Instruction/ maintenance manual of the product PGS800256 Diamond Systems
Go to page of 12
Pegasus Fast Start Guide DSC Document #7460572 Rev A Pegasus is a rugged, low ‐ power PC/104 ‐ Plus Single Board Computer (S.
Pegasus Fast Start Guide 7460572 Rev A Page 2 of 12 CONNECTOR FUNCTIONS The board conforms to PC/104 specifications for the four corners and four mounting holes.
Pegasus Fast Start Guide 7460572 Rev A Page 3 of 12 Figure 2. Pegasus bottom drawing showing connector and jumper locations The following pages describe the pin outs for the Pegasus connectors.
Pegasus Fast Start Guide 7460572 Rev A Page 4 of 12 MAIN POWER INPUT CONNECTOR (PWR1) Input power may be supplied either through this connector, the I/O power connector, or directly through the PC/104 bus power pins.
Pegasus Fast Start Guide 7460572 Rev A Page 5 of 12 SERIAL PORT CONNECTOR (COM1) This connector provides access to the 2 serial ports from the CPU chip.
Pegasus Fast Start Guide 7460572 Rev A Page 6 of 12 PS/2 KEYBOARD / MOUSE CONNECTOR (KBMS1) This connector provides the standard PS/2 keyboard and mouse signals.
Pegasus Fast Start Guide 7460572 Rev A Page 7 of 12 VGA CONNECTOR (VGA1) This connector provides the connection for a VGA display.
Pegasus Fast Start Guide 7460572 Rev A Page 8 of 12 JUMPER FUNCTIONS COM2 RS ‐ 232/422/485 SELECTION (JRS1) Using jumper JRS1, the COM2 port can be configured to operate in RS ‐ 232, RS ‐ 422 or RS ‐ 485 mode.
Pegasus Fast Start Guide 7460572 Rev A Page 9 of 12 LVDS PANEL VOLTAGE SELECT (JVLCD1) Using jumper JVLCD1, the input power voltage for the LVDS panel can be selected.
Pegasus Fast Start Guide 7460572 Rev A Page 10 of 12 POWERING ON PEGASUS Follow these steps to power on and verify the functionality of the Pegas us SBC. Thi s process assumes you have a Pegasus SBC and cable kit.
Pegasus Fast Start Guide 7460572 Rev A Page 11 of 12 BIOS CONFIGURATION FOR THE ISA BUS I/O ADDRESSES The default configuration for the ISA bus is as follows. Together these two connectors comprise connector PC104PI.
Pegasus Fast Start Guide 7460572 Rev A Page 12 of 12 CONFIGURING IDE DEVICES The on ‐ board PCI IDE connector supports two IDE devices: a primary master and a primary slave.
An important point after buying a device Diamond Systems PGS800256 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Diamond Systems PGS800256 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Diamond Systems PGS800256 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Diamond Systems PGS800256 you will learn all the available features of the product, as well as information on its operation. The information that you get Diamond Systems PGS800256 will certainly help you make a decision on the purchase.
If you already are a holder of Diamond Systems PGS800256, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Diamond Systems PGS800256.
However, one of the most important roles played by the user manual is to help in solving problems with Diamond Systems PGS800256. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Diamond Systems PGS800256 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
