Instruction/ maintenance manual of the product DRT366S Dacor
Go to page of 16
Installa tion Instr uc tion s Distinc tive Se ries Co ok t op Models: DRT304S, DRT366S Part No. 106522 Rev . B THIS APPLIANCE HAS BEEN TESTED IN ACCORDANCE WITH THE LA TEST EDITION OF ANSI Z21.
Installation Instructions .................................................... 7 Cooktop Installation .......................................................... 7 Gas Line Connection ....................................................... 8 Knob Installation .
1 Impor tant Infor mation About Safety Instructions The • Important Safety Instructions and warnings in this manual are not meant to cover all possible prob- lems and conditions that can occur . Use common sense and caution when installing, maintaining or oper- ating this or any other appliance.
2 Impor tant Safety Instructions Read the accompanying use and care manual com- • pletely before operating this appliance. Keep packaging materials away from children. • Plastic sheets and bags can cause suffocation. If you receive a damaged product, immediately con- • tact your dealer or builder .
3 Product Dimensions COOKTOP WIDTH (A) DRT304S 29 7/8” (759 mm) DRT366S 35 7/8” (91 1 mm) Installation Requirements W ARNING Observe all governing codes and ordinances during • planning and installation. Contact your local building department for further information.
4 Cabinet and Counter top Layout W ARNING T o avoid the risk of fire or personal injury , all minimum and maximum specified clearances on this and the following pages must be maintained or exceeded. General Considerations The minimum distance from the back of the cooktop • to a combustible rear wall is 2 1/2” (64 mm) minimum (Figure 1).
5 Recommended gas and electrical service location, consult local code B 10” (254 mm) to combustible side wall Min. both sides 1/2” (13 mm) overhang, both sides 1 1/2” (38 mm) typical countertop thickness 7 3/4” (197 mm) 36” (914 mm) typical Cooktop platform 1” (25 mm) Min.
6 Cabinet/Counter top Dimensions (cont.) Installation Requirements Cutout tolerances +1/16” -0 (+1.6 mm, 0) unless otherwise noted. Non-combustible rear wall, rear of mounting platform 10” (254 mm) min.
7 Installation Instructions Unpack the Cooktop W ARNING If the gas and electric service provided does not • meet the product specifications, do not proceed with the installation. Call the dealer , the gas supplier or a licensed electrician. The cooktop is heavy .
8 Installation Instructions Gas Line Connection W ARNING V erify that the gas supply meets specifications before • connection. See page 3. The maximum gas supply pressure to the regulator • must never exceed ½ pounds per square inch (psi) or 3.
9 Burner Component Installation W ARNING Never attempt to operate the cooktop with any of the burner parts removed. • Do not attempt to adjust the burner air mixture settings. All adjustments are preset at the factory . • Remove the burner parts and grates from their shipping packages.
10 V erifying Proper Operation W ARNING Make sure that power to the electrical outlet is turned • off at the circuit breaker or fuse box and that the gas is turned off at the gas supply valve before proceed- ing. The cooktop must be properly grounded at all times • when electrical power is applied.
11 W iring Diagrams O O O O B B RL IGNITOR RR IGNITOR FR IGNITOR S1 S2 S3 S4 B W B W B G RR RL FR FL B B B B FL IGNITOR RL FL FR RR B W B FL INDICA TOR LIGHT W B W B W B B W W W W Single Point Spark Module Single Point Spark Module Single Point Spark Module Single Point Spark Module 120V , 60Hz, 0.
12 W iring Diagrams O O O O O O B B B B B RL IGNITOR RC IGNIT OR RR IGNITOR FR IGNITOR FL IGNITOR FC IGNITOR S1 S2 S3 S4 S6 S5 W B W W W FL INDICA TOR LIGHT W B RL INDICA TOR LIGHT FC INDICA TOR LIGHT.
.
Dacor ● 1440 Bridge Gate Drive, Diamond Bar , CA 91765 ● T el: (800) 793-0093 ● F AX: (626) 403-3130 ● www .Dacor .com.
An important point after buying a device Dacor DRT366S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dacor DRT366S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dacor DRT366S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dacor DRT366S you will learn all the available features of the product, as well as information on its operation. The information that you get Dacor DRT366S will certainly help you make a decision on the purchase.
If you already are a holder of Dacor DRT366S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dacor DRT366S.
However, one of the most important roles played by the user manual is to help in solving problems with Dacor DRT366S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dacor DRT366S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
