Instruction/ maintenance manual of the product 826 Cisco Systems
Go to page of 16
Quick Start Guide Cisco 826 and Cisco SOHO 76 Router Cabling and Setup 1 Cisco One-Y ear Limited Hardware W arranty T erms 2 Overview 3 Pa rt s L i s t 4 V erify the PC Setup 5 Connect the Rou ter to .
2 1 Cisco One-Year Limited Hardware Warranty Terms There are special terms app licable to your hardware warranty and various services that y ou can use during the warranty period. Y our formal W arranty Statement, inc luding the w arranties and license ag reements applicable to Cisc o software, is a v ailable on Cisco.
3 Complete the information belo w , and keep it for reference. 2 Overview This document describes the basic pr ocess of cabling and configuring the Cisco 826 an d Cisco SOHO 76 rou ters. Y ou can access the most current Cisco documentation on the W orld Wide W eb at the following sites: • http://www .
4 5 Connect the Router to a PC Follow these steps to connect the Cisco 8 2 6 or Cisco SOHO 76 router t o a PC: Step 1 Connect the yellow Ethernet cable from the yellow Ethernet po rt on the back panel of the router to the Ethernet port on the computer , as shown in Figu re 1.
5 6 Connect the Router to a Hub Follow these steps to connect the Cisco 826 or Cisco SOHO 76 router to a hub: Step 1 Connect the yellow Ethernet cable from the yellow Ethernet po rt on the back panel of the router to the Ethernet port on the hub, as shown in Figure 2.
6 7 Connect an ADSL Line Follow these steps to connect an ADSL to th e ADSL over ISDN port on your router: Step 1 Connect the lavender ADSL cable to the lavender ADSL over ISDN port on the router , as shown in Figure 3. If you have microfilters or do not have telephone service on the ADSL lin e, use the laven der CAB-ADSL-RJ11 cable.
7 8 Connect the Power and Turn On the Router Follow these steps to connect pow er to the Cisco 826 or Cisco SOHO 76 router and turn it on: Step 1 Make sure the router power is off. Pr es s the power switch to standby ( ). Step 2 Connect the power supply cable to the 8-pin connector on the router , as shown in Figure 4.
8 9 Verify the Connections by Using the LEDs The following table describes the normal condition for LEDs and what to do if you observe an abnormal condition. For more information on all LEDs or to resolve problems, see the Cisco 826 and Cisco SOHO 76 Router Hardware Installation Guide .
9 10 Set Up the Router to Access the Network The Cisco Router W eb Setup (CR WS) software is already loaded on your router . If you purchased your router through an Internet service provider (ISP), it is possible that your router has already been configured for use at your site, and no addit ion al configuration is necessary .
10 11 Obtaining Documentation Cisco documentation and additiona l literature are available on Cisc o.com. Cisco a lso provides several ways to obtain technical assistance and other technical resources. These sections expl ain how to obtain technical informa tion from Cisco Systems.
11 13 Cisco Product Security Overview Cisco provides a free online S ecurity V ulnerability Policy porta l at this URL: http://www .cisco.com/en/US/products/products_security_vulnera bility_policy .html From this site, you can perform these tasks: • Report security vulnerabilities in Cisco products.
12 Note Use the Cisco Product Identifica tion (CPI) tool to locat e yo ur product serial number before submitting a web or phone request for service. Y ou can access the CPI tool from the Cisco T echnical Support W ebsite by clicking the To o l s & Resources lin k under Documentation & T ools.
13 • Packet magazine is the Cisc o Systems technical user magazine for maximizing Internet and networking investments. Ea ch quarter , Packet del ivers coverage of the latest industry trends , techn.
14.
15.
Corporate Headquarters Cisco Systems, Inc. 170 W est T asman Drive San Jose, CA 95134-1706 USA www .cisco.com T el: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 European Headquarters Cisco Systems International BV Haarlerb ergpark Haarlerbergw eg 13-19 1101 CH Amsterdam The Neth erlands www-europe.
An important point after buying a device Cisco Systems 826 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems 826 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems 826 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems 826 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems 826 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems 826, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems 826.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems 826. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems 826 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
