Instruction/ maintenance manual of the product DMX-512 Elation Professional
Go to page of 16
FLOW CHART ................................................................................................1 CONTROLS & FUNCTIONS.......................................................................2 REAR CONTROLS ...............................
Elation Professional® www .elationlighting.com - DMX Programmer Page 1 1 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 • Reversible DMX Polarity Output • 64 DMX Channels • 8 Scanners buttons (u.
1. FIXTURE BUTTONS - Used to Select any or all of 8 fixtures. 2. SPEED/F ADE TIME F ADER- Used to adjust the F ADE TIME. Fade Time is the amount of time it takes the DMX Programmer to completely change from one scene to another . Used also to adjust the rate of the program speed in Auto Mode.
Notice: Be sure to follow figures two and thr ee when making your own cables. Do not use the ground lug on the XLR connector . Do not connect the cable’ s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’ s outer casing.
Conductor 5-Pin XLR Male (In) 3-Pin XLR Female (Out) Pin 1 Pin 5 - Do Not Use Pin 4 - Do Not Use Pin 3 Pin 2 Pin 1 Pin 3 Pin 2 Not Used Not Used Data T rue (+ signal) Data Compliment (- signal) Ground.
1. PRESS AND HOLD the RECORD BUTTON for three (3) seconds to activate recor d mode. A red LED above the button will be lit and the LCD WINDOW will indicate your in record mode by dis- playing “1: REC”. Press the RECORD BUTTON again, the LCD Display will show “REC.
Elation Professional® www .elationlighting.com - DMX Programmer Page 12 Elation Professional® www .elationlighting.com - DMX Programmer Page 11 SCENE COPY : This function allows you to copy the settings of one scene to another . 1. PRESS AND HOLD the RECORD BUTTON for three (3) seconds to activate recor d mode.
Elation Professional® www .elationlighting.com - DMX Programmer Page 14 Elation Professional® www .elationlighting.com - DMX Programmer Page 13 RECORD A PROGRAM ON THE FL Y : 1. PRESS AND HOLD the RECORD BUTTON for three (3) seconds to activate recor d mode.
Elation Professional® www .elationlighting.com - DMX Programmer Page 16 Elation Professional® www .elationlighting.com - DMX Programmer Page 15 RESET ALL MEMOR Y : This function will erase all scenes and program programs. The unit must be off, to perform this function.
Elation Professional® www .elationlighting.com - DMX Programmer Page 18 Elation Professional® www .elationlighting.com - DMX Programmer Page 17 There are 7 data folders in the CF Card Menu. All “ALL”, Scenes “SCEN, Program 1 “Pro1”, Program 2 “Pro2”, Program 3 “Pro3, Program 4 “Pro4”, and Set “SEt”.
Elation Professional® www .elationlighting.com - DMX Programmer Page 20 Elation Professional® www .elationlighting.com - DMX Programmer Page 19 DOWNLOAD SOFTWARE BY RS-232 T o connect to a PC, you will need a serial lap link cable. NOTE: A stan- dard RS-232 cable will not work.
the RECORD BUTTON, press the UP BUTTON until the LED WINDOW shows “3:d.Pr”. 4. Press the RECORD BUTTON to access data download, the LED WINDOW will now show “ALL”, one of the seven (7) data folders in the DMX Programmer . 5. Select the desired data file you wish to download from your DMX Programmer .
Elation Professional® www .elationlighting.com - DMX Programmer Page 24 Elation Professional® www .elationlighting.com - DMX Programmer Page 23 WHEN ST ARTING ADDRESS IS THE ONE SELECTED 1 2 3 5 4 7.
Elation Professional® www .elationlighting.com - DMX Programmer Page 25 TWO YEAR LIMITED WARRANTY A. Elation ® hereby warrants , to the original pur programr , Elation ® products to be free of manuf actur ing defects in material and wor kmanship for a per iod of 2 Y ears (730 days) from the date of purprogram.
D M X P r og ra mm er ™ N ot es D M X P r og ra mm er ™ N ot es Elation Professional® www .elationlighting.com - DMX Programmer Page 28 Elation Professional® www .
Specifications POWER SUPPL Y : DC 9-15V , 500mA min. DMX CHANNELS: 64 DMX Channels INPUT/OUTPUTS: DMX Out 3-Pin Neutrik Chassis Connector RS-232 Port DB 9 Connector Fog Machine Connector 5-Pin Din Connector USB Connector for DJ W ork Light AUDIO TRIGGER: Built-In Microphone DIMENSIONS: 360mm(L) x 193mm(W) x 74mm(H) 14.
An important point after buying a device Elation Professional DMX-512 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Elation Professional DMX-512 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Elation Professional DMX-512 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Elation Professional DMX-512 you will learn all the available features of the product, as well as information on its operation. The information that you get Elation Professional DMX-512 will certainly help you make a decision on the purchase.
If you already are a holder of Elation Professional DMX-512, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Elation Professional DMX-512.
However, one of the most important roles played by the user manual is to help in solving problems with Elation Professional DMX-512. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Elation Professional DMX-512 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
