Instruction/ maintenance manual of the product Console SMC Networks
Go to page of 7
Console Specifications CS – 0206VLII 4/4/2006 Page 1 of 7 Specifications (Vision Line II) - 1) Vision Line II General Description 1.1 For this point forward SMC sha ll be referred to as the console contractor.
Console Specifications CS – 0206VLII 4/4/2006 Page 2 of 7 a. Full Access (front and rear) where ever possible to house terminals and CPUs b. Air circulation throughout the entire installation c. Fully removable rear doors and front panels requiring no tools d.
Console Specifications CS – 0206VLII 4/4/2006 Page 3 of 7 4) Modular Pre-Engineered Construction All components within t he system shall be: 4.1 Of a pre-engineered modular construction, i.e.: constructed from a series of independent sectional compartments.
Console Specifications CS – 0206VLII 4/4/2006 Page 4 of 7 Frames are designed to allow for mount ing of accessories such as Flat Panel Monitor mounts utilizing slat wall that can be used along with monitor mounting on work surfaces.
Console Specifications CS – 0206VLII 4/4/2006 Page 5 of 7 Power Strip mounts and/or modular el ectrical power runs (electrical distribution option that brings in (4) – 20 amp or 15 amp circuits to the console) are made available in the frames cable management and again are accessible from either the front or rear of the cabinets.
Console Specifications CS – 0206VLII 4/4/2006 Page 6 of 7 7) Finish and Color 7.1 All exterior and frame steel co mponents including drawers, blank panels, and shelving shall be zinc ox ide wash primer with an enamel paint finish. Manufacturer offers a variety of 7 different baked, enamel finishes and 14 laminate colors.
Console Specifications CS – 0206VLII 4/4/2006 Page 7 of 7 10.1 The console contractor can prov ide inst allation, lab or, site supervision, support and service. 10.2 Modules shall be able to be assembl ed using standard tools. NO site cutting or drilling is required.
An important point after buying a device SMC Networks Console (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SMC Networks Console yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SMC Networks Console - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SMC Networks Console you will learn all the available features of the product, as well as information on its operation. The information that you get SMC Networks Console will certainly help you make a decision on the purchase.
If you already are a holder of SMC Networks Console, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SMC Networks Console.
However, one of the most important roles played by the user manual is to help in solving problems with SMC Networks Console. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SMC Networks Console along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
