

Back On Your Network After A Router Or Network Change

Please complete the following steps to apply the new configuration settings to your multifunction.

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network.




An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported.
Be sure to prepare an access point.

Before you continue, please gather the following information which will be required to connect your multifunction to your network. This information will be entered on the machine's operation panel.
If you do not know your Access Point/Network Name or your Network Key, use the following links for information on using our Canon PIXMA Wireless Setup Assistant.

Step Two
Press the Setup button (A)
Use the or button (B) to select Wireless LAN setup, then press the OK button


Step Four
Select Yes, then press the OK button.
Select Easy setup, and then press the OK button.
When wireless connection is enabled, the Wi-Fi lamp (D) lights blue.



Step Six
Select the access point name, then press the OK button.
Make sure that one of the screens, below, is displayed, then press the OK button..
If the following screen is not displayed, go to step 9



Step Eight
Enter the network key you wrote down, then press the left FUNCTION button (E). Press the center FUNCTION button (F) to switch character entry modes.
Make sure that the network key is correct, then press the left FUNCTION button. (below End setup)


Network key entry is case-sensitive. Be sure to enter upper and lower case letters correctly.

Your MX882 is now connected to your network
When the screen below appears, press the OK button.

If Failed to connect to the access point. appears, press the OK button, make sure that the network key is correct, then enter it again. If a connection still cannot be established, refer to the printed manual: Network Setup Troubleshooting.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.