Instruction/ maintenance manual of the product DAP-1350 D-Link
Go to page of 139
.
2 D-Link DAP-1350 User Manual T able of Contents Pr oduct Overview ........................................................ 5 P ac kage Contents.................................................... 5 System Requirements ................................
3 D-Link DAP-1350 User Manual T able of Contents Router Mode .................................................... 61 Setup Wizard ................................................ 62 Inter net Setup ............................................... 65 Dynamic IP (DHCP) .
4 D-Link DAP-1350 User Manual T able of Contents Wireless Basics ....................................................... 124 What is Wireless? ................................................ 125 Tips ..................................................
5 D-Link DAP-1350 User Manual Section 1 - Product Overview Product Over view Note: Using a pow er supply with a diff erent voltage r ating than the one included with the DAP-1350 will cause damage and v oid the warranty f or this product.
6 D-Link DAP-1350 User Manual Section 1 - Product Overview Network Requirements • An Ether net-based Cab le or DSL modem (router mode only) • IEEE 802.
7 D-Link DAP-1350 User Manual Section 1 - Product Overview Introduction D-Link, an industr y leader in networking, introduces the new D-Link D AP-1350 Wireless N Router/Access P oint.
8 D-Link DAP-1350 User Manual Section 1 - Product Overview T O T AL PERFORMANCE Co mbi nes aw ard win ni ng a cce ss p oint f eatu res an d Dr aft 802.
9 D-Link DAP-1350 User Manual Section 1 - Product Overview • F aster Wireless Networking - The D AP-1350 provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to par ticipate in real-time activities online, such as video streaming, onlin e gaming , and real- time audio .
10 D-Link DAP-1350 User Manual Section 1 - Product Overview Hardware Over view Connections Mode Selector Select from one of the three modes: AP (top) - Access P oint (AP) Mode CL (middle) - Wireless Client Mode RT (bottom) - Router Mode P ower Receptor Receptor for the supplied pow er adapter .
11 D-Link DAP-1350 User Manual Section 1 - Product Overview Hardware Over view Side USB P or t The USB por t is used to connect USB de vices such as a printer to share on your netw or k. Bottom WPS Button/LED Press to star t the WPS process. Y ou will hav e 120 seconds to star t the WPS process on another wireless de vice.
12 D-Link DAP-1350 User Manual Section 1 - Product Overview Hardware Over view LEDs P ower LED A solid light indicates a proper connection to the pow er supply . Wireless LED A solid light indicates that the wireless segment is ready . This LED b links during wireless data transmission.
13 D-Link DAP-1350 User Manual Section 2 - Installation Installation Please configure the D AP-1350 b y f ollowing the Install Guide poster . The next f e w pages will e xplain the diff erent operational modes y ou can use. Operation Modes Depending on how you want to use y our D AP-1350 will deter mine which mode you use.
14 D-Link DAP-1350 User Manual Section 2 - Installation Access Point Mode In the Access P oint mode, the D AP-1350 acts as a central connection point f or any computer (client) that has a 802.11n or bac kward-compatib le 802.11b/g wireless network interf ace and is within range of the AP .
15 D-Link DAP-1350 User Manual Section 2 - Installation Wireless Client Mode In the Wireless Client mode, the D AP-1350 acts as a wireless network adapter f or your Ether net-enab led de vice (such as a game console or a laptop). Connect your Ether net-enab led device to the AP using an Ether net cable .
16 D-Link DAP-1350 User Manual Section 2 - Installation Router Mode In the Router mode , the D AP-1350 connects to a broadband modem. In this mode , the D AP-1350 also acts as a router f or wireless clients on y our network and pro vides NA T (Network Address T ranslation) and a DHCP ser v er to generate IP addresses.
17 D-Link DAP-1350 User Manual Section 2 - Installation Wireless Installation Considerations The D-Link wireless access point lets you access your network using a wireless connection from vir tually anywhere within the operating range of y our wireless network.
18 D-Link DAP-1350 User Manual Section 3 - Configuration Configuration This section will sho w y ou ho w to configure y our ne w D-Link wireless access point using the w eb-based configuration utility .
19 D-Link DAP-1350 User Manual Section 3 - Configuration Cl ic k Lau nch Wir eles s S et up W iz ar d to con figur e y our a cc es s po in t an d sk ip t o th e ne xt p age . T o set up your wireless network, clic k Add Wireless Device With WPS and skip to page 24.
20 D-Link DAP-1350 User Manual Section 3 - Configuration Enter the De vice Name of the AP and click Next to continue . This is the NetBIOS name f or the AP . It is recommended to change the De vice Name if there is more than one D-Link de vice within the same wireless network.
21 D-Link DAP-1350 User Manual Section 3 - Configuration Clic k Save to sa v e y our network settings. In order f or y our network settings to tak e eff ect the AP will reboot automatically . When the de vice has finished rebooting the main screen will displa y .
22 D-Link DAP-1350 User Manual Section 3 - Configuration Select Manual as the configuration method to set up y our network manually . Clic k Next to contin ue.
23 D-Link DAP-1350 User Manual Section 3 - Configuration The follo wing screen will show y ou your network ke y to enter on y our wireless clients. Clic k Save to finish the Setup Wizard.
24 D-Link DAP-1350 User Manual Section 3 - Configuration This Wizard is designed to assist y ou in your wireless networ k setup . It will guide you through step-by-step instr uctions on how to set up y our wireless network and how to mak e it secure.
25 D-Link DAP-1350 User Manual Section 3 - Configuration Press the Push Button on the wireless de vice that y ou are adding to y our network to complete the setup . Select PBC to use the Push Button Configuration in order to connect to y our network.
26 D-Link DAP-1350 User Manual Section 3 - Configuration Enable Wireless: Wireless Mode: Wireless Network Name: Enable Auto Channel Scan: Wireless Channel: 802.11 Mode: Check the box to enable the wire less func tion. If you do not want to use wireless , uncheck the bo x to disable all the wireless functions.
27 D-Link DAP-1350 User Manual Section 3 - Configuration Select the Channel Width: A uto 20/40 - Select if you are using both 802.11n and non-802.11n wireless de vices. 20MHz - Select if you are not using an y 802.11n wireless clients. Select the transmit rate .
28 D-Link DAP-1350 User Manual Section 3 - Configuration LAN Setup This section will allow you to change the local networ k settings of the access point and to configure the DHCP settings. LAN Connection T ype: Device Name: Us e the drop -do wn men u to sele ct Dyna mic IP (DHCP) to automatically obtain an IP address on the LAN/private network.
29 D-Link DAP-1350 User Manual Section 3 - Configuration LAN Connection T ype: IP Address: Subnet Mask: Default Gateway: Device Name: Select Static IP from the drop-down men u. Enter the IP address of the access point. The def ault IP address is 192.
30 D-Link DAP-1350 User Manual Section 3 - Configuration MAC Address Filter Select Enab le or Disable from the drop-down menu. Enter the MA C address you would lik e to filter . T o find the MAC address on a computer , please ref er to the Networking Basics section in this manual.
31 D-Link DAP-1350 User Manual Section 3 - Configuration Advanced Wireless T ransmit Power: Beacon Period: DTIM Interval: RTS Threshold: Fragmentation Threshold: WMM Enable: Short GI: Sets the transmit po wer of the antennas . No te : T ra ns mit po we r is reg ul ate d b y int ern at io nal standard.
32 D-Link DAP-1350 User Manual Section 3 - Configuration User Limit Check the Enable User Limit bo x to enab le this f eature. Enter the maxim um n umber of clients, between 1 and 32.
33 D-Link DAP-1350 User Manual Section 3 - Configuration Password: Verify Password: Enable Graphical Authentication: Enter a new pass word f or the Administrator Login Name. The administrator can make changes to the settings. Enter the same passw ord that you entered in the pre vious te xtbo x in order to confir m its accuracy .
34 D-Link DAP-1350 User Manual Section 3 - Configuration Save to Local Hard Drive: Upload from Local Hard Drive: Restore to Factory Default: Reboot the Device: Use this option to sav e the current access point configuration settings to a file on the hard disk of the computer y ou are using.
35 D-Link DAP-1350 User Manual Section 3 - Configuration Browse: Upload: After you hav e downloaded the new fir mware , click Brow se to locate the fir mware update on y our hard drive .
36 D-Link DAP-1350 User Manual Section 3 - Configuration Time Zone: Daylight Saving: Enable NTP Server: NTP Server Used: Date and Time: Select the Time Zone from the drop-down menu. T o select Da ylight Saving time manually , clic k the Enable Da ylight Saving chec k box.
37 D-Link DAP-1350 User Manual Section 3 - Configuration Enter a name f or your ne w schedule. Select a day , a r ange of days , or All W eek to include e ver y da y . Check All Da ys or enter a star t and end time f or your schedule. Select On or Off from the drop-down men u.
38 D-Link DAP-1350 User Manual Section 3 - Configuration General: LAN: Wireless LAN: Displa ys the access point’ s time and fir mw are v ersion. Displa ys the MA C address and the pr iv ate (local) IP settings f or the access point. Displa ys the wireless MAC address and your wireless settings such as SSID and Channel.
39 D-Link DAP-1350 User Manual Section 3 - Configuration Logs The D AP-1350 k eeps a running log of e v ents and activities occurr ing on the AP . If the AP is rebooted, the logs are automatically cleared. Y ou can sav e the log files under Log Settings.
40 D-Link DAP-1350 User Manual Section 3 - Configuration Statistics T h e D AP -1 35 0 k e e p s st at is ti cs o f t h e tr a ffi c th at pa ss es t hr ou gh i t. Y ou c an v ie w th e a mo un t o f pa c k et s t h a t pa ss th ro ug h t h e L A N a n d w i r e l e s s p o r t io ns o f th e ne tw o rk .
41 D-Link DAP-1350 User Manual Section 3 - Configuration Wireless The wireless section allows y ou to view the wireless clients that are connected to y our wireless access point. Connection Time: MAC Address: Displa ys the amount of time the wireless client has been connected to the access point.
42 D-Link DAP-1350 User Manual Section 3 - Configuration Help.
43 D-Link DAP-1350 User Manual Section 3 - Configuration Wireless Client Mode If you wish to change the def ault settings or optimiz e the performance of the D AP-1350, you ma y use the web-based configur ation utility . T o access the configuration utility , open a web browser such as Inter net Explorer and enter dlinkap o r 192.
44 D-Link DAP-1350 User Manual Section 3 - Configuration This Wizard is designed to assist y ou in configuring your D AP-1350 as a wireless client. If you want to change the admin account pass word, enter a ne w pass word and click Next . It is strongly recommended to change y our pass word.
45 D-Link DAP-1350 User Manual Section 3 - Configuration F or PBC (Push Button Configuration), skip to the ne xt page. Se le ct PIN to con nect yo ur wir el es s de vi ce with WPS . Y ou ma y clic k Generate Ne w PIN to use a diff erent PIN number .
46 D-Link DAP-1350 User Manual Section 3 - Configuration Select PBC to use the Push Button Configuration to connect to y our network. Clic k Connect to continue . Note: Y ou may also press the WPS button located on the side of the D AP-1350 instead of r unning this wizard.
47 D-Link DAP-1350 User Manual Section 3 - Configuration Select Manual configuration to setup y our network manually . Clic k Next to contin ue. Enter the network name (SSID) of the network y ou w ant to con nect to . If yo u do not kno w the e xact nam e or would like to search for the wireless network, clic k Site Survey .
48 D-Link DAP-1350 User Manual Section 3 - Configuration If y ou select W P A o r W P A 2 , enter the wireless security pass word. Clic k Next to complete the Setup Wizard. The Wireles s Setup Wizard is comple te. Clic k Finish to reboot the de vice.
49 D-Link DAP-1350 User Manual Section 3 - Configuration Manual Wireless Setup Wireless Mode: Site Survey: Wireless T ype: Wireless Network Name: Wireless Channel: 802.11 Mode: Channel Width: T ransmission Rate: Wireless MAC Clone: Wireless Security Mode: WPS: Wireless Client Mode is selected.
50 D-Link DAP-1350 User Manual Section 3 - Configuration LAN Settings This section will allow you to change the local networ k settings of the access point and to configure the DHCP settings.
51 D-Link DAP-1350 User Manual Section 3 - Configuration Logout This section will allow you to change the local networ k settings of the access point and to configure the DHCP settings.
52 D-Link DAP-1350 User Manual Section 3 - Configuration Advanced Wireless T ransmit Power: RTS Threshold: Fragmentation Threshold: Short GI: Sets the transmit po wer of the antennas . No te: T r an smi t po w er is reg ul at ed b y in te r n ati ona l standard.
53 D-Link DAP-1350 User Manual Section 3 - Configuration En ter a ne w pas s wo rd f or th e Adm ini str at or Lo gin Name. The administrator can mak e changes to the settings. Enter the same passw ord that you entered in the pre vious te xtbox in order to confir m its accuracy .
54 D-Link DAP-1350 User Manual Section 3 - Configuration Save to Local Hard Drive: Load from Local Hard Drive: Restore to Factory Default: Reboot the Device: Use this option to sav e the current access point configuration settings to a file on the hard disk of the computer you are using.
55 D-Link DAP-1350 User Manual Section 3 - Configuration Browse: Upload: After you hav e downloaded the new fir mware , click Brow se to locate the fir mware update on y our hard drive .
56 D-Link DAP-1350 User Manual Section 3 - Configuration Time Zone: Daylight Saving: Enable NTP Server: NTP Server Used: Date and Time: Select the Time Zone from the drop-down menu. T o select Da ylight Saving time manually , clic k the Enable Da ylight Saving chec k box.
57 D-Link DAP-1350 User Manual Section 3 - Configuration General: LAN: Wireless LAN: Displa ys the access point’ s time and fir mw are v ersion. Displa ys the MA C address and the pr iv ate (local) IP settings f or the access point. Displa ys the wireless MAC address and your wireless settings such as SSID and Channel.
58 D-Link DAP-1350 User Manual Section 3 - Configuration Log Options: First Page: Last Page: Previous: Next: Clear: Log Settings: Refresh: Y ou can select the types of messages that you want to displa y from the log: System Activity , Debug Inf ormation , Attac ks , Dropped P ackets , and Notice .
59 D-Link DAP-1350 User Manual Section 3 - Configuration Statistics T h e D AP -1 35 0 k e e p s st at is ti cs o f t h e tr a ffi c th at pa ss es t hr ou gh i t. Y ou c an v ie w th e a mo un t o f pa c k et s t h a t pa ss th ro ug h t h e L A N a n d w i r e l e s s p o r t io ns o f th e ne tw o rk .
60 D-Link DAP-1350 User Manual Section 3 - Configuration Help.
61 D-Link DAP-1350 User Manual Section 3 - Configuration Router Mode If you wish to change the def ault settings or optimiz e the performance of the D AP-1350, you ma y use the web-based configur ation utility . T o access the configuration utility , open a web browser such as Inter net Explorer and enter dlinkap o r 192.
62 D-Link DAP-1350 User Manual Section 3 - Configuration Clic k Launch Internet Connection Setup Wizard to begin. If y ou w ant to enter y our settings without running the wizard, clic k Manual Internet Configuration Setup and skip to page 65. Setup Wizard Clic k Next to contin ue.
63 D-Link DAP-1350 User Manual Section 3 - Configuration Selec t y our time zone from the drop-do wn menu and then clic k Next to contin ue. Select the type of Inter net connection you use and then clic k Next to contin ue.
64 D-Link DAP-1350 User Manual Section 3 - Configuration If y ou selected Dynamic, you may need to enter the MA C address of the computer that was last co nne cte d di re ctl y to y ou r mo dem . If y ou ar e cu rr ent ly using that computer , clic k Clone Y our PC’ s MA C Address and then clic k Next to continue .
65 D-Link DAP-1350 User Manual Section 3 - Configuration Internet Setup If you opt to set up y our Inter net connection manually , y ou will be redirected to a W AN page that allo ws y ou to select y our Inter net type and enter the correct configuration par ameters.
66 D-Link DAP-1350 User Manual Section 3 - Configuration Dynamic IP (DHCP) Select Dynamic IP(DHCP) to obtain IP Address inf or mation automatically from y our ISP . Select this option if y our ISP does not giv e you an y IP number to use . This option is commonly used f or Cab le modem ser vices.
67 D-Link DAP-1350 User Manual Section 3 - Configuration Static IP Select Static IP if all W AN IP information is provided to you b y y our ISP . Y ou will need to enter in the IP address, subnet mask, gate wa y address , and DNS address(es) provided to y ou by y our ISP .
68 D-Link DAP-1350 User Manual Section 3 - Configuration PPPoE Sel ect PPP oE (P oint -to -P oint Proto col ov er Ethernet) if y our ISP use s a PPP oE connec tio n. Y our ISP will pro vide yo u with a user name and pass word. This option is typically used f or DSL ser vices .
69 D-Link DAP-1350 User Manual Section 3 - Configuration PPTP Choose PPTP (P oint-to-P oint T unneling Protocol) if y our ISP uses a PPTP connection. Y our ISP will pro vide y ou with a user name and pass word. This option is typically used f or DSL ser vices.
70 D-Link DAP-1350 User Manual Section 3 - Configuration L2TP Choose L2TP (P oint-to-P oint T unneling Protocol) if y our ISP uses a L2TP connection. Y our ISP will provide you with a user name and pass word. This option is typically used f or DSL ser vices.
71 D-Link DAP-1350 User Manual Section 3 - Configuration Wireless Setup Wizard Y ou ma y click Wireless Network Setup Wizard to quic kly configure your router . Ref er to the ne xt page. T o set up your wireless network, clic k Add Wireless Device With WPS and skip to page 76.
72 D-Link DAP-1350 User Manual Section 3 - Configuration T ype your desired wireless netw or k name (SSID). A ut oma tic all y: Se lec t th is opt ion to aut oma tic all y generate the router’ s network ke y and click Next . Manuall y: Select this option to manually enter y our network ke y and click Ne xt .
73 D-Link DAP-1350 User Manual Section 3 - Configuration If y ou selected Man ually assign a network key as the configuration method, enter your network ke y . This k e y must be entered on y our wireless clients. Chec k the Use WP A encryption instead of WEP bo x to use WP A Encr yption instead of WEP .
74 D-Link DAP-1350 User Manual Section 3 - Configuration If you select WP A , enter the wireless security pass word (8-32 characters). Click Ne xt to complete the Setup Wizard. Clic k Next to contin ue. The summar y screen will appear . Clic k Save to contin ue.
75 D-Link DAP-1350 User Manual Section 3 - Configuration F rom the Setup > Wireless Settings screen, click A d d Wireless Device with WPS . Add Wireless Device with WPS Wizard PIN: Select this option to use PIN method. In order to use this method y ou must know the wireless client’ s 8 digit PIN and clic k Connect .
76 D-Link DAP-1350 User Manual Section 3 - Configuration Wireless Settings Enable Wireless: Wireless Network Name: Wireless Mode: Enable Auto Channel Scan: Wireless Channel: T ransmission Rate: Channel Width: Visibility Status: Wireless Security Mode: Select this to turn the Wi-Fi module on and off .
77 D-Link DAP-1350 User Manual Section 3 - Configuration Network Settings Enter the IP address of the router . The def ault IP address is 192.168.0.1. If y ou change the IP address, once y ou click Apply , you will need to enter the new IP address in your browser to get bac k into the configuration utility .
78 D-Link DAP-1350 User Manual Section 3 - Configuration Check this box to enable the DHCP ser v er on your router . Uncheck to disab le this function.
79 D-Link DAP-1350 User Manual Section 3 - Configuration DHCP Reser vation If y ou want a computer or de vice to alwa ys ha v e the same IP address assigned, y ou can create a DHCP reser vation. The router will assign the IP address only to that computer or de vice.
80 D-Link DAP-1350 User Manual Section 3 - Configuration USB Settings Use this section to configure y our USB por t. Share P or t will be selected. Note: If using the ShareP or t option, users will need to install the ShareP or t Utility into the computers to share the USB de vice through the router .
81 D-Link DAP-1350 User Manual Section 3 - Configuration The D AP-1350 can be configured as a vir tual ser v er so that remote users accessing W eb or FTP ser vices via the public IP address can be automatically redirected to local ser v ers in the LAN (Local Area Networ k).
82 D-Link DAP-1350 User Manual Section 3 - Configuration This will allow y ou to open por ts (por t f orwarding). Enter a name for the rule or select an application from the drop-do wn menu. Select an application and click << to populate the fields .
83 D-Link DAP-1350 User Manual Section 3 - Configuration Application Rules Enter a name for the rule. Y ou ma y select a pre-defined application from the drop-down menu and clic k << . This is the por t used to tr igger the application. It can be either a single por t or a range of por ts.
84 D-Link DAP-1350 User Manual Section 3 - Configuration MAC Address Filter Select T ur n MAC Filtering Off , allow MA C ad dre sses lis ted bel o w , or de n y MA C add ress es listed below from the drop-do wn menu. Enter the MA C address you would lik e to filter .
85 D-Link DAP-1350 User Manual Section 3 - Configuration Enter the k eyw ords or URLs that you want to bloc k (or allow). Any URL with the keyw ord in it will be bloc ked. Website URL/ Domain: W ebsite Filters are used to deny LAN computers from accessing specific web sites b y the URL or domain.
86 D-Link DAP-1350 User Manual Section 3 - Configuration SPI (Stateful P ack et Inspection, also known as dynamic pac ket filtering) helps to pre vent cyber attacks b y tracking more state per session. It v alidates that the traffic passing through the session conf or ms to the protocol.
87 D-Link DAP-1350 User Manual Section 3 - Configuration Set the transmit po wer of the antennas . Note: T ransmit po wer is regulated b y inter national standard. Users are f orbidden to change its maximum limit. Beacons are pack ets sent by an Access P oint to synchronize a wireless networ k.
88 D-Link DAP-1350 User Manual Section 3 - Configuration Enable the Wi-Fi Protected Setup feature . Locking the wireless secur ity settings pre vents the set ting s from bein g chang ed b y the Wi- Fi Prot ecte d Setup f eature of the router . De vices can still be added to the network using Wi-Fi Protected Setup.
89 D-Link DAP-1350 User Manual Section 3 - Configuration This Wizard helps you add wireless de vices to the wireless network. The wizard will either displa y the wireless network settings to guide y ou through manual configuration, prompt you to enter the PIN f or the de vice, or ask you to press the configuration button on the de vice.
90 D-Link DAP-1350 User Manual Section 3 - Configuration T o use the Univ ersal Plug and Pla y (UPnP ™ ) f eature clic k on Enabled . UPnP provides compatibility with networking equipment, software and peripherals .
91 D-Link DAP-1350 User Manual Section 3 - Configuration Guest Zone Check to enab le the Guest Zone f eature. Th e sch edu le of tim e wh en the Gues t Zone wil l be activ e. The schedule ma y be set to Alwa ys, wh ich wil l all ow th e partic ul ar service to alw a ys be enabled.
92 D-Link DAP-1350 User Manual Section 3 - Configuration DMZ Check this bo x to enab le DMZ. Enter the IP address of the computer you would like to open all por ts to . Y ou can select a computer from the Computer Name drop-do wn menu and clic k << to enter the computer name into the DMZ Host IP Address field.
93 D-Link DAP-1350 User Manual Section 3 - Configuration Enter a new pass word for the Administrator Login Name. The administrator can mak e changes to the settings. Enter the ne w pass word for the User login. If y ou login as the User , you can only see the settings , but cannot change them.
94 D-Link DAP-1350 User Manual Section 3 - Configuration T ime Settings Select the Time Zone from the drop-down menu. T o select Daylight Saving time man ually , select enabled or disabled, and enter a star t date and an end date f or daylight sa ving time.
95 D-Link DAP-1350 User Manual Section 3 - Configuration SysLog The Broadband Router k eeps a r unning log of e vents and activities occurring on the Router . Y ou ma y send these logs to a SysLog ser v er on your network. Enable Logging to SysLog Server: SysLog Server IP Address: Check this bo x to send the router logs to a SysLog Ser v er .
96 D-Link DAP-1350 User Manual Section 3 - Configuration Use this option to sav e the current router configuration settings to a file on the hard disk of the computer you are using. First, clic k the Save button. Y ou will then see a file dialog, where y ou can select a location and file name f or the settings.
97 D-Link DAP-1350 User Manual Section 3 - Configuration Cl ic k on Ch ec k On li ne No w f or La tes t Fir mwa re V er sio n to fin d out if the re is an up dat ed firmw ar e; if so , download the new fir mware to y our hard drive .
98 D-Link DAP-1350 User Manual Section 3 - Configuration Enter a name f or your ne w schedule. Select a day , a range of da ys, or All W eek to include e ver y da y . Check All Day - 24hrs or enter a star t and end time f or your schedule. Click Save to sav e your schedule.
99 D-Link DAP-1350 User Manual Section 3 - Configuration This page displa ys the current information for the D AP-1350. It will displa y the LAN, W AN (Inter net), and Wireless inf or mation. If y our Inter net connection is set up f or a Dynamic IP address then a Release b utton and a Renew b utton will be display ed.
100 D-Link DAP-1350 User Manual Section 3 - Configuration The wireless client table displa ys a list of current connected wireless clients. This table also displa ys the connection rate and MA C address of the connected wireless clients.
101 D-Link DAP-1350 User Manual Section 3 - Configuration Logs Log Options: First Page: Last Page: Previous: Next: Clear: Log Settings: Refresh: Save Log: Y ou can select the types of messages that you want to displa y from the log: System Activity , Debug Inf ormation , Attacks , Dropped P ackets , and Notice .
102 D-Link DAP-1350 User Manual Section 3 - Configuration Statistics T h e s c r e e n be lo w d i s p l a ys t he T r af fic S ta ti st ic s . H e r e y ou c an v ie w th e am ou nt o f pa c k et s th at p as s th ro ug h t h e D A P - 1 3 5 0 on the Inter net, wireless , and the LAN por ts.
103 D-Link DAP-1350 User Manual Section 3 - Configuration Internet Sessions The Inter net Sessions page displa ys full details of activ e Inter net sessions through your router . An Inter net session is a con v ersation between a program or application on a LAN-side computer and a progr am or application on a W AN-side computer .
104 D-Link DAP-1350 User Manual Section 3 - Configuration Dir: Priority: Time Out: The direction of initiation of the conv ersation: Out - Initiated from LAN to W AN. In - Initiated from W AN to LAN. The pref erence given to outbound pac kets of this con versation b y the QoS Engine logic.
105 D-Link DAP-1350 User Manual Section 3 - Configuration Help.
106 D-Link DAP-1350 User Manual Section 4 - Security Wireless Security This section will show y ou the diff erent lev els of security you can use to protect y our data from intr uders.
107 D-Link DAP-1350 User Manual Section 4 - Security What is WP A? WP A, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improv e the secur ity f eatures of WEP (Wired Equiv alent Pr iv acy). The 2 major improv ements ov er WEP: • Improv ed data encr yption through the T emporal K ey Integrity Protocol (TKIP).
108 D-Link DAP-1350 User Manual Section 4 - Security Configure WEP It is recommended to enab le encr yption on y our wireless access point bef ore y our wireless network adapters. Please estab lish wireless connectivity bef ore enabling encr yption. Y our wireless signal may degrade when enabling encr yption due to the added ov erhead.
109 D-Link DAP-1350 User Manual Section 4 - Security Configure WP A/WP A2 Personal It is recommended to enab le encr yption on y our wireless access point bef ore y our wireless network adapters. Please estab lish wireless connectivity bef ore enabling encr yption.
110 D-Link DAP-1350 User Manual Section 4 - Security It is recommended to enab le encr yption on y our wireless access point bef ore y our wireless network adapters. Please estab lish wireless connectivity bef ore enabling encr yption. Y our wireless signal may degrade when enabling encr yption due to the added ov erhead.
111 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Connect to a Wireless Network Using Windows ® XP Windows ® XP users ma y use the built-in wireless utility (Zero Configuration Utility). The f ollowing instructions are for Ser vice P ac k 2 users.
112 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Configure WEP It is recommended to enab le WEP on y our wireless br idge or access point bef ore configuring y our wireless adapter . If y ou are joining an e xisting network, you will need to kno w the WEP k e y being used.
113 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network 3. The Wi re le ss Net wo rk Co nnec tion bo x will ap pe ar . Ent er the sa me WEP k e y that is on y our access point and clic k Connect. It ma y tak e 20-30 seconds to connect to the wireless network.
114 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Configure WP A-PSK It is recommended to enab le WEP on y our wireless br idge or access point bef ore configuring y our wireless adapter . If y ou are joining an e xisting network, you will need to kno w the WEP k e y being used.
115 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network 3. The Wireless Netw ork Connection box will appear . Enter the WP A-PSK passphrase and clic k Connect. It ma y tak e 20-30 seconds to connect to the wireless network. If the connection f ails, please v erify that the WP A-PSK settings are correct.
116 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Connect to a Wireless Network Using Windows Vista ® Windows Vista ® users ma y use the conv enient, built-in wireless utility . F ollow these instructions: F rom the Star t menu, go to Control P anel, and then clic k on Netw ork and Sharing Center .
117 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Clic k Connect An ywa y to continue . The utility will displa y the f ollowing window to indicate a connection is being made. The final windo w indicates the estab lishment of a successful connection.
118 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Clic k on a network (displa y ed using the SSID) using WEP under Select a network to connect to and then click the Connect b utton. Enter the appropriate secur ity k e y or passphrase in the field provided and then clic k the Connect button.
119 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Clic k on a netw or k (displa yed using the SSID) using WP A-PSK und er Sele ct a netw ork to conne ct to and the n cli c k the Con nect b utton. Enter the appropr iate secur ity ke y or passphr ase in the field provided and then clic k the Connect button.
120 D-Link DAP-1350 User Manual Section 6 - T roubleshooting T roubleshooting This chapter provides solutions to problems that can occur dur ing the installation and operation of the D AP-1350. Read the follo wing descr iptions if y ou are having problems .
121 D-Link DAP-1350 User Manual Section 6 - T roubleshooting • Configure y our Inter net settings: • Go to Start > Settings > Control P anel . Doub le-click the Internet Options Icon. F rom the Security tab , clic k the b utton to restore the settings to their def aults.
122 D-Link DAP-1350 User Manual Section 6 - T roubleshooting 3. Why can’t I connect to certain sites or send and receive emails when connecting thr ough m y poc ket r outer (r outer mode only)? If y.
123 D-Link DAP-1350 User Manual Section 6 - T roubleshooting Y ou should star t at 1472 and wor k y our wa y down by 10 each time. Once you get a reply , go up by 2 until you get a fragmented pack et. T ak e that v alue and add 28 to the value to account f or the v ar ious TCP/IP headers .
124 D-Link DAP-1350 User Manual Appendix A - Wireless Basics D-Link wireless products are based on industr y standards to pro vide easy-to-use and compatible high-speed wireless connectivity within your home , business or pub lic access wireless networ ks .
125 D-Link DAP-1350 User Manual Appendix A - Wireless Basics What is Wireless? Wireless or Wi-Fi technology is another wa y of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly , so you hav e the freedom to connect computers an ywhere in y our home or office.
126 D-Link DAP-1350 User Manual Appendix A - Wireless Basics Wireless P ersonal Area Netw ork (WP AN) Bluetooth is the industr y standard wireless technology used f or WP AN.
127 D-Link DAP-1350 User Manual Appendix A - Wireless Basics Where is wireless used? Wireless technology is expanding e ver ywhere not just at home or office. P eople like the freedom of mobility and it’ s becoming so popular that more and more pub lic f acilities now provide wireless access to attract people.
128 D-Link DAP-1350 User Manual Appendix A - Wireless Basics Security Don’t let your ne xt-door neighbors or intr uders connect to your wireless network. Secure your wireless network b y tur ning on the WP A or WEP security feature on the access point.
129 D-Link DAP-1350 User Manual Appendix B - Networking Basics Networking Basics Check your IP address After y ou install your new D-Link adapter , b y def ault, the TCP/IP settings should be set to obtain an IP address from a DHCP ser v er (i.e. wireless router) automatically .
130 D-Link DAP-1350 User Manual Appendix B - Networking Basics Statically Assign an IP address If y ou are not using a DHCP capab le gatew ay/access point, or you need to assign a static IP address, p.
131 D-Link DAP-1350 User Manual Appendix C - T echnical Specifications T echnical Specifications Standards • IEEE 802.11n • IEEE 802.11g • IEEE 802.
132 D-Link DAP-1350 User Manual Appendix D - Contacting T echnical Support Contacting T echnical Support U .S . and Canadian customers can contact D-Link technical suppor t through our web site or by phone . Bef ore you contact technical suppor t, please ha v e the follo wing ready: • Model number of the product (e .
133 D-Link DAP-1350 User Manual Appendix E - Warranty W arranty Subject to the ter ms and conditions set f or th herein, D-Link Systems, Inc. (“D-Link”) provides this Limited W arranty: • Only t.
134 D-Link DAP-1350 User Manual Appendix E - Warranty Limited Software W arranty: D-L ink wa rra nts that the sof twa re por ti on of the pro duct (“Sof twa re”) will su bst anti all y con fo r m .
135 D-Link DAP-1350 User Manual Appendix E - Warranty • After an RMA number is issued, the defectiv e product m ust be pac kaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA n umber m ust be prominently mar k ed on the outside of the pac kage.
136 D-Link DAP-1350 User Manual Appendix E - Warranty IF ANY IMPLIED W ARRANTY CANNO T BE DISCLAIMED IN ANY TERRIT OR Y WHERE A PRODUCT IS SOLD , THE DURA TION OF SUCH IMPLI ED W ARRANTY SHALL BE LIMITED T O THE DURA TION OF THE APPLICA BLE W ARRANT Y PERIOD SET FOR TH ABO VE.
137 D-Link DAP-1350 User Manual Appendix E - Warranty CE Mark W arning: This is a Class B product. In a domestic environment, this product ma y cause radio interf erence, in which case the user ma y be required to take adequate measures .
138 D-Link DAP-1350 User Manual Appendix E - Warranty Industry Canada Statement This de vice complies with RSS-210 of the Industr y Canada Rules. Operation is subject to the follo wing two conditions:.
139 D-Link DAP-1350 User Manual Appendix F - Registration V ersion 1.0 Nov ember 3, 2009 Product registr ation is entirely v oluntar y and failure to complete or retur n this f or m will not diminish y our warr anty rights.
An important point after buying a device D-Link DAP-1350 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought D-Link DAP-1350 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data D-Link DAP-1350 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, D-Link DAP-1350 you will learn all the available features of the product, as well as information on its operation. The information that you get D-Link DAP-1350 will certainly help you make a decision on the purchase.
If you already are a holder of D-Link DAP-1350, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime D-Link DAP-1350.
However, one of the most important roles played by the user manual is to help in solving problems with D-Link DAP-1350. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device D-Link DAP-1350 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
