Instruction/ maintenance manual of the product Series NRX Eaton
Go to page of 4
Effective 10/08 For more information visit: www.eaton.com/seriesnrx 1 IL01301016E (1) Only qualified electrical per- sonnel should be permitted to work on the equipment. (2) Always de-energize primary and secondary circuits when performing these procedures.
Effective 10/08 For more information visit: www.eaton.com/seriesnrx 7 IL01301016E 2 For more information visit: www.eaton.com/seriesnrx Effective 10/08 IL01301016E Section 2: Rear Mounted Connections .
Effective 10/08 For more information visit: www.eaton.com/seriesnrx 3 IL01301016E Universal Bus Adapter Proceed with the following 3 steps: Step 1: Bolt a universal bus adapter to the vertically posit.
Effective 10/08 For more information visit: www.eaton.com/seriesnrx 5 IL01301016E the cable retaining setscrews. Refer to T able 1 for details specific to cable adapters available from Eaton. Periodically check all mounting hard- ware for proper torque loading.
An important point after buying a device Eaton Series NRX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eaton Series NRX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eaton Series NRX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eaton Series NRX you will learn all the available features of the product, as well as information on its operation. The information that you get Eaton Series NRX will certainly help you make a decision on the purchase.
If you already are a holder of Eaton Series NRX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eaton Series NRX.
However, one of the most important roles played by the user manual is to help in solving problems with Eaton Series NRX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eaton Series NRX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
