60Hz 0.
- 7 - PRECAUTIONS FOR USE AND INST ALLA TION * Never aim the camera at the sun. Never aim or point the camera at the sun even if you are not shooting. * Do not shoot intense light. Strong light such as a spot light on the image plane will cause blooming or smear.
An important point after buying a device Elmo TEB4404 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Elmo TEB4404 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Elmo TEB4404 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Elmo TEB4404 you will learn all the available features of the product, as well as information on its operation. The information that you get Elmo TEB4404 will certainly help you make a decision on the purchase.
If you already are a holder of Elmo TEB4404, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Elmo TEB4404.
However, one of the most important roles played by the user manual is to help in solving problems with Elmo TEB4404. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Elmo TEB4404 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
