Instruction/ maintenance manual of the product 7915 Cisco Systems
Go to page of 26
P HONE G UIDE Cisco Unified IP Phone Expansion Module 7915 INCLUDING LICENSE AND W ARRANT Y 1 Introducing the Cisco Unified IP Phone Ex pansion Module 7915 2 Installing the Cisco Unified IP Phone Expa.
2 1 Introducing the Cisco Unified IP Phone Expansion Module 7915 The Cisco Unified IP Phone Expansion Module 7915 attaches to your Cisco Unified IP Phone 7962G, Cisco Unified IP Phone 7965G or Cisco Unified IP Phone 7975G, adding up to 24 extra line appearances or programmable buttons to your phone.
3 Before You Begin Before you begin installing your Cisco U nified IP Phone Expansion Module 7915, read each of these sections: • Package Contents, page 3 • Footstand Kits, page 3 • Additional E.
4 Additional Equipment Y ou also need the follow ing equipment. • Small flat head screwdriver — for use during the installation • Power supply unit — depending on how many Expansion Modules yo.
5 Installing and Using Your Expansion Module 7915 Read the following safety notices before installing or using your Expansion Module 7915: Warnin g IMPORT ANT SAFETY I NSTRUCTIONS This warning symbol means danger . Y ou are in a situation that could cause bodily injury .
6 Using an External Power Supply Read the following warnings before you use the Cisco certified external power supply wi th the Expansion Modu le 7915: Caution Only use the specified Cisco-approved power supply on this product. War n in g This product relies on the building's installation for short-circuit (over current) protection.
7 T o install the Cisco Unified IP Phone Expansion Module 7915, perform the following tasks. 1. Remove the Footstand from the Cisco Unified IP Phone . 2. Connect the Support Bar to the Cisco Unified IP Phone . 3. Connect the Expansion Module 7915 to the Sup port Bar .
8 Figur e 2 Removin g the F ootstand 63147 Step 1 Unplug the Cisco Unified IP Phone network and pow er connections. Step 2 Unplug the handset, and unplug the headset if one is attached to the phone. Step 3 T urn the Cisco U nified IP Phone over and lay it on a protected flat surface to prevent it from being scratched.
9 Connect the Support Bar to the Cisco Unified IP Phone Refer to Figure 3 and the steps that follow . Figur e 3 Connect ing the Support Bar 140969 140969 Step 1 Position the support bar on the back of the Cisco Unified IP Phone so that it fits flush with the phone.
10 Figur e 4 Connect ing the Expan sion Module to the Suppor t Bar 1 Open slots on the Cisco Unified IP Phone Expansion Module 7915 2 Hooks on the support bar 3 Thumbscrews Step 1 Position the phone so that the front of the phone is facing up.
11 Step 3 Insert the hooks into the slots and then rotate the top of the Cisco Unified IP Phone Expansion Module 7915 into the support bar so that it rests fl ush with the bar . Step 4 T ighten the thumbscrew on the back of th e Cisco Unified IP Phone Expansion Module 7915.
12 Step 3 Plug one end of the second interface cable into the AUX jack with the “out” icon underneath on the first Expansion Module (the one closest to the phone).
13 Step 1 Depending on how your Cisco Unified IP Phone is powered with one or two Expansion Modules, perform one of the following actions to connect the power supply: • Y our Cisco Unified IP Phone .
14 Connect the Footstand Step 1 Locate the three hooks on the footstand. Step 2 Position the hooks so that they align with the open slots on the support bar . Note There are four positions in each o f the three sets of open slots on the support ba r .
15 Figur e 7 Connect ing a Laptop Cable Lock 140967 140967 Step 1 Detach the cable lock door from the support bar . Step 2 Secure the security cable to a desktop. Step 3 Insert the lap top cable lock into t he security slot on the back of the phone, lock it, and remove the key .
16 3 Features of the Cisco Unified IP Phone Expansion Module 7915 The Cisco Unified IP Phone Expansion Module 7915 includes the following features. 1 2 187193 1 Phone screen —Displays the phone n umber , speed dial number (or name or other te xt label), phone service, phone feature or Privacy assigned to each button.
17 4 Using the Cisco Unified IP Phone Expansion Module 7915 The Expansion Module 7915 functions as a line appearance or programmable button module, allowing y ou to keep track of calls in progress, calls on hold, an d calls re quiring transfer , or to access phone serv ices.
18 Note If the Expansion Module 7915 buttons are configured as phone features, they can be performed from the Expansion Module. Refer to the phone g uide for your Cisco Unified IP Phone for instructions about using your phone.
19 Configuring the Buttons on Your Cisco Unified IP Phone Expansion Modu le 7915 Similar to your Cisco Unified IP Phone, yo u can configure speed dial numbers or program buttons to access phone services on the Cisco Unified IP Phone Expansion Module 7915.
20 If you are experiencing other di fficulties, contac t your system administrator . Buttons on the first Cisco Unified IP Phone Expansion Module 7915 are all amber . • V erify that the int erface cable between your Cisco Unified IP Phone and your Cisco Unified IP Phone Expansion Module 7915 is connected.
21 6 Technical Specifications for the Cisco Unified IP Phone Expansion Module 7915 This section provides the physical and operating environment specifications for the Cisco Unified IP Phone Ex pansion Module 7915, as well as the regu latory compliance information.
22 7 Where to Find More Information The following sections provide sources for obtaining additional documentation from Cisco Systems. Related Documentation The following documents provide additional info rmation.
23 Subscribe to the What’ s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your deskt op using a reader application. The RSS feeds are a free service a nd Cisco currently supports RSS version 2.
24 3. T o read transla ted and localized warranty informa tion about your product, follow these steps: a. Enter this part number in the W arranty Document Number field: 78-10747-01C0 b. Select the language in which you wo uld like to view the document.
25 Product model number Product serial number Maintenance contract number.
Americas Headquarters Cisco Syst ems, Inc. San Jose, CA Asia Pacific Headquarters Cisco Systems ( USA) Pte. Lt d. Singapore Europe Headquarters Cisco Sy stems In ternational BV Amsterdam, The Netherlands Cisco has more than 200 offices w o rldwide. A ddresse s, phone numbers, and fax numbers are listed on the Cisco W ebsite at www .
An important point after buying a device Cisco Systems 7915 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems 7915 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems 7915 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems 7915 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems 7915 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems 7915, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems 7915.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems 7915. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems 7915 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
