Instruction/ maintenance manual of the product S860G Creda
Go to page of 16
Instructions for Installation and Use Gas Hob Model S860G.
2 CONTENTS Introduction For Your Safety Know your Hob How to use your Hob Practical Advice Care and Cleaning Troubleshooting Installation Electrical Connection Characteristics of Burners and Nozzels K.
3 Your new hob is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been installed in accordance with the installation instructions detailed in this booklet. To help make best use of your cooking equipment, please read this booklet carefully.
4 For Your Safety ALWAYS: - make sure you remove all packaging and dispose of safely. - check the soundness of the appliance after it has been unpacked. - make sure you understand the controls before using the appliance. - keep children away from the appliance during use.
5 How To Use Your Hob Know your Hob The position of the corresponding gas burner is indicated on each control knob. The burners differ in size and power.
6 Practical Advise on Using the Burners F or best perf ormance, f ollow these gener al guidelines: • Use the appropriate cookware f or each burner (see table) in order to pre v ent the flame from re.
7 Care and Cleaning Before cleaning or performing maintenance on your hob, disconnect it from the power supply. To extend the life of the hob, it should be cleaned carefully and thoroughly on a freque.
8 Installation The following instructions are intended for the installer so that the installation and maintenance procedures may be followed in the most professional and expert manner possible. Important: Disconnect the appliance from the electrical suppl y before performing any maintenance or repair.
9 Gas Connection for the Hob The hob should be connected to the gas supply by an authorized installer. During installation of this product it is essential to fit an approved gas tap to isolate the supply from the appliance for the convenience of any subsequent removal or servicing.
10 Adapting the Hob for Diff erent T ypes of Gas T o adapt the hob to a diff erent type of gas than that for which it was designed, (see the sticker under the hob or on the packaging), the burner nozzles must be changed, as follows: • Remove the pan supports and slide the burners out of the cooktop .
11 Electrical Connection Electrical connection WARNING: THIS APPLIANCE MUST BE EARTHED. The hob is designed to work with alternating current, the supply voltage and frequency indicated on the rating plate (situated under the hob). Make sure that the local supply voltage corresponds to the voltage indicated on the rating plate.
12 Characteristic of the burners and nozzles Ta b l e 1 Liquid Gas Natural Gas Burner Di ameter (mm) Ther mal pow er kW (p.c .s.*) By-Pas s 1/100 No zz le 1/100 Flow* g/h Nozzle 1/100 Flow* l/h Nomin .
13 Notes.
14 Notes.
15 Notes.
Ma y 2003 P ar t no . FP162 - 01 Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and services we offer. Repair Service and Information Desk UK: 08709 066 066 (Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays) www.
An important point after buying a device Creda S860G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Creda S860G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Creda S860G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Creda S860G you will learn all the available features of the product, as well as information on its operation. The information that you get Creda S860G will certainly help you make a decision on the purchase.
If you already are a holder of Creda S860G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Creda S860G.
However, one of the most important roles played by the user manual is to help in solving problems with Creda S860G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Creda S860G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
