EN
Canon logo
Official user manual

Canon PIXMA MP150

2 pages·1 MB·All in One Printer·PDF·ENDEFRITNLJA
Canon PIXMA MP150
Table of Contents 2 sections (A) · Step 3: Enter the name and password for an Administrator ShowHide
Page 1 of the Canon PIXMA MP150 user manual — (A)
Page 1 · click to enlarge
Page 1

2 Prepare the FINE Cartridges.

Thank you for purchasing the Canon PIXMA MP170/MP150. To prepare your machine for use, please follow these Easy Setup Instructions before referring to any other documentation.

Remove the protective tape.

1 Unpack the machine.

3 Insert the FINE Cartridges.

1 Carefully remove all items from the box. 2 Check the package contents.

  • See the flapped lid of the packing box. 3 Place the machine on a flat surface. 4 Remove all shipping tape and the protective sheet. 5 Open the Scanning Unit and remove the protective material (A).

(A)

  • Be sure to hold the machine by the side. Do not lift the machine by grasping the Paper Support Extension or the Operation Panel.

4 Close the Scanning Unit.

  • Lift the Scanning Unit to put the Scanning Unit Support back to its original position.

2 Connect the power cord.

1 Connect the power cord. 2 Press [ON/OFF] to turn ON the machine.

4 Load the paper.

1 Open the Paper Support (1) and pull up the Paper Support Extension (2) until it stops. 2 Load the paper with the print side face up.

3 Use [ ] or [ ] on the Operation Panel to select the language on the LCD, then press [OK]. (MP170)

  • Ensure the paper stack does not exceed the Load Limit Mark (A). 3 Pinch and adjust the Paper Guide (3) to the width of the stack. 4 Open the Paper Output Tray.
  • The language setting is only available for some countries.

3 Install the FINE Cartridge.

(A)

1 Lift the Scanning Unit and pull the Scanning Unit Support down into place.

The cartridge moves to the left.

Install the FINE Cartridges here.

The hardware setup is complete.

If you are connecting the machine to a computer for use, see the reverse side for instructions on installing the software.

© 2005 Canon Inc. All products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice.

QT7-0006-V03 xx2005A © CANON INC. 2005 PRINTED IN VIETNAM

Show 4 more labels / short text on this page
Do not touch! · (1) · (3) · (2)
Page 2 of the Canon PIXMA MP150 user manual — Step 3: Enter the name and password for an Administrator
Page 2 · click to enlarge
Page 2

Install the software.

The following software programs are included on the Setup CD-ROM:

Select Easy Install in order to install the application software, On-screen Manual and MP drivers. Select Custom Install in order to choose the options you would like to install. This sheet explains Easy Install only.

On-screen Manual MP Drivers MP Navigator

Easy-PhotoPrint ScanSoft OmniPage SE ArcSoft PhotoStudio

1. Turn ON the machine, and connect the USB cable.

The following software programs are included on the Setup CD-ROM:

On-screen Manual MP Drivers MP Navigator

2. Prepare the Setup CD-ROM.

Easy-PhotoPrint Easy-WebPrint ScanSoft OmniPage SE

1 Turn ON your computer, and start Mac OS X. 2 Insert the Setup CD-ROM into the CD-ROM drive. 3 Double-click [Setup] on the Setup CD-ROM, or click [Setup] on the Setup CD- ROM and click [File] menu and then select [Open].

  • IMPORTANT
  • Do not connect the USB cable until Step 4, “Connect the USB cable.”
  • Before installing the software in Windows XP or Windows 2000, you must log on as Administrator or a user with Administrator privileges.
  • If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstall this version before installing the new version. For instructions on uninstallation, see the guides for that version of the MultiPASS Suite.

Step 3: Enter the name and password for an Administrator

Account. 1 Enter the name for the Administrator. 2 Enter the password and then click [OK].

Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 1 · Step 3: Enter the name and password for an Administr…
1. Prepare the Setup CD-ROM and get ready to install.

1 Turn OFF the machine. 2 Turn ON your computer, and start Windows. 3 Insert the Setup CD-ROM into the CD-ROM drive.

  • The setup program should automatically run. If the setup program does not automatically run, click [My Computer], then double-click the CD-ROM icon.
4. Select the language and place of residence.
Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 2 · Step 3: Enter the name and password for an Administr…
  • In some countries, the [Select Language] and [Select Your Place of Residence] dialog boxes will not be displayed. Go to Step 5.

z Perform the following steps.

1 Select the language to use with this CD-ROM and then click [Next].

2 Select your place of residence and then click [Next].

1. Turn OFF the machine.
2. Disconnect the USB cable.
Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 3 · Step 3: Enter the name and password for an Administr…
Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 4 · Step 3: Enter the name and password for an Administr…
3. Click [Cancel].
2. Select the language and place of residence.
  • In some countries, the [Select Language] and [Select Your Place of Residence] dialog boxes will not be displayed. Go to Step 3 .
5. Install the software.

1 Select the language to use with this CD-ROM and then click [Next].

2 Select your place of residence and then click [Next].

1 Click [Easy Install], then click [Install].

Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 5 · Step 3: Enter the name and password for an Administr…
Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 6 · Step 3: Enter the name and password for an Administr…
  • To read descriptions of the software programs, set the mouse on the item.
Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 7 · Step 3: Enter the name and password for an Administr…
Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 8 · Step 3: Enter the name and password for an Administr…
3. Install the software.

1 Click [Easy Install], then click [Install].

2 Click [Yes].

3 Click [Restart] to restart your computer.

  • To read descriptions of the software programs, set the mouse on the item.
  • Installation begins. Follow the displayed instructions.
Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 9 · Step 3: Enter the name and password for an Administr…
Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 10 · Step 3: Enter the name and password for an Administr…
Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 11 · Step 3: Enter the name and password for an Administr…
Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 12 · Step 3: Enter the name and password for an Administr…

2 Read the License Agreement, then click [Yes]. • Installation begins. Follow the displayed instructions.

4. Connect the USB cable.

US only • When the Registration window appears, follow the on-screen instructions to ensure product support. The serial number is located inside the machine. (See “3 Install the FINE Cartridge.” on the reverse side of this sheet)

1 When the [Printer Connection] appears, connect the machine to the computer with the USB cable. 2 Turn ON the machine.

* When connecting from Mac OS X v.10.3.3 or earlier: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back ON again.

In Windows 2000, the machine may not be set as the default printer. 3 Click [Exit].

z Perform the following to make sure the driver has been installed correctly.

  • If prompted to, restart your computer.
Canon PIXMA MP150 — Step 3: Enter the name and password for an Administrator diagram (page 2)
Fig. 13 · Step 3: Enter the name and password for an Administr…
1. Select [Applications] from the [Go] menu.
2. Double-click the [Utilities] folder, then double-click the [Printer Setup Utility] ([Print Center] when using Mac OS X v.10.2.x) icon. If the printer is displayed in the [Printer List], the printer driver is installed. If the printer is not displayed in the [Printer List], click [Add] in the [Printer List] and select [USB] from the pop-up menu. Select your machine from the [Product] list and click [Add].

You now have completed installation of the software.

US only • When the Registration window appears, follow the on-screen instructions to ensure product support. The serial number is located inside the machine. (See “3 Install the FINE Cartridge.” on the reverse side of this sheet)

Show 14 more labels / short text on this page
ArcSoft PhotoStudio · Enter Click · Click · Click · Click · Click · Click · Click · Click · Click · Click · Click · Click · Click

Ask about the Canon PIXMA MP150

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Canon PIXMA MP150

Be the first to ask — other owners or our team will answer.

Original document

Canon PIXMA MP150 manual PDF

2 pages·1 MB·All in One Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…