Instruction/ maintenance manual of the product BGB132-BI DCS
Go to page of 22
THE PROFESSIONAL SIDE BURNER Use a nd Ca re Guide MODELS: BGB131 BGB132 BGB131-BI BGB132-BI.
1 A MESSA GE T O OUR CUST OMERS We are glad that you selected the Professional Side Burner by DCS. Because this appliance c ontains features not found on any other burner , we recommend that you read this entire booklet before your first use . Keep it in a handy place as it has answers to questions that may occur during future use.
TA B L E O F CO N T ENTS 2 SAFET Y PRACTICES AND PRECA UTIONS ..................................................................................................3-4 SIDE BURNER 131/132 SIDE MOUNT MODEL INST ALLA TION ...................................
3 SAFET Y PRACTICES & PRECA UTIONS Improper use or installation is dangerous. Car efully follow these instructions. Always remov e the cover bef ore lighting the Prof essional Side Burner . Never use the Side Burner if a leak is present. Do not use a flame to check for gas leaks.
INST ALLA TION OF SIDE BURNER: All BGB131 and BGB132 models can be installed in c ombustible enclosure with zero clear ance from the back, sides and bottom.
5 SIDE BURNER 131/132 SIDE MOUNT MODEL INST ALLA TION 2 " 23- 3/4" 10-3/8" 26- 3/4" 12- 3/4 " 2 " 15 -3 / 4 " Standard construction 13-1/8" 10 - 1/4" 2&quo.
SIDE BURNER BUIL T-IN MODEL INST ALLA TION 6 INST ALLA TION OF SIDE BURNER BUIL T-IN: All BGB131-BI and BGB132-B I models can be installed in combustible enclosure with zero clearance from the back, side and bottom.
7 SIDE BURNER BUIL T-IN MODEL INST ALLA TION 22- 1/8" 2 " 25- 1/2" 10-1/16" 25- 1/2" 11- 3/4" 2 " 14 -3 / 4 " Single Side Burner Dual Side Burner Standard const.
8 GAS REQUIREMENTS GAS REQUIREMENTS: Ve rify the type of gas supply to be used, either natural or LP . Make sure the marked gas on the appliance rating plate(s) and hook-up kit agrees with that of the supply . Never c onnect an unregulated gas line to the appliance.
9 GAS REQUIREMENTS LP T ANK REQUIREMENTS A dented or rusty LP tank may be hazardous and should be checked by y our LP supplier . Never use a cylinder with a damaged valve . T he LP gas cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.
10 LEAK TESTING & LIGHTING INSTRUCTIONS WA R N ING: Do not sm oke while leak testing . Extinguish all open flames. Ma ke a soap solution of one par t liquid detergent, and one par t water . Never test for leaks with an open flame. F or LP units, check with a full cylinder .
11 LIGHTING INSTRUCTIONS MA TCH LIGHTING Hold a fireplace lit match near the burner ports, turn the control knob counterclockwise to “HI” .M o v e y our hand immediately once the burner is lit.
12 FINAL CHECKLIST Specified clearances maintained to combustibles . Pr ofessional Side Burner is properly mounted . All internal packaging removed . Burner is seated properly and does not rock. Each burner lights satisfactorily , individually or with adjacent burner lit.
13 GENERAL CLEANING BURNERS Fo r proper lighting and performance k eep the burners clean. I t is necessary to clean the burners if they do not light even though the igniter clicks , if there has been a severe boil o ver , or when the flame does not burn blue.
14 TROUBLESHOO TING Burner won ’t light when the ignition is pushed. Burner flame is yellow or orange , in c onjunction with the odor of gas. Lo w heat with k nob in “HI” position. Remove the burner grat e. With the control knob in the “OFF” position, listen to the electrode while engaging the ignition.
15 SINGLE SIDE BURNER P ARTS LIST FOR BGB131 & BGB131-BI NO TE: P art list t ypical for BGB131 & BGB131-BI models . Illustration sho ws BGB131-BI model.
16 DOUBLE SIDE BURNER P ARTS LIST FOR BGB132 & BGB132-BI NO TE: P art list t ypical for BGB132 & BGB132-BI models . Illustration sho ws BGB132-BI model.
17 SINGLE & DOUBLE SIDE BURNER WIRING DIA GRAM SP ARK ELECTRODE (P/N 12224) SP ARK ELECTRODE (P/N 12224) SINGLE SIDE B URNER DOUBLE SIDE B URNER 1.
18 WA R R A N T Y LENGTH OF W ARRANT Y DCS warrants all other Side Burner components parts and labor to the original purchaser to be free of factor y defects in material and workmanship for a period of one (1) y ear from the original date of purchase.
19 SERVICE HOW T O OBT AIN SERVICE: F or warranty ser vice, please contact your local service provider or DCS Customer Car e Center at (888) 281-5698, Monday thru Frida y , 6 am- 4:30 pm PST .
NO TES 20.
21 Pa rt No. 17712 Rev. B Litho in USA 03/2004 As product improvement is an ongoing pr ocess at DCS, we r eserve the right to change specifications or design without notice. 5800 Skylab Road, Huntington Beach, CA 92647 T el: 714.372.7000 • Fax: 714.
An important point after buying a device DCS BGB132-BI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DCS BGB132-BI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DCS BGB132-BI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DCS BGB132-BI you will learn all the available features of the product, as well as information on its operation. The information that you get DCS BGB132-BI will certainly help you make a decision on the purchase.
If you already are a holder of DCS BGB132-BI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DCS BGB132-BI.
However, one of the most important roles played by the user manual is to help in solving problems with DCS BGB132-BI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DCS BGB132-BI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
