Instruction/ maintenance manual of the product 9992-449 Coleman
Go to page of 12
Liquid Pr opane Con ver sion Kit IMPORT ANT Read this document carefully bef ore attempting installation of this conv ersion kit. These instructions should be left with the consumer f or future ref erence.
Item No. Qty Description 1 9992-4421 1 Main Bur ner V alv e & Manif old Assembly (L.P .) 8350 2 47310103 1 Main Regulator Hose Assembly (L.P .) 3 08006001 1 Rear IR L.
T ools Needed: Phillips head scre wdr iv er 1/4" nut driv er * 9/16" wrench Adjustab le wrench Fig 4 Fig 1 Fig 2 Fig 3 Rear Heat Shield Screws Heat T ents Screws * sock et set with extension can also be used. Be sure gas supply is off , the knobs are in the off position and the grill is cool.
Fig 5 Fig 6 Side Screws (Repeat on left side) Screws under lip Fig 8 Fig 7 T abs 5. Remov e the scre ws from the bottom of the heat shield, holding the front heat shield in place. The screws are located under the bottom lip of the shield (Fig. 5). 6. Remov e the side heat shield scre ws located under the bottom lip of the heat shield.
Fig 10 Fig 14 Fig 9 Fig 11 Fig 13 Manif old Gas Inlet Fle x Line Fle x Line Fig 12 Manif old Screws 10. Disconnect the r ight side fle xline from the manif old using the adjustable wrench. This will free up the right side of the manifold (Fig. 9). 11.
Fig 15 Control Knob Stems Y ou are now ready to install the new LP manif old. 16. NO TE: New screws f or the bezels are inser ted into the new LP manif old at the factory . Remov e them bef ore proceeding with Step 17. 17. Place the new manif old into the gr ill body with the control knob stems going outward through control panel front (Fig.
Fig 17 Fig 18 Fig 19 Installing the L.P . regulator 28. Remov e the NG regulator from the main gas pipe using an adjustable wrench. The NG regulator is located on bottom of grill head (Fig. 17). Note: For the follo wing steps, the supplied pipe dope needs to be applied to all fittings before the fittings are attac hed.
Fig 20 Fig 21 Fig 22 Fig 23 Fig 24 Rear Screws Con ver ting the Rear Infrared Burner to LP 31. Remov e the four scre ws on the inside of the grill that hold the rear infrared co ver in place (Fig. 20). 32. Close the grill hood slowly . 33. Remov e the two scre ws from the back infr ared cov er , located on the back of the g rill (Fig.
Label the Grill 44. Apply conv ersion label 9992-462 on the gr ill, ne xt to the lighting instruction label (Fig. 25). Label Y our Grill Note: At the completion of the con version, a leak test should be performed on all fittings. See Use and Care manual f or leak testing procedure.
__________________________________________ __________________________________________ __________________________________________ __________________________________________ ____________________________.
__________________________________________ __________________________________________ __________________________________________ __________________________________________ ____________________________.
9992-449 (8/14/06) The Coleman Company , Inc. • 3600 Nor th Hydraulic Wichita, KS 67219 U .S.A. 1-800-356-3612 • TDD: 316-832-8707 www .coleman.com ©2006 The Coleman Company , Inc. All rights reser ved. Coleman® and are registered trademarks of The Coleman Company , Inc.
An important point after buying a device Coleman 9992-449 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Coleman 9992-449 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Coleman 9992-449 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Coleman 9992-449 you will learn all the available features of the product, as well as information on its operation. The information that you get Coleman 9992-449 will certainly help you make a decision on the purchase.
If you already are a holder of Coleman 9992-449, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Coleman 9992-449.
However, one of the most important roles played by the user manual is to help in solving problems with Coleman 9992-449. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Coleman 9992-449 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
