Instruction/ maintenance manual of the product DE302HB DeLonghi
Go to page of 16
INST ALLA TION and SER VICE INSTRUCTIONS USE and CARE INSTRUCTIONS distributed by DèLonghi Pty Ltd DOMINO VITROCERAMIC HOB model DE302HB.
2 Dear Customer , Thank you for having pur chased and given your pr efer ence to our pr oduct. The safety pr ecautions and r ecommendations r eported below ar e for your own safety and that of others. They will also pr ovide a means by which to make full use of the featur es offer ed by your appliance.
3 BEFORE USING FOR THE FIRST TIME • Read the instructions carefully before installing and using the appliance. • After unpacking the appliance, make sure it is not damaged. In case of doubt, do not use the appliance and contact your supplier or a qualified engineer.
4 INST ALLA TION Figur e 1 CAUTION: This appliance shall only be serviced by authorized personnel. • This appliance is to be installed only by an authorised person according to the cur- rent local regulations and in observation of the manufacturer’s instructions.
This cooktop can be built into a working surface 20 to 40 mm thick and 600 mm deep. In order to install the ceramic hob into the kitchen fixture, a hole with the dimensions shown in figure 1 has to be.
Figur e 3 Figur e 4 20 mm min. 40 mm max. F ASTENING THE COOKTOP Each cooktop is supplied with a set of tabs and screws to fasten it on units with a work- ing surface from 2 to 4 cm deep. The kit includes 4 tabs A and 4 self-threading screws B (fig. 4).
ELECTRICAL SECTION 7 A suitable isolating s witch providing full dis connection from the mains po wer supply (under overvoltage category III conditions) shall be incorporated in the permanent wiring, mounted and positioned to comp ly with the local wiring rules and regu lations.
F Figur e 5 Figur e 6 Figur e 7 REP AIRS Replacing the supply cable T urn the cooktop over and unhook the terminal boar d cover by inserting a scr ewdriver into the two hooks “A”. Open the cable gland by unscr ewing scr ew “F”, unscrew the terminal scr ews and r emove the cable.
Figur e 8 ELECTRIC DIAGRAM 9 P2 P1 L N M On Hot S2 S1 2 4 H S 2 S H 4 4 A F1 F2 (LOAD1) (PILOT) (LOAD2) (PHASE) (N) 532009 INVENSYS MDP-1 10-FPC 532008 INVENSYS MP-101-FPC (LOAD) (PHASE) (N) (PILOT) E.
VITROCERAMIC HOB Figur e 9 FEA TURES - Electrical insulation Class I. GENERAL FEA TURES 1. Hi-light cooking zone Ø 140 mm - 1200 W 2. Double hi-light cooking zone Ø 180/120 mm - 1700/700 W CONTROL P ANEL DESCRIPTION 3. Hotplate 1 contr ol knob 4. Hotplate 2 contr ol knob 5.
How to use your Ceramic Hob HI-LIGHT SINGLE ZONE (fig. 10) The heating element is formed of a coil of resistant material which reaches the working temperature quickly. This zone is controlled by a continuous energy regulator switch (fig. 11 ). The heat intensity can be regulated con- tinuously from “ MIN ” to “ MAX ”.
HI-LIGHT DOUBLE ZONE (fig. 12) The heating element is formed of a 2 coils of resistant material which reaches the work- ing temperature quickly. Th ese zone s are controlled by a continuous energy regulator switch (fig. 13). You may choose to use the inner zone only ( ) or the fual dual cooking zone ( ).
RESIDUAL HEA T INDICA TOR The hob also features a warning lamp which is wired to the cooking zones. When the temperature of a cooking plate is over 60°C, the warning lamp is also lit-up to warn of heat on the surface of the hob. This lamp also stays on after the cooking plates have been switched off to shown that the hob surface is still hot.
SAFETY HINTS • Before you switch the hob on, make sure you know which touch controls the required cooking zone. We advise you to set the pan over the cooking zone before switching it on. • Do not use pots and pans with rough bases (pay attention to cookware made of cast-iron).
Cleaning and Maintenance Before you begin cleaning make sure that the hob is switched off. • Remove spillages and other types of incrustations. • Dust or food particles can be removed with a damp cloth. • If you use a detergent, please make sure that it is not abrasive or scouring.
cod. 1103769 - ß1 Descriptions and illustrations in this booklet are given as simply indicative. The manufactur er reserves the right, considering the characteristics of the models described here, at any time and without notice, to make eventual necessary modifications for their construction or for commercial needs.
An important point after buying a device DeLonghi DE302HB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeLonghi DE302HB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeLonghi DE302HB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeLonghi DE302HB you will learn all the available features of the product, as well as information on its operation. The information that you get DeLonghi DE302HB will certainly help you make a decision on the purchase.
If you already are a holder of DeLonghi DE302HB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeLonghi DE302HB.
However, one of the most important roles played by the user manual is to help in solving problems with DeLonghi DE302HB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeLonghi DE302HB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
