Instruction/ maintenance manual of the product DVP04TC-S Delta Electronics
Go to page of 2
http: //www.del ta.com .tw/i ndustr ialautom ation / DVP04TC-S Thermocouple Sensors Instruction Sheet 1 W ARNING Always read this instruction thoroughly before using the DVP04TC-S.
2. CR#1: Used to set the working mode of four channels (CH1~CH4). There a re 2 modes (J-type and K-type) for each channel an d can be set indi vidually . F or example, If you want to set CH1~CH4 as following: CH1: mode 0 (b2~b0=000), CH2: mode 1(b5~b3=001), CH3: mode 0(b8~b6=000) and CH4: mode 1(b1 1~b9=001), you should set CR#1 to H0208.
An important point after buying a device Delta Electronics DVP04TC-S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta Electronics DVP04TC-S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta Electronics DVP04TC-S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta Electronics DVP04TC-S you will learn all the available features of the product, as well as information on its operation. The information that you get Delta Electronics DVP04TC-S will certainly help you make a decision on the purchase.
If you already are a holder of Delta Electronics DVP04TC-S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta Electronics DVP04TC-S.
However, one of the most important roles played by the user manual is to help in solving problems with Delta Electronics DVP04TC-S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta Electronics DVP04TC-S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
