Instruction/ maintenance manual of the product IR-4101 Channel Vision
Go to page of 2
Be sure the emitter is attached directly over the component’s IR receiver . T o locate the IR receiver , shine a flashlight into the unit and look for the sensor .
Drill a 3/4” . hole Push the IR receiver head through the hole. Push the IR receiver head through the hole in the tabletop mount. Mount the IR receiver to the TV or on a surface within line of sight of your remote control. Remove the backing from the tape and attach the IR receiver holster in the desired location.
An important point after buying a device Channel Vision IR-4101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Channel Vision IR-4101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Channel Vision IR-4101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Channel Vision IR-4101 you will learn all the available features of the product, as well as information on its operation. The information that you get Channel Vision IR-4101 will certainly help you make a decision on the purchase.
If you already are a holder of Channel Vision IR-4101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Channel Vision IR-4101.
However, one of the most important roles played by the user manual is to help in solving problems with Channel Vision IR-4101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Channel Vision IR-4101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
