Instruction/ maintenance manual of the product DP-300 D-Link
Go to page of 38
About This Guide DP - 300+ Multi - protocol Ethernet/Fast Ethernet Print Server User’s Manual Rev. 01 (Nov, 2001) Made In Taiwan RECYCLABLE.
About This Guide T ABLE OF C ONTENTS A BOUT T HIS G UIDE .............................................................. V I NTRODUCTION ...................................................................... 6 DP - 300+ Print Server Features ..........
About This Guide Network Connection ................................................................ 18 Network Protocols ................................................................... 19 Management and Diagnostics ...............................
.
About This Guide 0 A BOUT T HIS G UIDE This manual describes the DP - 300+ Ethernet/Fast Ethernet Multiprotocol Print Server, including a description of the print server ’s features, as well as the print server install a tion procedures and troubleshooting self - test results.
Introduction 1 1 I NTRODUCTION The DP - 300+ Print Server is a compact prin t server which connects to your Ethernet or Fast Ethernet network anywhere you wish to locate printer services.
DP - 300+ Multiprotocol Fast Ethernet Print Server User’s Guide Introduction DP - 300+ Print Server Features DP - 300+ print servers improve network printing services in three ways: ♦ The DP - 300+ picks up the workload of managing print file traffic to its connected printers.
Introduction Unix lpr /lpd (HP - UX, SunOS, Solaris, SCO , UnixWare, IBM AIX) Windows NT/2000/XP LPR for Windows 95/98/Me Ne tWare 5.x NDPS LPR remote printing ♦ NetBEUI Windows NT/2000, Windows 95/.
DP - 300+ Multiprotocol Fast Ethernet Print Server User’s Guide Introduction Port Connectors The DP - 300+’s three printer ports are located on its rear panel. Two identical parallel ports are labeled LPT1 and LPT2 ; the single s e rial port is labeled COM .
Introduction Network Cable Connector The DP - 300+’s right side panel features an RJ - 45 connector for connection to 10Base - T Ethernet cabling or 100Base - TX Fast Ethernet cabling (which should b e Category 5 twisted - pair cable).
DP - 300+ Multiprotocol Fast Ethernet Print Server User’s Guide Introduction ♦ Power/Tx ◊ Steady or flashing green confirms that the DP - 300+ is po w ered on. ◊ The indicator blinks off briefly to indicate that the DP - 300+ is transmitting to the network.
Introduction Next, slide one bracket onto each end of the device as shown in the diagram below. Be sure each bracket is positioned correctly. Note when clicking each brack et into place, the round feet on the bottom of the device will line up with the round holes on the bracket.
DP - 300+ Multiprotocol Fast Ethernet Print Server User’s Guide Unpacking and Installation 2 2 U NPACKING AND I NSTALLATION This chapter explains how to install your DP - 300+ print server and connect it to the network. It also describes the print server self test indications, and tells how to wall - mount your print s erver.
Unpacking and Installation ♦ One Multi - language Quick Installation Guide If any item is missing, or if you find any damage or mismatch, promptly contact your dealer for assistance. Installing the DP - 300+ WARNING: Configuration problems may result if the DP - 300+ is powered up without first establishing its network connection.
DP - 300+ Multiprotocol Fast Ethernet Print Server User’s Guide Unpacking and Installation 5. While each printer is powered off, connect its tested and co n firmed port to a like printer port of the DP - 300+.
Unpacking a nd Installation Contact your dealer for correction of any LED problems before proceeding. The actual component tests immediately follow the L ED tests. A normal (no fault) result is signaled by a series of three cycles of sequential flashing of the three LEDs, followed by a quiescent state with all three LEDs dark.
DP - 300+ Multiprotocol Fast Ethernet Print Server User’s Guide Unpacking and Installation flashing off off Paral lel - 1 Controller error flashing flashing off Flash erase/program error flashing fl.
Product Specifications A 3 P RODUCT S PECIFICATIONS Printer Connection Standards : IEEE 1284 bi - directional parallel interface, RS - 232 Ports: Bi - directional 25 - pin parallel ports × 2, 9 - pin.
DP - 300+ Multiprotocol Fast Ethernet Print Server User’s Guide Product Specifications Network Connector : RJ - 45 connector for 10Base - T or 100 BASE - TX unshielded twisted pair connection; NWay automatic speed negotiation supported. Network Protocols Ethernet Frame Types: 802.
Product Specifications Dimensions : 190mm × 116.8mm × 30.9mm Weight : approx. 360g Operating Temperature : 0 to 50 ° C Storage Temperature : - 10 to 50 ° C Humidity : 10% to 90% non - condensing E.
DP - 300+ Multiprotocol Fast Ethernet Print Server User’s Guide Port Pinouts B 4 P ORT P INOUTS This appendix shows the pinouts of the DP - 300+ parallel and serial printer ports.
Port Pinouts 25 - pin Centronics Signal Source 10 10 nAck Printer 11 11 Busy Printe r 12 12 PError Printer 13 13 Select Printer 14 14 nAutoFd Host 15 32 nFault Printer 16 31 nInit Host 17 36 nSelectIn Host 18 - 25 16, 17, 19 - 30 Ground Serial Port The table below shows the pinout of the print server’s 9 - pin RS - 232 serial port.
DP - 300+ Multiprotocol Fast Ethernet Print Server User’s Guide Index 5 I NDEX 100Base - TX ....................................... 7 COM .................................................. 3 COM LED ....................................... 5, 9 DC power adapter .
.
6 O FFICES AUSTRA LIA D - LINK AUSTRALASIA Unit 16, 390 Eastern Valley Way, Roseville, NSW 2069, Australia TEL: 61 - 2 - 9417 - 7100 FAX: 61 - 2 - 9417 - 1077 TOLL FREE: 1800 - 177 - 100 (Australia), 0800 - 900900 (New Zealand) URL: www.dlink.com.au E - MAIL : support@dlink.
BBS: 1 - 949 - 455 - 1779, 1 - 949 - 455 - 9616 URL: www.dlink.com E - MAIL: tech@dli nk.com, support@dlink.com LIMITED WARRANTY D - Link provides this limited warranty for its product only to the person or entity who originally purchased the product from D - Link or its authorized reseller or distributor.
replaced by D - Link, or for which the purchase price is refunded, shall become the property of D - Link upon replaceme nt or refund. Limited Software Warranty: D - Link warrants that the software por.
Submitting A Claim . Any claim under this limited warranty must be submitted in writing before the end of the Warranty Period to an Authorized D - Link Service Office. The claim must include a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D - Link to confirm the same.
Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; and Any hardware, software, firmware or other product s or services provided by anyone other than D - Link.
Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoin g limitations and exclusions may not apply. This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state.
Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig - oder Aerosolreiniger.
17. Wenden Sie sich mit allen Fragen die Service und Repartur betreffen an Ihren Servicepartner. Somit stellen Sie die Betriebssicherheit des Gerätes sicher.
This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be r e quired to take adequate measures.
.
Register by mail or online at http://w ww.dlink.com/sales/reg/ 7 R EGISTRATION C ARD Print, type or use block letters. Your name: Mr./Ms _____________________________________________________________________________ Organization: ________________________________________________ Dept.
o System house/company o Other________________________________ 9. Would you recommend your D - Link product to a friend? o Yes o No o Don't know yet 10.
.
8.
An important point after buying a device D-Link DP-300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought D-Link DP-300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data D-Link DP-300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, D-Link DP-300 you will learn all the available features of the product, as well as information on its operation. The information that you get D-Link DP-300 will certainly help you make a decision on the purchase.
If you already are a holder of D-Link DP-300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime D-Link DP-300.
However, one of the most important roles played by the user manual is to help in solving problems with D-Link DP-300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device D-Link DP-300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
