Instruction/ maintenance manual of the product DVP02DA-S Delta Electronics
Go to page of 2
http:// www . delta. com.tw /products/p lc.asp DVP02DA-S DVP02DA-S Analog Output Module Instruction Sheet 1 WA R N I N G Please carefully read this instruction thoroughly prior to use the DVP02DA-S. The DC input power must be OF F before any maintenance.
8. CR#31 is used to set RS-485 communication addr ess. The setting range is from 01 to 254. The factory setting is K1. 9. CR#32 is used t o set RS-485 communication baud rate: 4800, 9600, 19200, 38400.
An important point after buying a device Delta Electronics DVP02DA-S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta Electronics DVP02DA-S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta Electronics DVP02DA-S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta Electronics DVP02DA-S you will learn all the available features of the product, as well as information on its operation. The information that you get Delta Electronics DVP02DA-S will certainly help you make a decision on the purchase.
If you already are a holder of Delta Electronics DVP02DA-S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta Electronics DVP02DA-S.
However, one of the most important roles played by the user manual is to help in solving problems with Delta Electronics DVP02DA-S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta Electronics DVP02DA-S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
