Instruction/ maintenance manual of the product W013 Charnwood
Go to page of 6
HEA VY DUTY ROUTER T ABLE W013 OPERA TING INSTRUCTIONS AND ASSEMBL Y MANUAL The Charnwood router table enables any portable router to be inverted and used as a stationary machine capable of producing many different types of joints and decorative finishes.
WARNING; When using electric tools, basic safety pre- cautions should be followed to reduce risk of fire, elec- tric shock, and personal injury, including the following: SAFETY INSTRUCTIONS 1) KEEP WORK AREA CLEAN - Cluttered areas and benches invite injuries.
ii) Attach the two vertical clamps (13) to the vertical clamp supports using washer M5 (22) and knob M5x10mm (21). iii) Attach the transparent plastic dust chute (15) using two roundhead screws M5x10mm (23) with Washers M5 (22).
ROUTER MOUNTING INSTRUCTIONS i) MAKE SURE THE ROUTER IS UNPLUGGED. Remove the face plate cover from the router ( If your router does not have a removable face plate cover, measure the spacing of the fixing holes in the face plate and then mark out the insert plate, keeping the cutter aperture as the centre).
BASIC OPERA TING INSTRUCTIONS 1) EDGING AND PROFILING One of the most common operations undertaken using a router is Edging or Profiling, i.e. running a shaped cutter along the edge of the workpiece. In many instances this is for decorative purposes but it can also be to make a joint or fitting such as a raised panel.
2) GROOVING Grooving and Trenching operations are often carried out to form joints such as slot dovetails or to make fittings such as draw runner grooves. SET THE CUTTER HEIGHT :- Fit the appropriate cutter into the router and set the plunge depth to give the desired cut.
An important point after buying a device Charnwood W013 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Charnwood W013 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Charnwood W013 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Charnwood W013 you will learn all the available features of the product, as well as information on its operation. The information that you get Charnwood W013 will certainly help you make a decision on the purchase.
If you already are a holder of Charnwood W013, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Charnwood W013.
However, one of the most important roles played by the user manual is to help in solving problems with Charnwood W013. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Charnwood W013 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
