Instruction/ maintenance manual of the product LightStream 1010 Cisco
Go to page of 12
CHAPTER Cabling and Configuring the CES Port Adapter Modules 8-1 8 Cab ling and Configur ing the CES P or t Adapter Modules This chapter describes cabling and configuration procedures for the LightStream 1010 asynchronous transfer mode (A TM) switch circuit emulation service (CES) T1 and E1 port adapter modules (P AMs).
8-2 LightStream 1010 ATM Switch PAM Installation Guide FCC Part 68 Notice FCC P ar t 68 Notice The port adapter , Model W AI-T1C-4RJ48 used in the A TM/LAN switch complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number .
Cabling and Configuring the CES Port Adapter Modules 8-3 Overview of the CES Port Adapter Modules This equipment uses USOC jacks as listed in T able 8-1: T able 8-1 USOC Jacks f or CES Port Adapter Mo.
8-4 LightStream 1010 ATM Switch PAM Installation Guide Overview of the CES Port Adapter Modules Figure 8-1 T ypical CES T1 or E1 P or t Adapter Module (UTP P ort Shown) Each of the ports on the P AM c.
Cabling and Configuring the CES Port Adapter Modules 8-5 Overview of the CES Port Adapter Modules CES T1 and E1 P AM F eatures The CES T1 and E1 P AMs provide the follo wing features: • 4-port T1 or.
8-6 LightStream 1010 ATM Switch PAM Installation Guide Overview of the CES Port Adapter Modules Figure 8-2 CES T1 and E1 P or t Adapter Module Applications The CES T1 or CES E1 P AM provides the follo.
Cabling and Configuring the CES Port Adapter Modules 8-7 Connecting the Interface Cables and Checking the LEDs Connecting the Interface Cables and Chec king the LEDs All CES interfaces are bidirectional. Y ou must use the appropriate CES interface cable to connect the CES BNC or twisted-pair P AM interface with an e xternal CES network.
8-8 LightStream 1010 ATM Switch PAM Installation Guide Connecting the Interface Cables and Checking the LEDs The CES P AM can support interfaces that connect to the follo wing physical layers: • E1 G.703 with HDB3 coding • E1 2.048 Mbps coaxial cable Connect the CES interface cables as sho wn in Figure 8-3.
Cabling and Configuring the CES Port Adapter Modules 8-9 Connecting the Interface Cables and Checking the LEDs Figure 8-3 CES T1 and E1 Connections and LEDs The LEDs for the CES T1 and CES E1 modules exhibit the illumination states sho wn in T able 8-2.
8-10 LightStream 1010 ATM Switch PAM Installation Guide Connecting the Interface Cables and Checking the LEDs T able 8-2 LED Illumination States of CES T1 or CES E1 P AMs T able 8-3 sho ws the possible status conditions of a CES T1or CES E1 port, as indicated by certain settings of associated port LEDs.
Cabling and Configuring the CES Port Adapter Modules 8-11 Configuring the Interfaces Configuring the Interfaces When the switch is po wered on initially without any pre vious configuration data, the A TM interfaces are automatically configured on the physical ports.
8-12 LightStream 1010 ATM Switch PAM Installation Guide Configuring the Interfaces The follo wing P AM types ha ve specific def aults assigned: CES T1 P AM: • Framing = ESF • Line coding = B8ZS .
An important point after buying a device Cisco LightStream 1010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco LightStream 1010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco LightStream 1010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco LightStream 1010 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco LightStream 1010 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco LightStream 1010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco LightStream 1010.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco LightStream 1010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco LightStream 1010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
