Instruction/ maintenance manual of the product A10247 Carrier
Go to page of 10
In to the expe_ Owner's Manual NOTE TO INSTALLER: THIS MANUAL MUST BE LEFT WITH THE EQUIPMENT USER. USER: Please read all instructions in the manual and retain all manuals for future reference. @ Always Ask For At t A10247 Use of the A| IRI Certified TM Mark indicates a manuthcturer's participation in the program.
WELCOME TO TODAY'S GENERATION OF COMFORT Congratulations! Your new, higher efficiency gas furnace is a sound investment which will reward you and your fanfily with years of warm memories winter after winter. Not only is your new furnace energy efficient, it is also extremely reliable.
IMPORTANT FACTS (DO'S AND DON'TS) • DO: READ AND UNDERSTAND THIS MANUAL • DO: Have your furnace and vent system inspected annually by a qualified service technician. • DO: Inspect your filter monthly and clean or replace when needed. • DO: Provide adequate airflow to the furnace for efficient combustion and safe ventilation.
STARTING YOUR FURNACE Your furnace uses an automatic, hot surface ignition system to light the burners each time the thermostat signals the furnace to start. Follow these important safeguards: • Never attempt to manually light the burners with a match or other source of flame.
OR / A02267 Fig. 9 - Control Switch to ON 8. Replace the outer door. )i ii m- -,L- O 6 ® Fig. 10 - Furnace Door Replaced 9. Turn ON the electrical supply to the furnace. A10264 12. After about 17 seconds, the gas valve permits gas to flow to the main burners where it is ignited.
PERFORMING ROUTINE MAINTENANCE With proper maintenance and care, your furnace will operate econonfically and dependably. Instructions for basic maintenance are found on this and the following pages.
Fig. 16 - Slide Side Filter Out of Furnace A00227 Fig. 18 - Replace Side Filter Cabinet Door A06192 A00228 Fig. 17 - Slide Bottom Filter Out of Furnace 4. Inspect the filter. If torn, replace it. NOTE: If a washable filter has been replaced with: a. Factory specified disposable media filter -- Do not clean.
COMBUSTION AREA AND VENT SYSTEM UNIT OPERATION HAZARD Failure to follow this warning could result in personal iniury or death. For proper and safe operation the furnace needs air for combustion and ventilation.
In addition tothe type of routine maintenance you might be willing toperform, your furnace should be inspected regularly by a properly trained service technician, You should work with your dealer or s.
NOTE TO EQUIPMENT OWNER: For your convenience, please record the model and serial numbers of your new equipment in the spaces provided. This information, along with the installation data and dealer contact information will be helpful should your system require maintenance or service.
An important point after buying a device Carrier A10247 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Carrier A10247 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Carrier A10247 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Carrier A10247 you will learn all the available features of the product, as well as information on its operation. The information that you get Carrier A10247 will certainly help you make a decision on the purchase.
If you already are a holder of Carrier A10247, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Carrier A10247.
However, one of the most important roles played by the user manual is to help in solving problems with Carrier A10247. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Carrier A10247 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center