Instruction/ maintenance manual of the product CTA-100 Chief Manufacturing
Go to page of 9
INSTALLATION INSTRUCTIONS CHIEF MANUFACTURING INC. 8809-000022 (Rev. A) 1-800-582-6480 952-894-6280 FAX 952-894-6918 2004 Chief Manufacturing 8401 EAGLE CREEK PARKWAY, STE.
Installation Instructions CTA-100 2 CT A-100 SPECIFICA TIONS Table 1. CTA-100 Specifications Inside Dimensions Model W-Width Adj us tm en t H-Height Adj us tm en t Max Support Weight CTA-100 10-1/4” – 17-3/8” 1” – 5-3/4” 50 lbs (22.
Installation Instructions CTA-100 3 IMPORTANT WARNINGS and CAUTIONS! WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions.
Installation Instructions CTA-100 4 T OOLS REQUIRED FOR INST ALLA TION The tools required for installation are as follows: • Allen Wrench (supplied) NOTE: Other tools may be required depending on your method of installation. SHIPPING CONTENTS BEFORE PROCEEDING: Unpack the carton.
Installation Instructions CTA-100 5 INST ALLA TION INSTRUCTIONS STEP 1 Figure 2. Assemble Center Plates and Side Plates Figure 3. Attach Center Plates and Side Plates Assembling the Center Plates and Side Plates Assemble center plates and side plates, as follows: 1.
Installation Instructions CTA-100 6 STEP 2 Figure 4. Install Pads on Adjustment Plates Figure 5. Install Adjustment Plates Installing Pads on Adjustment Plates Install foam pads on adjustment plates, as follows: 1. Locate two foam pads (50) and two adjustment plates (40).
Installation Instructions CTA-100 7 STEP 3 Figure 6. Install Top Attachment Plate Figure 7. Connect CTA-100 to TV/Mount Installing Top Attachment Plate Install top attachment plate, as follows: 1.
Installation Instructions CTA-100 8 STEP 4 Figure 8. Make Adjustments to Unit Making Adjustments 1. Install your VCR/DVD into the CTA-100. 2. Adjust the side plates (30) and adjustment plates (40) as needed to secure your VCR/DVD safely in the CTA-100.
Installation Instructions CTA-100 9 STEP 5 (OPTIONAL) Figure 9. Install Second Attachment Plate Stacking Two Units Stack two units, as follows: 1. Locate the top attachment plate (10) for the second unit. CAUTION The stacked load cannot exceed 50lbs. (22.
An important point after buying a device Chief Manufacturing CTA-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chief Manufacturing CTA-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chief Manufacturing CTA-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chief Manufacturing CTA-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Chief Manufacturing CTA-100 will certainly help you make a decision on the purchase.
If you already are a holder of Chief Manufacturing CTA-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chief Manufacturing CTA-100.
However, one of the most important roles played by the user manual is to help in solving problems with Chief Manufacturing CTA-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chief Manufacturing CTA-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
