Instruction/ maintenance manual of the product 3 Cisco Systems
Go to page of 18
C HAPTER 3-1 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) 3 Initial Switch Router Configurations This chapter describes ho w to initially configure th e Layer 3 switch routers.
3-2 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco I OS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Using the Console and the Manag ement Ports Step 4 Po wer on the switch r outer .
3-3 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 In itial Switch Router Configurations Configuring the Ma nagement Port Xmodem or Ymodem protocols. The X modem and Ymodem protocols support di f ferent speeds of f ile transfers.
3-4 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco I OS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Configuring the Mana gement Port Y ou can configure the ma nagement port from an IP c o nnected network.
3-5 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 In itial Switch Router Configurations Configuring the Host Name Y ou can disp lay the configuratio n file when you are in pri vileged EXEC (enable) mode.
3-6 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco I OS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Using the Boot Flash .
3-7 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 In itial Switch Router Configurations Using the Boot Flash .
3-8 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco I OS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Using the Boot Flash .
3-9 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 In itial Switch Router Configurations Using the Boot Flash M emory SIMM Router# dir bootflash: Directory of bootflash:/ 1 -rw- 3173128 <no date> cat2948g-in-mz.
3-10 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco I OS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Using the Boot Flash.
3-11 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 In itial Switch Router Configurations Recovering a System .
3-12 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco I OS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Recovering a System .
3-13 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 In itial Switch Router Configurations Recovering a System .
3-14 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco I OS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Updating the System Image Updating the System Image This section prov ides minimal instruct ions for updatin g the system image on your Layer 3 switch router .
3-15 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 In itial Switch Router Configurations Updating the System .
3-16 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco I OS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Updating the System Image Verifying checksum... OK (0x799F) 3173128 bytes copied in 177.
3-17 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 In itial Switch Router Configurations Updating the System .
3-18 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco I OS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Updating the System Image Router> show version Cisco Internetwork Operating System Software IOS (tm) L3 Switch/Router Software (CAT2948G-IN-M), Version 12.
An important point after buying a device Cisco Systems 3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems 3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems 3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems 3 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems 3 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems 3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems 3.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems 3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems 3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
