Instruction/ maintenance manual of the product BR-6228nS Edimax
Go to page of 147
.
COPYRIGHT English Copyright © by Edim ax T echnology Co, LT D .
CA T AL O G Chapter I: Pr oduct Information ......................................................................................................................... 5 1 ‐ 1 Intr oduction and safety inf ormation .....
3 ‐ 2 W ir eless....................................................................................................................... ....................... 72 3 ‐ 2 ‐ 1 Basic Set tings ................................
Chapter I: Product Inf ormation 1 ‐ 1 Intr oduction and safety inf o rmation Thank yo u fo r purchasing BR ‐ 6228nS_nC wir eless.
• Allow you to monitor the router ’s st atus like: DHCP Client Log, System Log, Security Log and Device/Connection S tatus • Easy to use Web-based GUI for network configuration and management pu.
1 ‐ 2 Saf ety Inf ormation In order to k eep the saf ety of us er s and yo ur propertie s, ple ase follow the f o llowing safety instructions: 1.
1 ‐ 3 Syste m Re qu i rem e nts z Internet connection, provided by xDSL or cable modem with a RJ-45 Ethernet port. z Computer or network devices with wir ed or wireless network interface card. z Web browser ( Microsof t Internet Explor er 4.
1 ‐ 4 Pa c ka g e Cont ent s Bef ore yo u star t in g to use this rou t er , please check if there’ s anything missing in th.
1 ‐ 5 Fa m i li a r with yo ur new wireless br oad band ro u te r Fro nt P anel LED Name Light St atus Description PWR.
Back Pan e l BR ‐ 6228nS BR ‐ 6228nS_nC Item Name Description Ant enna Wi r e l e s s ant en.
Bott om Item Name Description Wall mount hole Mount BR-6228nS_nC on the wall..
Chapter II: Syste m and Network Se tup 2 ‐ 1 Est ablish network con nec tion Please fol l o w the following ins truction to bui ld.
3. Connect the power ad ap ter to the wa ll sock et, and then connect it to the ‘5VDC ’ sock et of the ro u te r . 4. Please check all LEDs on the fron t pan el .
2 ‐ 2 Setup client comput ers to obtain IP a ddre ss automatically Af t e r the network connection is es t ablished, the next .
2 ‐ 2 ‐ 1 Wi n d o w s 95/ 98/Me IP addre ss setup: 1. Click ‘Start ’ button (it should be located at lower ‐ left corner of yo u r com puter), then click contro l pan el .
2. Select ‘Obta in an IP addr ess fr om a DHCP ser ver ’ , then click ‘O K’ . .
2 ‐ 2 ‐ 2 Wi n d o w s 2000 IP address se tup: 1. Click ‘Start ’ button (it should be located at lower ‐ left corne r of yo u r co mpu ter), then click contro l pan el .
2. Select ‘Obta in an IP addr ess automa tically ’ and ‘O btain DNS server addre ss automatically ’ , then click ‘OK’ .
2 ‐ 2 ‐ 3 Wi n d o w s XP IP addre ss setup: 1. Click ‘Start ’ button (it should be located at lower ‐ left corne r of yo u r co mpu ter), then click contro l pan el .
2. Select ‘Obta in an IP addr ess automa tically ’ and ‘O btain DNS server addre ss automatically ’ , then click ‘OK’ .
2 ‐ 2 ‐ 4 Wi n d o w s Vi s t a IP address setup: 1. Click ‘Start ’ button (it should be located at lower ‐ left corne r of yo u r co mpu ter), then click contro l pan el .
2. Select ‘Obta in an IP addr ess automa tically ’ and ‘O btain DNS server addre ss automatically ’ , then click ‘OK’ .
2 ‐ 3 Connect to broa dband ro u ter by web br owser Def ault IP addre ss of this broa dband ro u te r is ‘192.
Please input ‘ad m i n ’ in ‘User name’ field, and ‘1234’ in ‘P asswor d’ field, and click ‘O K’ butt on to ent er web configu r ation interface.
Int ernet Connection: IP Address Mode Displays current mode of how this broadband router obtains IP address. IP Address Displays the IP address of WAN connection. Subnet Mask Displays the subne t mask of WAN connection. Default Gateway Displays IP addr ess of the default gateway of WAN connection.
The SSID , up time, IP addr ess of LA N con nect ion, and runti me code number will alway s display on the top of webpa .
Please click ‘sta r t ’ ‐ > ‘run’ at the bottom ‐ lo wer corner of yo ur desktop: Input ‘c m d ’ , then click .
Input ‘i p c o n f i g’ , then pre ss ‘Ent er ’ ke y . Ple ase check the IP addres s fo l l o w ed by ‘Default Gat ewa y ’ (In this exa m pl e , the IP ad dres s of rou te r is 192.
2 ‐ 4 Using ‘Quick Setup’ This broa d band ro u te r pr ovides a ‘Qu ic k Setup’ menu, and yo u ca n setup basic pa ra m et ers of this broadband rou te r .
NTP server here. If you don’t know the host name or IP address of time server, please ask network administrator or use ‘pool.ntp.org’ as time server. Daylight Savings If the country / region of your residence use daylight saving time, please check ‘Enable Function’ box, and select the beginning and ending date of daylight time saving.
If you want to go back to previous ste p, plea se pre ss ‘Back’ button on the bott om of this page . NOTE: T o setup WISP (W ireless ISP) conn ection, please use General Setup -> W AN setup menu.
2 ‐ 4 ‐ 1 Using ‘Dynamic IP ’ as broa d band connection type If you r Int ernet service provider wi ll assign IP addres s .
2 ‐ 4 ‐ 2 Using ‘Static IP’ as br oadband conn ection type If you r ISP req u ires you to set a fix ed IP addre ss .
If you wish to select another connection type as broa dband connection typ e, click ‘Back’; or yo u ca n click ‘OK ’ to finish with quick setup.
2 ‐ 4 ‐ 3 Using ‘PPP oE’ as broa d band conn ect ion type If you r ISP req u ires you to esta bl i sh Int ernet connection b.
Idle Time Out Please specify the time to shutdown internet connect after no internet activity is detected in minute(s). This option is only available when connection type is ‘Connect on Demand’.
2 ‐ 4 ‐ 4 Using ‘PPTP ’ as broadband connection type If you r ISP req u ires you to use PPTP (P oint ‐ to ‐ Po i n t T u.
Here ar e descriptions of every setup items: Item Name Description User ID Please input user ID (user name) assigned by your Internet service provider here. Password Please input the password assigned by your Internet service provider here.
If you wish to select another connection type as broa dband connection typ e, click ‘Back’; or yo u ca n click ‘OK ’ to finish with quick setup.
2 ‐ 4 ‐ 5 Using 'L2TP' as broadband connection type If you r ISP req u ires you to use L2TP (La yer ‐ 2 Tu n n e l i.
Here ar e descriptions of every setup items: Item Name Description User ID Please input user ID (user name) assigned by your Internet service provider here. Password Please input the password assigned by your Internet service provider here.
If you wish to select another connection type as broa dband connection typ e, click ‘Back’; or yo u ca n click ‘OK ’ to finish with quick setup.
Chapter III: General Setup This broa d band ro u te r pr ovides a ‘Qu ic k Setup’ menu, and yo u ca n setup basic pa ra m et ers of this broadband rou te r .
Fi r e w a l l – Fi r e w a l l settings (Please go to chapter 3 ‐ 7) Pa re n ta l Contr ol – Pare nta l control, controls children .
3 ‐ 1 System Yo u can setup basic system settings of this br oadband ro u te r in ‘Sys tem’ menu: Please select the setting it em you wish to set, then click ‘ Apply ’ butt on to procee d.
3 ‐ 1 ‐ 1 Ti m e Zo ne Yo u can change the time zo ne settin gs of this br oadband ro u te r .
3 ‐ 1 ‐ 2 P asswor d Set tings Yo u can change the web login pas sword of this br oadband rou te r .
3 ‐ 1 ‐ 3 Rem ote Management If you need to manage this br oadband rou te r outside of yo u r LAN (i.
Please click ‘A p p l y ’ to save change s you made and resta rt the br oadband ro u te r , this req u ires about 30 seconds and the broa d band rou te r will sto p res p on di n g (this is normal and is not malfunctio n).
3 ‐ 2 WA N Yo u can setup WA N (W ide Area Network, i.e. Int ernet) connections of this br oadband ro u te r in ‘W AN’ .
3 ‐ 2 ‐ 1 Dynamic IP Dynamic IP means your ISP will assign an IP addr ess to yo u automatically by ‘DHCP ’ (Dynamic Hos t Configura tion Prot ocol). Dynamic IP is often used by cab le modem Int erne t connection.
If you wish to select another connection type as broa dband connection typ e, click ‘Back’; or yo u ca n click ‘OK ’ to finish with quick setup.
3 ‐ 2 ‐ 2 Sta tic IP Some ISP will give you a fix e d IP addr ess, and ask yo u to use this IP addre ss to esta bl i sh Int ernet connection.
If you wish to select another connection type as broa dband connection typ e, click ‘Back’; or yo u ca n click ‘OK ’ to finish with quick setup.
3 ‐ 2 ‐ 3 PPP oE If you r ISP req u ires you to esta bl i sh Int ernet connection by PPP oE (P oin t ‐ to ‐ Po i nt Protoc ol over Ethe r net ), yo u ca n use this connection type to estab li sh Interne t conn ect ion.
Idle Time Out Please specify the time to shutdown internet connect after no internet activity is detected in minute(s). This option is only available when connection type is ‘Connect on Demand’.
3 ‐ 2 ‐ 4 PPTP If you r ISP req u ires you to use PPTP (P oint ‐ to ‐ Po i n t T unne ling Prot ocol) to est a blish connection, yo u can select this connection type to estab li sh Interne t conn ect ion.
Here ar e descriptions of every setup items: Item Name Description User ID Please input user ID (user name) assigned by your Internet service provider here. Password Please input the password assigned by your Internet service provider here.
If you wish to select another connection type as broa dband connection typ e, click ‘Back’; or yo u ca n click ‘OK ’ to finish with quick setup.
3 ‐ 2 ‐ 5 L2TP If you r ISP req u ires you to use L2TP (La yer ‐ 2 Tu n n e l i n g Protocol) to esta bl is h connect ion, yo u can select this conne ction type to estab li sh Int ernet connection.
Here ar e descriptions of every setup items: Item Name Description User ID Please input user ID (user name) assigned by your Int ernet service provider here.
If you wish to select another connection type as broa dband connection typ e, click ‘Back’; or yo u ca n click ‘OK ’ to finish with quick setup.
3 ‐ 2 ‐ 6 WISP WISP (W irele ss ISP) is a connection method which estab li sh es Int ernet connection by wirele ss netw ork.
Security According to the secu rity settings of the wireless access point you with to connect, you’ll be prompted to input WEP key / WPA passphrase so you can pass the security check of access point. A correct WEP key / WPA passphrase is required to connect to wi reless access point with security setting.
3 ‐ 3 LA N (W ire d) Yo u can setup Wi r e d LA N (Local Area Network) connections of this broadband ro u te r in ‘L AN’ menu.
Suggestions on IP address numbering plan: If y ou have no idea on how to define an IP address plan for your network, here are some suggestions. 1. A valid IP address has 4 fi elds: a.b.c.d, for most of home and comp an y users, it’ s suggested to use 192.
3 ‐ 3 ‐ 2 LA N IP Yo u can use this setting to assign an IP add ress to the LA N interface of this broa dband ro ut er .
3 ‐ 3 ‐ 3 DHCP Server Yo u can use this setting to decide the ra n ge of IP addr ess leases.
3 ‐ 3 ‐ 4 Sta tic DHCP Leases If you wish to assign a fix ed IP addre ss to certain comp uters / devices by DHCP , .
All MAC ‐ to ‐ IP add ress entrie s will be list ed in this page , and this br oadband ro u te r supports up 16 stat i c DHC.
3 ‐ 2 Wi r e l e s s Yo u can setup Wi r e l e s s LAN conn ect ion param ete rs of this br oadband ro ute r in ‘W irel es s’ menu: Please select one setting in this menu, then click ‘A p p l y ’ to procee d.
3 ‐ 2 ‐ 1 Basic Settings Yo u can set basic settings of wirele ss LA N her e. Please select the worki ng mode of this broadband ro ute r from ‘Mode’ dropdown list fir st: a.
3 ‐ 2 ‐ 1 ‐ 1 AP mode In AP mode, the f ollowing settings will appear: Here ar e descriptions of every setup i.
type an y alphanumerical char acters here, ma ximum 32 charact ers. ESSID is use d to identify your own broad band router from others when there are other broadband routers in the same area.
When yo u finished with the settings in this page, you can click ‘A p p l y ’ butt on to save change s you made in this pag e, or yo u can click ‘Cancel’ to discard chang es.
3 ‐ 2 ‐ 1 ‐ 2 Sta tion ‐ Infr astructur e In Sta tion ‐ Infr astru cture mode, yo u can select a wireless acce ss point to become .
clients. It ’ s recommends to select this band to ma ximize compati bi li ty . ESSID This is the name of broad band router . Yo u can type an y alphanumerical char acters here, ma ximum 32 charact ers.
When yo u finished with the settings in this page, you can click ‘A p p l y ’ butt on to save change s you made in this pag e, or yo u can click ‘Cancel’ to discard chang es.
3 ‐ 2 ‐ 1 ‐ 3 AP Bridge ‐ Po i nt to Po i nt In this mode, yo u ca n use this broa d band ro u te r as a wireless networ.
2.4 GHz (G): 2.4GHz band, only allows 802.11g wirele ss network client to connect this router (ma ximum tr ansfe r ra te 11Mbps). 2.4 GHz (B+G+N): 2.4GHz Band, Allows 802.
3 ‐ 2 ‐ 1 ‐ 4 AP Bridge ‐ Po i nt to Multi ‐ Po i nt In this mode, yo u ca n use this broa d band ro u te r as a wireless .
802.11b and 802.11g wirele ss network client to connect this router (ma ximum tr ansfer ra te 11Mbps fo r 802.11b clients, and ma ximum 54Mbps fo r 802.11g clients).
3 ‐ 2 ‐ 1 ‐ 5 AP Bridge ‐ WDS In this mode, this broadband ro ute r acts as both wireless communication bridge and wirele ss acce ss point.
54Mbps fo r 802.11g clients). 2.4 GHz (G): 2.4GHz band, only allows 802.11g wirele ss network client to connect this router (ma ximum tr ansfe r ra te 11Mbps).
When yo u finished with the settings in this page, you can click ‘A p p l y ’ butt on to save change s you made in this pag e, or yo u can click ‘Cancel’ to discard chang es.
3 ‐ 2 ‐ 1 ‐ 6 Univer sal Rep eat er In this mode, this broadband ro ute r acts as a wireless rep eate r . It will re p eat the signal of the wireless acce ss point you specified, to exte n d its wirele ss coverage.
(ma ximum tr ansfe r ra te 11Mbps). 2.4 GHz (B+G+N): 2.4GHz Band, Allows 802.11b, 80 2.11g, and 802.11N wirele ss clients. It ’ s recommends to select this band to ma ximize compati bi li ty .
When yo u finished with the settings in this page, you can click ‘A p p l y ’ butt on to save change s you made in this pag e, or yo u can click ‘Cancel’ to discard chang es.
3 ‐ 2 ‐ 2 Set Security In certain AP workin g modes, yo u can enable encryption to impro ve security lev el.
WEP Select WEP to enable WEP (W ire d Equ iva le nt Privacy) encryption: Here ar e descriptions of every setup items: .
server to perform 802.1x authentication. Server IP address Input Radius authentication server ’ s IP address here. RADIUS Server Po r t Input Radius authentication ser ver ’ s service port here.
WP A pre ‐ share d ke y WP A (W i ‐ Fi Prot ect ed A ccess) is also an encryption method and is saf er than WEP .
WP A RADIUS If you have RADIUS authentica tion server on yo ur local network, yo u can authenticat e the wirele ss clien ts by RADIUS server ’ s user database.
Please click ‘A p p l y ’ to save change s, or click ‘Re set ’ to clear the texts in all fields.
3 ‐ 2 ‐ 3 MAC Addre ss Fi l t e r i n g This function wi ll help yo u to pre ven t unauthoriz ed user s from connecting to yo ur.
All MAC a ddress en tries will be list ed in this page : To delete one or more entries lis te d here, plea se .
3 ‐ 2 ‐ 4 WPS (W i ‐ Fi Pr ot ecte d Set up) Settings WPS (W i ‐ Fi Pr otect ed Setup) pr ovides a convenie nt way to esta bl is h the connectio n between thi s broa db and ro ut er and wireless clients.
broadband router . Reg ist rar: This broad band router will act as WPS registr ar and wa it for wireless clien ts to send WPS configur ation reque st.
3 ‐ 3 Adva n ce Settings This ro u te r pr ovides var io us network func tionalities li k e QoS and DDNS, and yo u ca n configure these functions in ‘A d v a n c e d Settings’ menu.
3 ‐ 3 ‐ 1 QoS Quality of ser vice provide s an effi cie nt way fo r comp uters on the netwo rk to share the internet bandwidth with a pr omised quality of internet service.
Here ar e descriptions of every setup items: Item Name Description Enable QoS Check this bo x to enable QoS function, uncheck it to disable QoS.
the IP addre ss in left field only . Rem ote Po r t Range Set the port r ange that will activ at e this QoS rule.
Please click ‘A p p l y ’ to save change s you made and resta rt the br oadband ro u te r , this req u ires about 30 seconds.
3 ‐ 3 ‐ 2 DDNS DDNS (Dynamic DNS) is a IP ‐ to ‐ Ho stname mapping service fo r those Internet users who don’t have a stati c (fix e d) IP addre ss.
Here ar e descriptions of every setup items: Item Name Description Dynamic DNS If you wa nt to enable DDNS function, ple.
(This field wi ll appear only when authentica tion type is QRC). When yo u finished with the settings in this page, you .
3 ‐ 3 ‐ 3 Po r t Forw ar ding This function allows yo u to redi re ct a single port or consecutive ports of In t erne t IP addr ess to the same port of the IP addres s on local network .
field. Comment Please input any text to de scribe this mapping, up to 16 alphanumerical char acters. Add Add the mapping to port forw arding table. Res et Rem ov e all inputt e d va lu es .
3 ‐ 3 ‐ 4 DMZ Demilitarize d Zon e (DMZ) is a special ar ea in you r local network. This ar ea resi des in local network, and all comp uters in this ar ea use s privat e IP addr ess, too.
up to 16 alphanumerical char acters. Add Add the mapping to port forw arding table. Res et Rem ov e all inputt e d va lu es .
3 ‐ 5 NA T Network addr ess tr anslations solve the pr oblem if sharing a single IP ad dres s to multiple compu ters.
3 ‐ 5 ‐ 1 Vi r t u a l Ser ver This function allows yo u to redi re ct a port on Int ernet IP addr ess (on WA N port) to.
Here ar e descriptions of every setup items: Item Name Description Enable V irtual Serv er Check this bo x to enable virtual server , and uncheck this box to disable virtual server .
When yo u finished with the settings in this page, you can click ‘A p p l y ’ butt on to save change s you made in this pag e, or yo u can click ‘Cancel’ to discard chang es.
3 ‐ 5 ‐ 2 Special Applications Some applications re qui re more than one connection a time; the se applica tions won’t wo rk with simple NA T rules.
blank. UDP Po r t to Op en Input the UDP port number require d by the spe ci al application, the port number can be a single va lu e , or a r ange (li k e 20 ‐ 50).
When yo u finished with the settings in this page, you can click ‘A p p l y ’ butt on to save change s you made in this pag e, or yo u can click ‘Cancel’ to discard chang es.
3 ‐ 5 ‐ 3 UPnP Setting BR ‐ 6228nS_nC br oadband ro u te r support s UPnP (univ ersal plug ‐ and ‐ pla y), which allows other network .
3 ‐ 5 ‐ 4 AL G Settings AL G (Application La yer Gatew a y) is a kind of network connection abi lity support fo r specific network applications li k e gam e and inst ant online chat.
3 ‐ 5 ‐ 5 Sta tic Ro ut i n g In most c ases, all you r computer s on local network will use default gateway (gener ally provide d by you r ISP) to access servers on In ternet .
If you want to delete a specific stati c ro ut e entry , check the ‘select ’ bo x of the stat ic ro u te entry you wa nt to delete, then click ‘Delete Selecte d’ butt on.
3 ‐ 6 Fi r e w a l l This broa d band ro u te r supports sever al firew all functions which will help yo u to pr ot ect yo ur network and comp uter .
not required. (i.e. If the MA C address label of your wireless device indicate s ‘a a ‐ bb ‐ cc ‐ dd ‐ ee ‐ ff ’ or ‘ aa:bb:.
If you wish to use IP addr ess ‐ base d filtering, please use ‘IP Fil t e r i n g Ta b l e ’ in this page : Please.
Yo u can select multiple services here. If you wish to deny or allow all services of certain IP add ress (es ), please select both ‘T C P’ and ‘UDP ’ .
When yo u finished with the settings in this page, you can click ‘A p p l y ’ butt on to save change s you made in this pag e, or yo u can click ‘Cancel’ to discard chang es.
3 ‐ 6 ‐ 2 URL Blocking If you want to prevent comp uters in local network from acce ssing certain website (li k e pornogr ap.
one URL/Ke ywor d). If you want to delete all URL/K eyword list ed her e, please click ‘Delete All’ button, or you can also click ‘Re set ’ button to unselect all URL/Keyw or ds.
3 ‐ 6 ‐ 3 DoS Denial of Service (DoS) is a common atta ck measur e, by transmitting a gr ea t amount of data or req .
scanner ’ to know how many ports of your Int ernet IP addre ss are open, and they can collect a lot of valuable information by doing so.
Po r t Scan Many kind of port scan methods are list ed here, please check one or more DoS att ack methods you want to prevent.
3 ‐ 6 ‐ 4 Pa re n ta l Control For those fa mi lies who have children in the house, parental cont rol is a ve ry useful .
dropdown list, then click << button. Please not e that only active (connecte d to LA N port of this broad band router and swit che d on) comput er ’ s MAC addre ss will be liste d here.
3 ‐ 7 St atus In this menu, yo u can check the opera tion stat us of this br oadband ro u te r . To view the stat us , follo w the follo wing instructions: 1.
3 ‐ 7 ‐ 1 Int ernet Connection This page shows the current statu s of Int ernet connection. .
3 ‐ 7 ‐ 2 Device Status This page shows curren t wirele ss LA N and wir e d LA N configuration.
3 ‐ 7 ‐ 3 Syste m Log This page shows all logged syste m inf ormation. Yo u can use scr oll bar to view the logs, or click ‘Sav e’ to downlo ad the log file to yo ur com puter .
3 ‐ 7 ‐ 4 Security Log This page shows all logged security ‐ re la ted inf ormation. Yo u can use scr oll bar to view the logs, or click ‘Sav e’ to download the log fi le to yo u r compu ter .
3 ‐ 7 ‐ 5 Act iv e DHCP Client This page shows all curren t DHCP clients. Yo u ca n click ‘Refr esh’ to re l oad the list.
3 ‐ 7 ‐ 6 Sta tistics This page shows the stat ist i ca l inf ormation of network interfaces of this br oadband ro u te r , and the tota l sys te m uptime.
3 ‐ 8 T ools This broa d band ro u te r comes with several tools that will help yo u to manag e the configu ration of br oadband ro u te r , upgra de the firmw are, and restar t the br oadband ro u te r .
3 ‐ 8 ‐ 1 Configuration T ools In this page, yo u ca n backup and restore cur ren t syst em configuration, and reset all settings to fa c t o r y def a ult va lu e.
3 ‐ 8 ‐ 2 Fi r m w a r e Upgra de New firmware relea ses will provide new functions to this broa dband ro ut e r , and you can use firmw are upgrade function to upgrade the firmwar e to new ve rsio n.
3 ‐ 8 ‐ 3 Resta rt If you f ound that the broa d band rou te r is not functioning correc tly , or r esponding slowly then us.
3 ‐ 9 Language This broa d band ro u te r ’ s web ‐ based user int e rface support s sever al la nguages. Yo u can change the display language by click ‘Language’ bu tton in main menu.
.
An important point after buying a device Edimax BR-6228nS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edimax BR-6228nS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edimax BR-6228nS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edimax BR-6228nS you will learn all the available features of the product, as well as information on its operation. The information that you get Edimax BR-6228nS will certainly help you make a decision on the purchase.
If you already are a holder of Edimax BR-6228nS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edimax BR-6228nS.
However, one of the most important roles played by the user manual is to help in solving problems with Edimax BR-6228nS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edimax BR-6228nS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center