Instruction/ maintenance manual of the product DWL-2210AP D-Link
Go to page of 16
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-2210AP . 08262004 Before You Begin Check Your Package Contents If any of the above items are missing, please contact your reseller .
2 Connecting the DWL-2210AP to Y our Network There are two methods of powering the DWL-2210AP . The power adapter can plug directly into the unit or plug into the PoE (Power over Ethernet) base unit. T o connect power directly to the DWL-2210AP , please follow the steps on this p age.
3 Connecting the DWL-2210AP to Y our Network (continued) Connecting PoE (Power over Ethernet) to the DWL-2210AP • Step 1 : Connect one end of an Ethernet cable (included with your package) to the LAN port on the DWL-2210AP and the other end of the Ethernet cable to the port labeled P+DA T A OUT on the PoE base unit.
4 When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Connecting the DWL-2210AP to Y our Network (continued).
5 Attach the wireless antenna to this connector . Pressing this button restores the Access Point to its original factory default settings. LAN Port Receptor Reset Button Antenna Connector Connects to a computer , a switch, router , or PoE base unit using an Ethernet cable.
6 The KickStart Wizard is used to discover and identify DWL-2210AP Access Points on a network with a DHCP server . KickS tart will not discover any other devices.
7 Click Administration Console KickS tart will display the Access Point(s) on your network. If necessary , click Back to rescan the network. Click Next Click OK The DWL-2210AP login screen will appear . T ype admin in the User name and Password fields.
8 The DWL-2210AP W eb-management interface will appear . Please refer to the user manual located on the CD-ROM for det ails on configuring the DWL-2210AP .
9 Using a Static IP Address to Connect to the DWL-2210AP T o assign a S tatic IP Address on the computer that you are using to configure the DWL-2210AP , follow the steps for the appropriate operating.
10 Go to Start > Settings > Network and Dial- up Connections . Double-click on the Local Area Connection associated with the Network Adapter installed on your system and select Properties . Click Properties Click Internet Protocol (TCP/IP) Select Use the following IP address Click OK Windows 2000: IP address: 192.
11 Go to Start > Settings > Control Panel > Double-click on the Local Area Connection associated with the Network Adapter installed on your system > select Properties Click Properties Click Internet Protocol (TCP/IP) Select Specify IP Address Click OK Windows Me & 98SE: IP address: 192.
12 Go to the Apple Menu and Select System Preferences. Select Built in Ethernet from the Show pull-down menu Click on Apply Now Select Manually in the Configuration pull-down menu Mac OS X: IP address: 192.168.0.28 Subnet mask: 255.255.255.0 Click on Network Input a static IP address in the same range as the DWL-2210AP’s IP address of 192.
13 Using a Static IP Address to Connect to the DWL-2210AP Click OK The DWL-2210AP login screen will appear . T ype admin in the user name and password fields. T ype http://192.168.0.50 in the address bar and hit Enter or Return. Open up your Web browser .
14 Using a Static IP Address to Connect to the DWL-2210AP The Web-management interface screen will appear . Click Advanced Click Ethernet.
15 Please refer to the user manual located on the CD-ROM for additional details on configuring the DWL-2210AP . Using a Static IP Address to Connect to the DWL-2210AP Under Connection T ype, Select Static IP Enter a Static IP Address , Subnet Mask , and Default Gateway .
T T T T T echni echni echni echni echni cal Support cal Support cal Support cal Support cal Support Y ou can find sof tware updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United S tates and within Canada for the duration of the warranty period on this product.
An important point after buying a device D-Link DWL-2210AP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought D-Link DWL-2210AP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data D-Link DWL-2210AP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, D-Link DWL-2210AP you will learn all the available features of the product, as well as information on its operation. The information that you get D-Link DWL-2210AP will certainly help you make a decision on the purchase.
If you already are a holder of D-Link DWL-2210AP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime D-Link DWL-2210AP.
However, one of the most important roles played by the user manual is to help in solving problems with D-Link DWL-2210AP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device D-Link DWL-2210AP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
