Instruction/ maintenance manual of the product 3.M 2 AEG
Go to page of 4
Protect 3.M 2.0 Modular uPs systeM Uninterruptible Power Supply 3-Phase Input; 3-Phase Output 20 –120 kV A power supply Networks, workstations, intranet and internet servers, telecommunications applications and other company applications must be permanently available.
2 Functional buttons ON/OFF Front-EPO System status LEDs • Normal • Battery • Bypass • Error Power outages can lead to significant financial loss Almost all labor and production pr ocesses today are based on high capacity data and IT infrastructure.
3 Classification VFI SS 111 acc. to IEC 62040-3 Pro tec t 3.M 2.0 Po wer type rating 2 0 k VA 4 0 k VA 6 0 k VA 8 0 k VA 10 0 k VA 12 0 k VA 16 k W 32 k W 4 8 kW 6 4 k W 80 k W 96 k W SYSTEM Nominal input current 29 A 59 A 88 A 117 A 145 A 172 A Efficiency (typical) 95 % Efficiency in ECO mode 98 % Waste heat from power (typical) 1.
AEGPS - Protect 3.M 2.0 - EN - 01/2012 V1 - Due to our policy of continuous development, the data in this document is subject to change without notice. AEG is a registered trademark used under licence fr om AB Electrolux. AEG Power Solutions Approach your local AEG Power Solutions representative for further support.
An important point after buying a device AEG 3.M 2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG 3.M 2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG 3.M 2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG 3.M 2 you will learn all the available features of the product, as well as information on its operation. The information that you get AEG 3.M 2 will certainly help you make a decision on the purchase.
If you already are a holder of AEG 3.M 2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG 3.M 2.
However, one of the most important roles played by the user manual is to help in solving problems with AEG 3.M 2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG 3.M 2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
