Instruction/ maintenance manual of the product WAN Interface Card Cable WIC-1DSU-T1 Cisco
Go to page of 4
Table of Contents WIC−1DSU−T1 WAN Interface Card Cable Specifications ..........................................................................1 Document ID: 46795 ..................................................................................
WIC−1DSU−T1 WAN Interface Card Cable Specifications Document ID: 46795 Introduction Prerequisites Requirements Components Used Conventions WIC−1DSU−T1 WAN Interface Card Cables LEDs Related Information Introduction This document provides the cable specifications for the WIC−1DSU−T1 WAN interface card.
3600 Series Routers, and it provides a cost−effective router−DSU/CSU combination with the following features: T1 or fractional T1 network interface • N X 64 kbps or N X 56 kbps non−channelized data rates (N = 1 to 24) • Standards−based, including ANSI T1.
another DSU/CSU. This LED is on during normal operation. Loopback button −− Push this button to put the WAN interface card into loopback mode. The service provider can send a signal to test the connection from your site to the central office switch.
An important point after buying a device Cisco WAN Interface Card Cable WIC-1DSU-T1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco WAN Interface Card Cable WIC-1DSU-T1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco WAN Interface Card Cable WIC-1DSU-T1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco WAN Interface Card Cable WIC-1DSU-T1 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco WAN Interface Card Cable WIC-1DSU-T1 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco WAN Interface Card Cable WIC-1DSU-T1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco WAN Interface Card Cable WIC-1DSU-T1.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco WAN Interface Card Cable WIC-1DSU-T1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco WAN Interface Card Cable WIC-1DSU-T1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
