Instruction/ maintenance manual of the product MS-40BP Echo
Go to page of 13
011289 R0211 Careful l y Read These Instructions Be f ore Use W ARNING! Model MS-40BP 4.0G/15.1L Use and Care Manual Backpack.
1E IMPROPER USE OR F AILURE TO FOLLOW INSTRUCTIONS CAN RESUL T IN PRODUCT F AILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. RULES FOR SAFE OPERA TION Before assembling and operating your sprayer, read all instructions thoroughly.
Wand Shut-off Valve Retaining Nut O-ring NOZZLE ASSEMBLY Figure 1-2 Unscrew the nozzle cap (1 ) from the nozzle body (3 ) with retaining nut (2 ) fastened tightly to the elbow (5 ) . Unscrew the retaining nut (2 ) . Push the nozzle body (3) with the nozzle gasket (4) out of the retaining nut (2 ) .
3E INS T ALLING THE PUM P HANDLE The pump handle can be mounted on either side of the pump shaft (A). T o install the pump handle place the handle (C) over the shaft (A) aligning the pump handle hole and shaft hole. Push the straight side of the cotter pin (B) through the aligned hole as shown in figure 1 thru 3.
4E Stage 4 (Removable Shut-off filter) 4 STAGE FILTERING SYSTEM This backpack sprayer is equipped with a 4 stage filtering system (see figure 1). Stage 1 is a filter basket incorporated into the tank opening where fluid is added. Stage 2 and 3 filters are located at the inlet of the pressure cylinder.
5E SPR A YER COMPONENTS & USE INFORM A TION, Continued HELPFU L SPR A YING INFORM A TIO N Use RAPID pump strokes to prime the pump. Y ou will know the pressure chamber is filling with liquid when you feel firm resistance from the pump. The air in the pressure chamber is co m pressed from repeated strokes.
6E TROUBLE SHOOTING YOUR SPR A YER DÉMONTER ET RÉP ARER LA POMPE À PISTON 7F 1) Retirez la goupille fendue et la poignée de la pompe. Placez la pompe vers vous et déposez l'appareil sur le dos (figure 1). Desserrez la pince du boyau et retirez le boyau du pulvérisateur.
1) Remove the cotter pin and pump handle. W ith the pump facing towards you, lay the unit on its back (Fi g ure 1). Loosen the hose clamp and remove the sprayer hose. Caution: There could be r e sidual liquid in the hose and pressure cylinde r . Remove the nut and bolt from the protective cap and remove the cap (ref: figure 9).
7) Apply Petroleum jelly to the inside of the piston cylinder wall and on the colla r , and reinstall the piston assembly into the piston cylinde r . 8) Insert the piston at an angle with the leading edge of the collar placed over the slot in the piston cylinder.
1) Assembled shut-o f f valve (Figure 1) . 2) Remove the retaining pin (A) (Figure 2) place the notched end of the retaining pin on a hard surface and push down. Remove the retaining pin and slide the handle o f f the valve stem . 3) Remove the retaining nut (o-ring attached), spring, and valve stem (B) (Figure 3).
REPLACEMENT P A R TS ORDER INFORM A TION 10E 99944100477 Shut-off Valve Repair Kit NOZZLE ASSEMBL Y 99944100484 Flat Fan Nozzle 99944100483 Poly Adjustable Nozzle 99944100482 Brass Adjustable Nozzle S.
REPLACEMENT P A R TS ORDER INFORM A TION 99944100488 Wand Clips Wand O-ring Elbow O-ring Hose Gasket Nozzle Gasket 99944100486 O-ring Kit Upper ValvePlate Upper O-ring Lower O-ring Piston Collar 99944.
ECHO LIMITED WARRANTY STATEMENT FOR SPRAYERS SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY ECHO Incorporated’s Limited Warranty, provides to the original end user purchaser that this ECHO product is free from defects in material and workmanship.
An important point after buying a device Echo MS-40BP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Echo MS-40BP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Echo MS-40BP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Echo MS-40BP you will learn all the available features of the product, as well as information on its operation. The information that you get Echo MS-40BP will certainly help you make a decision on the purchase.
If you already are a holder of Echo MS-40BP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Echo MS-40BP.
However, one of the most important roles played by the user manual is to help in solving problems with Echo MS-40BP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Echo MS-40BP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
