Instruction/ maintenance manual of the product MS-53BPE Echo
Go to page of 14
Model MS-53BPE 5G/ 20L 013566 R0314 Carefully Read These Instructions Before Use W ARNING Use and Care Manual Backpack Backpack Sprayer Sprayer.
W ARNING WARNING: Handling the brass parts of this product will expose you to lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Wash hands after handling. CAUTION 1E WARNING: Improper use or failure to follow instructions can result in explosive failure causing serious eye or other injury.
1. Poly Nozzle Cap 2. Retaining Nut 3. Nozzle Body 4. Nozzle Gasket 5. Elbow Figure 3 Figure 2 Figure 1 1. Brass Nozzle Cap 2. Retaining Nut 3. Nozzle Body 4.
The sprayer includes all hardware necessary for installing the pump handle. Install the pump handle into the base (A). Center the hole in the handle between the cut-out on the bottom of the tank base (B). Push the “C” clip over the pump handle while aligning the nub on the clip with the hole in the handle (C).
The backpack strap is provided with multiple features including shoulder strap and waist strap (figure 1). The top of the shoulder strap is attached to the top of the tank and is removable. The strap attaches to the base of the sprayer by sliding the buttons into the slots until they snap into place (Figure 2).
5E SPRA YER COMPONENTS & USE INFORMA TION, Continued HELPFUL SPRAYING INFORMATION Use RAPID pump strokes to prime the pump. You will know the pressure chamber is filling with liquid when you feel firm resistance from the pump handle. The air in the pressure chamber is compressed from repeated strokes.
Shut-off leaks Connections loose Tighten connection Worn or damaged shut-off Rebuild or replace the shut-off valve Wand assembly leaks Connections loose Tighten connection Damaged or worn o-ring/gaske.
7E PUMP DISASSEMBL Y AND REBUILD 1) Insure the tank and pressure chamber contents are emptied and pressure has been released in the pressure chamber. To release pressure in the pressure chamber activate shut-off valve and release all pressure. 2) Reach into tank fill opening and remove agitator bar from pressure chamber body (Figure 1).
8E Pressure Chamber Housing Gasket and Felt Washer Slide both the gasket and felt washer off the pressure chamber body (Figure 6). Replace felt washer first taking care not to fold over washer as it is worked up the pump chamber and into the pump locking ring (figure 7).
9E 5) Remove the three bolts attaching the piston cylinder to the bottom of the tank (Figure 4). 6) Reach in through the tank fill opening and remove the piston cylinder. 7) Remove check valve cartridge assembly from bottom of piston cylinder utilizing pump handle clip (clip has flat blade incorporated into end).
1) Assembled shut-off valve (Figure 1). 2) Remove the retaining pin (A) (Figure 2) place the notched end of the retaining pin on a hard surface and push down. Remove the retaining pin and slide the handle off the valve. 3) Remove the retaining nut (o-ring attached), spring, and valve stem (B) (Figure 3).
REPLACEMENT P AR TS ORDER INFORMA TION 11E 569019 Link Arm Assembly 569026 Pump Handle w/clip 99944100479 Hose Assembly Hose Washer Retaining Nut Hose 99944100477 Shut-off Valve Repair Kit 99944100478.
569028 Pressure Chamber Housing 569024 Piston Cylinder Kit REPLACEMENT P AR TS ORDER INFORMA TION 569021 Pump Seal Kit 569023 Valve cartridge kit 569020 O-ring kit 569002 Filter Basket & Cap 99944.
MS-53BPE MSP10000001 - MS-53BPE MSP99999999.
An important point after buying a device Echo MS-53BPE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Echo MS-53BPE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Echo MS-53BPE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Echo MS-53BPE you will learn all the available features of the product, as well as information on its operation. The information that you get Echo MS-53BPE will certainly help you make a decision on the purchase.
If you already are a holder of Echo MS-53BPE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Echo MS-53BPE.
However, one of the most important roles played by the user manual is to help in solving problems with Echo MS-53BPE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Echo MS-53BPE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
