Instruction/ maintenance manual of the product DM/F300-1E1-PCI Dialogic
Go to page of 2
For more information about Linux configuration files, see the Software Installation Reference . After the hardware and system so ftware are installed, refer to the proper configuration files to retrieve the board instance (ID) number(s) assigned to the board(s) in your system.
4. If you are not installing your board in an ISA form factor PCI slot, remove the ISA edge retainer from the board. 5. Using the slot’s board guides, insert the edge connector of the board into the bus slot. Press firmly until the board is securely seated in the slot.
An important point after buying a device Dialogic DM/F300-1E1-PCI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dialogic DM/F300-1E1-PCI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dialogic DM/F300-1E1-PCI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dialogic DM/F300-1E1-PCI you will learn all the available features of the product, as well as information on its operation. The information that you get Dialogic DM/F300-1E1-PCI will certainly help you make a decision on the purchase.
If you already are a holder of Dialogic DM/F300-1E1-PCI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dialogic DM/F300-1E1-PCI.
However, one of the most important roles played by the user manual is to help in solving problems with Dialogic DM/F300-1E1-PCI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dialogic DM/F300-1E1-PCI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
