






Section 1 - Product Overview
Package Contents
D-Link DHP-W306AV Powerline AV Wireless N Extender


CAT5 Ethernet Cable

Section 1 - Product Overview

Section 1 - Product Overview
The DHP-W306AV allows you to connect both wired and wireless computers, high-definition TVs, networking devices, and gaming consoles using the most pervasive medium in your home - the electrical wiring. Share Internet connections and experience smooth file transfers, streaming multimedia, online gaming and more. The Powerline AV Wireless N Extender features easy plug-and-play installation and can be connected to any Ethernet-enabled device.
The Powerline AV Wireless N Extender incorporates the latest technology to deliver up to 200 Mbps over a home’s existing electrical wiring. This fast transmission speed provides ample bandwidth suitable for streaming high-quality video HDTV signals while simultaneously providing high-speed Internet access throughout the home. With Quality of Service (QoS) support, the performance of applications which require real-time communication, such as VoIP phone calls and multiplayer online games, will not be compromised even while streaming Internet TV and music.

Section 1 - Product Overview
DATA TRANSMISSION OVER ELECTRICAL Wiring The D-Link DHP-W306AV Powerline AV Wireless N Extender, compliant with the Powerline AV standard, uses your home’s existing electrical wiring to create a network or extend your existing network.1 It turns every power outlet into a possible network connection to access digital media devices, game consoles, print servers, computers, and network storage devices throughout your home. Additionally, Wireless N provides high speed transfers without the need for unsightly network cables.
Faster wireless speeds, wider operational range The Wireless N technology incorporated into the DHP-W306AV offers increased speed and range over standard 802.11g/b. Initial wireless setup can be accomplished quickly, thanks to a convenient WPS button atop the device. WEP, WPA, and WPA2 encryption keep your network traffic safe and secure.
IDEAL FOR BANDWIDTH-INTENSIVE APPLICATIONS The DHP-W306AV is capable of delivering data transfer rates of up to 200 Mbps.2 This rapid transmission speed makes it ideal for bandwidth-intensive applications, guaranteeing smooth HD video streaming, VoIP calls, and lag-free online gaming experiences. In addition, it prioritizes Internet traffic, ensuring that multimedia applications do not experience glitches while web surfing and downloads are in progress. This device provides ample network bandwidth, enabling digital home consumers to tap into existing electrical wiring for high-quality multimedia streaming.
CONVENIENT setup AND SECURE OPERATION The DHP-W306AV plugs directly into a power outlet, and does not require any additional cables. Extend your home network by connecting multiple devices in the farthest corners of your home via Ethernet cable or Wireless N. For convenient setup, wired or wireless encryption keys can be quickly configured with the push of a button on top of the device. The adapter implements 128‑bit AES data encryption to protect the network from unauthorized wiretapping. With hassle-free plug and play installation, the DHP-W306AV is an ideal solution to create a wall-to-wall home network.
1 Power outlets and electrical wiring must all be part of the same electrical system. Certain electrical conditions in your home, such as wiring condition and configuration, may affect the performance of this product. Additional D-Link Powerline AV adapters are required to add new devices to the network. A minimum of two D-Link Powerline AV Network Adapters are required to create a network. Connecting this product to a power strip with a surge protector may adversely affect the performance of this product. For best results, plug the adapter directly into a wall outlet.
2 Maximum throughput based on theoretical transmission PHY rate. Actual data throughput will vary. Network conditions and environmental factors, including volume of traffic and network overhead, may lower actual data throughput rate. Interference from devices that emit electrical noise, such as vacuum cleaners and hair dryers, may adversely affect the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer switch or a touch-sensitive on/off feature, shortwave radios, or other Powerline devices that do not follow the HomePlug standard.

Section 1 - Product Overview
Connections



ON / OFF button Turns the device on or off.


RJ-45 10/100BASE-TX Ethernet Port Connects to Digital Media Devices, PCs, Game Consoles, Network Storage Devices

Section 1 - Product Overview
Side





Encryption Button Push this button to establish a secure powerline network with other Powerline AV devices.
Reset Button Press and hold to reset the device back to the factory default settings.


WPS/Eny LED When enabling WPS, the light will blink during broadcast. Once connected, the LED will remain lit 5 seconds and then will turn off. The LED will start blinking after the Encryption button is pushed. The LED will turn off once the Powerline AV is connected to a Powerline network.


WPS Button Press to start the WPS process. You will have 120 seconds to start the WPS process on another wireless device.

Section 1 - Product Overview
LEDs



Power LED A solid light indicates a proper connection to the power supply.




Ethernet LED A solid light indicates a connection to an Ethernet-enabled device. This LED blinks during data transmission.
Powerline AV LED A solid light indicates that a powerline connection is established. The LED will blink quickly when data is transmitted to or from another Powerline unit.


Wireless LED A solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission.

Section 2 - Installation
Connecting the Powerline AV Adapter
It is easy to connect the DHP-W306AV simply by performing the following instructions:



Section 2 - Installation
The D-Link wireless access point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

Section 2 - Installation
Encryption Button Usage
The Eny Button is used to add a Powerline AV device to a Powerline network. You can allow the DHP-W306AV to join a network by pressing the Eny Button to toggle it to the Broadcast state or Join state.
The Eny Button has 3 different trigger states:
Broadcast state - Enables the DHP-W306AV to provide information for another Powerline AV device
to join its Powerline network (works even if it is the only device existing within the network group). The first Powerline device will use this state when the Eny Button is pressed.
Join state - This allows an ungrouped Powerline AV device to join an existing Powerline network.
Powerline devices added after the first device will be in the Join State when the Eny Button is pressed.
Ungroup state - Hold down the Eny Button for more than 10 seconds to detach the device from its
network group.

Section 2 - Installation
Connecting two Powerline AV devices for the first time
To initially connect the DHP-W306AV to another Powerline AV device and create a network:
To add a DHP-W306AV if you already have an existing network with 2 or more Powerline devices:

PLC Settings
This section will show you how to configure your new D-Link Powerline AV using the web-based configuration utility.


Network Name:
You can set the name of your network and to make it either public or private. Make sure the Network Name of all of the devices within your Powerline network is the same.

Select this option if you would like to make your powerline network public with the default Network Name of “HomePlugAV”. Since this is a commonly used Network Name, it is less secure than a private Network Name.
Name:
Select this option if you wish to make your powerline network more secure by using a private Network Name. Type the name of your private Powerline network in the field.
Name:
Add Member:
This section lets you add new Powerline AV devices to your Powerline network. To add a new device, give it a Device Name and enter its Password, then click Add. When you add a device it is given the current Network Name.
Scan:
Scan for new Powerline devices.
Device Name:
Type a name you wish to use to identify a specific Powerline AV device. For example, “Jack’s room”.
MAC Address:
You can find the MAC address printed on the back of your device.
Password:
The Password is used to verify that you are authorized to perform changes on a device. You can find the Password printed on the back of your device.
Public Network · Private Network

Member List:
This section provides information on the Powerline AV devices in your Powerline network, or any devices that were previously connected but it are currently disconnected.

Link Rate:
Displays the device’s current data rate in Mbps.
Status:
This field shows the status of the device. If the field displays the word Connect, then the device is connected to your Powerline network. If the field displays the word Disconnect, then the device has been added to the network but it is not ready. Please check its password and make sure the device is powered on.
QoS Setting:
You can configure your Powerline AV devices to give priority to powerline network traffic according to its unique MAC Address.

Connect an Ethernet cable from the Ethernet port on the DHP-W306AV to a computer for configuration.
If you wish to change the default settings or optimize the performance of the DHP-W306AV, you may use the web-based configuration utility.

To access the configuration utility, open a web browser such as Internet Explorer and enter either http://dlinkap or http://192.168.0.50 in the address field.
Type Admin as the User Name and then enter your password. Leave the password blank by default.

If you receive a “Page Cannot be Displayed” error, please refer to the Troubleshooting section on page 64 for assistance.

Click Launch Wireless Setup Wizard to configure your access point and skip to the next page.

To set up your wireless network, click Add Wireless Device With WPS and skip to page 24.
If you would like to enter your settings without running the wizard, click Wireless Setup on the left side and skip to page 26.

This Wizard is designed to assist you in configuring your DHP-W306AV as an access point.
Enter the Device Name of the AP and click Next to continue. This is the NetBIOS name for the AP. Changing the Device Name is recommended if there is more than one D-Link device within the same wireless network.

If you would like to change the admin account password, enter a new password and click Next. Changing the password is strongly recommended.


Select Auto as the configuration method only if your wireless device supports Wi-Fi Protected Setup (WPS). For Manual setup, skip to the next page.

Click Next to continue.
Click Save to save your network settings.

In order for your network settings to take effect the AP will reboot automatically.
When the device has finished rebooting the main screen will be displayed.

Select Manual as the configuration method to set up your network manually.

Click Next to continue.
Enter a name for your wireless network (SSID).

Select Automatically assign a network key to have the access point generate a key for you to enter on your wireless clients. If you would like to enter your own key, select Manually assign a network key.
To use WPA security, check the use WPA encryption instead of WEP box. If left unchecked, WEP encryption will be used.
Click Next to continue.
If you selected Manually assign a network key as the configuration method, enter your network key. This key must be entered on your wireless clients.

For WEP encryption, enter a Network Key exactly 5 or 13 characters long or exactly 10 or 26 characters using 0-9 and A-F.
Click Next to continue.

The following screen will display you the network key to enter on your wireless clients.

Click Save to finish the Setup Wizard.

This Wizard is designed to assist you with your wireless network setup. It will guide you through step-by-step instructions on how to set up your wireless network and how to make it secure.
Adding a Wireless Device Using the PIN Method

Select PIN to use your PIN number from your wireless device to connect to your network.
Click Connect to continue.
Start WPS on the wireless device you are adding to you wireless network to complete the setup.

Adding a Wireless Device Using the PBC Method

Select PBC to use Push Button Configuration in order to connect to your network.
Click Connect to continue.
Press the WPS Button on the wireless device that you are adding to your network to complete the setup.


Enable Wireless:
Check this box to enable the wireless function. If you would prefer not to use wireless, uncheck the box to disable all the wireless functions. You may also set up a specific time range (schedule). Select a schedule from the drop-down menu or click Add New Schedule to create a new schedule.

When you are browsing for available wireless networks, this is the name that will appear in the list (unless Visibility Status is set to Invisible, see below). This name is also referred to as the SSID. For security purposes, changing the default network name is highly recommended.
Name:
Enable Auto Channel Scan:
The Auto Channel Scan setting can be selected to allow the DHP-W306AV to select the channel with the least amount of interference (during boot-up).
Wireless Channel:
Indicates the channel setting for the DHP-W306AV. The channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.
802.11 Mode:
Select one of the following: 802.11n Only - Select if you are only using 802.11n wireless clients. Mixed 802.11n, 802.11g and 802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
Wireless Network

Channel Width:
Select the Channel Width: Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices. 20MHz - Select if you are not using any 802.11n wireless clients.
Transmission Rate:
Select the transmission rate. Best (automatic) is recommended for best performance.
Check the box if you do not want the SSID of your wireless network to be broadcasted by the DHP-W306AV. If checked, the SSID of the DHP-W306AV will not be seen by site survey utilities, so your wireless clients will have to know the SSID of your DHP-W306AV in order to connect to it.
Wireless:
Security Mode:
Refer to page 43 for more information regarding wireless security.
Enable:
Enables the Wi-Fi Protected Setup feature.
Lock Wireless Security Settings:
Locking the wireless security settings prevents the settings from being changed by any new external user using its PIN. Devices can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network settings with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager user.
Current PIN:
Shows the current value of the access point’s PIN.
Create a random number that is a valid PIN. This becomes the access point’s PIN. You can then copy this PIN to the user interface of the user.
Reset PIN to Default:
Restores the default PIN of the access point.
Reset to Unconfigured:
Resets Wi-Fi Protected Status to Not Configured. The Vista WPS icon will only be displayed when the Wi-Fi Protected status is Not Configured.
Enable Hidden · Generate New

This section will allow you to change the local network settings of the access point and to configure the DHCP settings.
Use the drop-down menu to select Dynamic IP (DHCP) to automatically obtain an IP address on the LAN/private network.

Type:
Device Name:
Enter the Device Name of the AP. Changing the Device Name is recommended if there is more than one D-Link device within the subnet.
LAN Connection

Select Static IP to manually enter the IP address, subnet mask, and default gateway addresses.
LAN Connection Type:
Select Static IP from the drop-down menu.

IP Address:
Enter the IP address of the access point. The default IP address is 192.168.0.50. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to return to the configuration utility.
Subnet Mask:
Enter the Subnet Mask.
Default Gateway:
Enter the Gateway. This is usually the LAN or internal IP address of your router.
Device Name:
Enter the Device Name of the AP. It is recommended that you change the Device Name if there is more than one D-Link device within the subnet. You can enter the device name of the AP into your web browser to access it instead of IP address for configuration. If you are using the device name to connect, make sure that your PC and your DHP-W306AV are on the same network.

Use MAC (Media Access Control) Filters to authorize wireless clients to access your network by their MAC addresses. When enabled, any client not on the MAC filter list will not be able to access your network.
Select Enable or Disable from the drop-down menu.

Filter:
MAC Address:
Enter the MAC address you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. Click Save Settings to activate and save.
MAC Filter List:
Displays the list of clients in the filter list.
MAC Address

Transmit Power:
Sets the transmit power of the antennas.

Beacon Period:
Beacons are packets sent by an access point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended.
DTIM Interval:
(Delivery Traffic Indication Message) 1 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.
RTS Threshold:
This value should remain at its default setting of 2346. If inconsistent data flow is a problem, only a minor modification should be made.
The fragmentation threshold, which is specified in bytes, determines whether packets will be fragmented. Packets exceeding the 2346 byte setting will be fragmented before transmission. 2346 is the default setting.
Threshold:
WMM Enable:
WMM is a Quality of Service (QoS) system for your wireless network. Enabling this feature will improve the quality of video and voice applications for your wireless clients.
Short GI:
Check this box to reduce the guard interval time therefore increasing the data capacity. However, this setting less reliable and may create higher data loss.
IGMP Snooping:
Select this checkbox to enable IGMP snooping. IGMP snooping is a layer 2 feature which enables the device to learn Multicast group membership based on IGMP messages passing through the built-in switch. Because the switch learns the IGMP messages and knows which clients are involved in the multicast group membership, it is able to forward multicast traffic only to the ports that requested for it (based on their membership).
WLAN Partition:
Select this checkbox to enable WLAN partition. If this feature is enabled, then there is no barrier between communication among wireless stations connecting to the Access Point. If this is disabled, wireless clients are not allowed to exchange data through the Access Point.
Fragmentation

Enter the maximum number of wireless clients that can connect at one time to your access point.
Check the Enable User Limit box to enable this feature.

Limit:
User Limit:
Enter the maximum number of clients, between 1 and 32.
Save Settings:
Click Save Settings to save and activate the new changes.
Enable User

This page will allow you to change the Administrator password. The administrator password has read/write access.
Password:
Enter a new password for the Admin User Name. The administrator account can change the configuration of the device.

Verify Password:
Enter the same password that you entered in the previous textbox in order to confirm its accuracy.
Enable Graphical Authentication:
Enables a challenge-response test which will require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your device’s configuration. This feature is disabled by default.

Use this option to save the current access point configuration settings to a file on the computer you are using. Click the Save button. You will then see a file dialog where you can select a location and file name for the settings.

Hard Drive:
Use this option to load previously saved access point configuration settings. Click Browse to find a previously saved configuration file. Then, click the Upload Settings button to transfer those settings to the access point.
Hard Drive:
This option will restore all configuration settings back to the settings that were in effect at the time the access point was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you would like to save the current access point configuration settings, use the Save button above.
Default:
Reboot the Device:
Click to reboot the access point.
Save to Local · Upload from Local · Restore to Factory

You can upgrade the firmware of the access point from this page. Make sure the firmware you would like to use is on the local hard drive of your computer. Click Browse... to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site.
Firmware Information:
Click on the Check Now button to find out if there is an updated firmware or language pack version. If a new version exists, download the new firmware to your hard drive.

After you have downloaded the new firmware, click Browse to locate the firmware update on your hard drive. Click Upload to complete the firmware upgrade.
Upgrade:
To upgrade the language pack, follow these steps:
Upgrade:
Firmware · Language Pack

The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in. Daylight Saving can also be configured to automatically adjust the time when needed.
Time Zone:
Select the Time Zone from the drop-down menu.

Daylight Saving:
To select Daylight Saving time manually, click the Enable Daylight Saving check box. Next use the drop-down menu to select a Daylight Saving Offset and then enter a start date and an end date for daylight saving time.
Enable NTP Server:
NTP is short for Network Time Protocol. NTP synchronizes computer clock times in a network of computers. Check this box to use a NTP server. This will only connect to a server on the Internet, not a local server.
NTP Server Used:
Enter the NTP server or select one from the drop-down menu.
Date and Time:
To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Save Settings. You can also click the Copy Your Computer’s Time Settings button at the bottom of the screen.

Schedules can be created for use with enforcing rules. For example, if you would like to restrict web access to Mon- Fri from 3:00 p.m. to 8:00 p.m., you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3:00 p.m. and End Time of 8:00 p.m.
Name:
Enter a name for your new schedule.

Days:
Select a day, a range of days, or All Week to include every day.
Time:
Check All Days or enter a start and end time for your schedule.
Add:
After making your changes, click Save to save the schedule rule.
The list of schedules will be listed here. Click the Edit icon to make changes or click the Delete icon to remove the schedule.
List:
Schedule Rules

This page displays the current information for the DHP-W306AV. It will display the LAN and wireless LAN information.
General:
Displays the access point’s time and firmware version.

Displays the MAC address and the private (local) IP settings for the access point.
Wireless LAN:
Displays the wireless MAC address and your wireless settings such as SSID and Channel.

The DHP-W306AV keeps a running log of events and activities occurring on the AP. If the AP is rebooted, the logs are automatically cleared. You can save the log files under Log Settings.
Log Options:
You can select the types of messages that you would like to display from the log: System Activity, Debug Information, Attacks, Dropped Packets, and Notice. Select the types you want to view and click Apply Log Settings Now.

First Page:
This button directs you to the first page of the log.
Last Page:
This button directs you to the last page of the log.
Previous:
This button directs you to the previous page of the log.
Next:
This button directs you to the next page of the log.
Clear:
This button clears all current log content.
Log Settings:
This button opens a new menu where you can configure the log settings.
Refresh:
This button refreshes the log.

The DHP-W306AV keeps statistics of the traffic that passes through it. You can view the amount of packets that pass through the LAN and wireless portions of the network. The traffic counter will reset if the access point is rebooted.


The wireless section allows you to view the wireless clients that are connected to your wireless access point.
Connection Time:
Displays the amount of time the wireless client has been connected to the access point.

MAC Address:
Displays the Ethernet ID (MAC address) of the wireless client.



Section 4 - Security
This section will show you the different levels of security you can use to protect your data from intruders. The DHP-W306AV offers the following types of security:
WEP stands for Wired Equivalent Privacy. It is based on the IEEE 802.11 standard and uses the RC4 encryption algorithm. WEP provides security by encrypting data over your wireless network so that it is protected as it is transmitted from one wireless device to another.
To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you must determine the level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64-bit encryption. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange – alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX for use over the network. Four keys can be defined so that you can change keys easily.

Section 4 - Security
WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).
The 2 major improvements over WEP:
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless bridge or access point.
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network.

Section 4 - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.

ASCII - All numbers and letters are valid.

Section 4 - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.


Section 4 - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.


Section 5 - Connecting to a Wireless Network
Using Windows ® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.


Wireless Icon

Section 5 - Connecting to a Wireless Network

If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.


Section 5 - Connecting to a Wireless Network

It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.

Section 5 - Connecting to a Wireless Network
The WPS feature of the DHP-W306AV can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature of the DHP-W306AV:



Section 5 - Connecting to a Wireless Network



Section 5 - Connecting to a Wireless Network


Click Next to continue.

Section 5 - Connecting to a Wireless Network

Wait for the configuration to complete

Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future.

Section 5 - Connecting to a Wireless Network
Using Windows Vista ®
Windows Vista® users may use the convenient, built-in wireless utility. Follow these instructions:
From the Start menu, go to Control Panel, and then click on Network and Sharing Center.


The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) under Select a network to connect to and then click the Connect button.

Section 5 - Connecting to a Wireless Network
Click Connect Anyway to continue.

The utility will display the following window to indicate a connection is being made.

The final window indicates the establishment of a successful connection.

The next two pages display the windows used to connect to either a WEP or a WPA-PSK wireless network.

Section 5 - Connecting to a Wireless Network
It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used.
Click on a network (displayed using the SSID) using WEP under Select a network to connect to and then click the Connect button.

Enter the appropriate security key or passphrase in the field provided and then click the Connect button.


Section 5 - Connecting to a Wireless Network
It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used.
Click on a network (displayed using the SSID) using WPA-PSK under Select a network to connect to and then click the Connect button.

Enter the appropriate security key or passphrase in the field provided and then click the Connect button.


Section 5 - Connecting to a Wireless Network
Using Windows® XP Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.

If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility.

Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks.

The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.
If you get a good signal, but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.
or

Section 5 - Connecting to a Wireless Network
It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used.

Section 5 - Connecting to a Wireless Network

It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WEP settings are correct. The WEP key must be exactly the same as on the wireless access point.

Section 5 - Connecting to a Wireless Network
It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used.

Section 5 - Connecting to a Wireless Network
It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless access point.

Section 6 - Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DHP-W306AV. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples.)
When entering the IP address of the D-Link access point (192.168.0.50 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
- Microsoft Internet Explorer® 6.0 and higher - Mozilla Firefox 3.0 and higher - Google™ Chrome 2.0 and higher - Apple Safari 3.0 and higher

Section 6 - Troubleshooting
If you forgot your password, you must reset your access point. Unfortunately this process will change all your settings back to the factory defaults.
To reset the access point, locate the reset button (hole) on the rear panel of the unit. With the access point powered on, use a paperclip to hold the button down for 5 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is Admin and leave the password box empty.

Section 6 - Troubleshooting
This may due to the accidental change of the device password. Use the web-based configuration utility and select Setup > PLC SETTINGS. Fill in the password in the blank. Then repeat the same procedure to the other Powerline AV device via web-based configuration utility.
Please check your power supply is working. Powerline AV device operates from the power supplied by the home electrical wiring and can not operate without a working power supply.

Appendix A - Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Access point is a device used to provide this link.

Appendix A - Wireless Basics
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office. D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
How does wireless work? Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).
Wireless Local Area Network (WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues.
What is Wireless?

Appendix A - Wireless Basics
Who uses wireless? Wireless technology has become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it.

Appendix A - Wireless Basics
Where is wireless used? Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.
Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.
Here are a few things to keep in mind, when you install a wireless network.
Centralize your access point or Access Point Make sure you place the bridge/access point in a centralized location within your network for the best performance. Try to place the bridge/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.
Eliminate Interference Place home appliances such as cordless telephones, microwaves, wireless speakers, and televisions as far away as possible from the bridge/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency.

Appendix A - Wireless Basics
Security Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA, WPA2, or WEP security feature on the access point. Refer to product manual for detail information on how to set it up.
There are basically two modes of networking:
An Infrastructure network contains an Access Point or wireless bridge. All the wireless devices, or clients, will connect to the wireless bridge or access point.
An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate.

Appendix B - Networking Basics
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows Vista® users type cmd in the Start Search box.)

At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your access point. Some firewall software programs may block a DHCP request on newly installed adapters.
If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings.

Appendix B - Networking Basics
If you are not using a DHCP capable gateway/access point, or you need to assign a static IP address, please follow the steps below:
Step 1 Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Windows® XP - Click on Start > Control Panel > Network Connections. Windows® 2000 - From the desktop, right-click My Network Places > Properties.
Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3 Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.

Example: If the AP’s LAN IP address is 192.168.0.50, make your IP address 192.168.0.X where X is a number between 2 and 99 (excluding the number 50). Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5 Click OK twice to save your settings.

Appendix C - Technical Specifications
OPERATING HUMIDITY
SECURITY
POWERLINE INTERFACE
POWER INPUT
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.