Instruction/ maintenance manual of the product PCA-6185 Advantech
Go to page of 114
PCA-6185 Full-size socket 478 Intel® Pen- tium® 4 processor-based PCI-X bus CPU card User’s Manual.
PCA-6185 User’s Manual ii Copyright This document is copyrighted, 200 2, by Advantech Co., Ltd. All rights are reserved. Advantech Co ., Ltd. reserves the right to make improve- ments to the products descri bed in this manual at any time. Specifications are thus subject to change without notice.
iii A Message to the Customer Advantech customer services Each and every Advantech pro duct is built to the most exacting specifica- tions to ensure reliable performance in the harsh and demanding condition s typical of industrial environ ments.
PCA-6185 User’s Manual iv PCA-6185 series co mparison tab le PCA-6185F- 00A1 V V V 4 V V X V V PCA-6185G2- 00A1 V V V 4 V V X V X PCA-6185VG- 00A1 V V V 4 V V V X X PCA-6185V - 00A1 V V V 4 V V X X .
v Product warranty Advantech warrants to you, the original purchaser , that each of its prod- ucts will be free from defects in mate rials and workma nship for two years from the date of purchase.
PCA-6185 User’s Manual vi I ni t i a l In s p e c ti o n Before you begin installing your card, please make su re that the following materials have been shipped: •1 socket 478 Pentium 4® processo.
vii Contents Chapter 1 Hardware Co nfiguration ................................. 2 1.1 Introduction ............ ............................ ............ ........... ........ 2 1.2 Features ............. ......................... ....................
PPC-153 User’s Manual viii 2.5 VGA Connector (CN7) ................. .............. .................... 22 2.6 10/100/1000Base-T Ethernet (CN8 and CN34) .............. 23 2.7 Serial Ports (CN9: COM1; CN10: COM2) ..................... 23 2.8 PS/2 Keyboard and Mouse Co nnectors (CN11) .
ix Figure 3.7:Integrated peripherals ................. ........... ...... 39 3.6.1 IDE Funt ion Setup ................ ............ ........... ........... ...... 39 3.6.2 Super I/O Functi on Setup ..................... ........... ........... .. 40 3.
PPC-153 User’s Manual x 7.8 Using SCSI Disk Utilities . .......................... .............. ...... 77 7.9 Installation u nder Windows NT/Win dows 2000 ............. 77 7.10 Windows 2000 Driver set up procedure .......... ........... ...... 78 7.
CHAP TER 1 Hardware Configuration This chapter provides background information on the PCA-6185. It will show you how to configure the card to match your applica tion and prepare it for installation into your PC.
PCA-6185 User’s Manual 2 Chapter 1 Hardware Configuration 1.1 Introduction The PCA-6185 Series all -in-one indu strial grade single CPU card uses Intel's high performance Pentium® 4 processor , together with the Server- W orks' GC-SL chipset.
3 Chapter 1 1.2 Features 1. High performance PCI bus: The PCA-6185 provides three inde- pendent PCI buses: one 32-bit, 33 MHz PCI bus and two 64-b it PCI-X buses. The 32-bit bus is used for on-board VGA controller . One of the two high performance PCI-X bus is used for onb oard Gigabit Ethernet and SCSI controllers.
PCA-6185 User’s Manual 4 1.3 Specifications 1.3.1 System • CPU: Intel Pentium® 4 /Celeron processor with 512, 256 or 128 KB L2 cache, up to 3.06 GHz and above, FSB 400/533 MHz • BIOS: A w ard F.
5 Chapter 1 1.3.4 VGA interface • On-board PCI VGA controller • Controller: A TI 3D RAGE XL • Display memory: 8 MB SDRAM 1.3.5 Ethernet LAN • Chipset: Broadcom BCM5703 for single GbE and BCM57 04 for dual GbE. • Ethernet interface: 10/100/1000 Based - TX • Connection: Onboard RJ-45 connector 1.
PCA-6185 User’s Manual 6 1.4 Jumpers and Connectors Connectors on the PCA-6185 board link it to external devices such as hard disk drives and a keyboard. In addition, the board has a num ber of jumpers used to configure your system for your application.
7 Chapter 1 CN34 LAN2 CN35 System Fan CN40 PCI-X daughter board connector for SCSI & LAN CN50 Ultra 320 SCSI 1 CN51 Ultra 320 SCSI 2 T able 1.2: Connectors.
PCA-6185 User’s Manual 8 1.5 Board Layout: Jumper and Connector Locations Figure 1.1: Jumper and connecter locations.
9 Chapter 1 Figure 1.2: Daughter board layout Figure 1.3: Daughter bo ard extension I/Os 68 pin for Ultra 320 68 pin for Ultra 320 LAN1 LAN2 LAN 2 LAN 1 COM1 USB 0,1 VGA PS/2 mouse & keyboard.
PCA-6185 User’s Manual 10 Notes: Note1: Shall any inco mpatibility occur when using add-on car ds running at 66MHz PCI or 66 MHz PCI-X, please lower down the PCI bus frequency to 33MHz by setting jumpers on the backplane. Y ou can find how to set the jumpers on the User 's Note of th e backplane .
11 Chapter 1 1.6 Safety Precautions 1.7 Jumper Setti ngs This section provides i nstructions on how to confi gure your card by set- ting jumpers. It also includes the card's default settings and your optio ns for each jumper . 1.7.1 How to set jumpers Y ou configure yo ur card to match the needs of your applicat ion by setting jumpers.
PCA-6185 User’s Manual 12 closed for just a few seconds, and then move the jump er back to 1-2 closed. This procedure will reset the CMOS to its default setting.
13 Chapter 1 1.7.3 PCI bus type setting selection (JP1) The PCA-6185 CPU card co ntains a jump er that can set PCI bus type for 33/66 PCI bus or PCI-X, that's depending on add-on cards or backplane setting.
PCA-6185 User’s Manual 14 1.8 System Memory The top-left edge of the PCA-6185 contains three so ckets for 184-pin dual inline memory modules (DIMMs) . All these sockets accept only 2.5 V registered DDR SDRAM. Register ed DIMMs are available in capaci- ties of 128, 256, 512, 1024 or 2048 MB.
15 Chapter 1 automatically locked the memory mo dul e into the correct position of the DIMM socket. T o remov e the memory module, just push both handles outward, and the m emory module wi ll be ejected by the mechanism in the socket.
PCA-6185 User’s Manual 16 3. Press the lever down. The plate wi ll slide forward. Y ou will feel some resistance as the pressure starts to secure the CPU in the socket. This is normal and will not damage the CPU. 1.12 RAM Module Approval List 1.13 Gigabit LAN Ca rd Approval List Module V endor Module Part No.
17 Chapter 1 1.14 RAID Card Approval List Card V end or Card Part No. S pee d type. Adaptec SCSI RAID 3000S PCI64 bits / 66MHz (Dual channel / Ultra-160 ) Mylex AccleRAID 352 PCI64 bits / 66MHz (Dual .
PCA-6185 User’s Manual 18.
CHAPTER 2 Connecting Peripherals This chapter tells how to connect peripherals, sw itches, and indicators to the PCA-6185 board..
PCA-6185 User’s Manual 20 Chapter 2 Connecting Peripherals 2.1 Primary (CN1) and S econdary (CN2) IDE Connec- tors Y ou can attach up to four IDE (Integrated Drive Electronics) drives to the PCA-6185’ s built-in controller . The primary (CN1) and secondary (CN2) connectors can each accommodate two drives.
21 Chapter 2 2.2 Floppy Drive Connector (CN3) Y ou can attach up to two flo ppy disk drives to the PCA-6185's onboard connector . Y ou can use 3.5" (720 KB, 1.44/2.88 MB) drives. The card comes with a 34-pin daisy- chain drive connector cable.
PCA-6185 User’s Manual 22 plate. Next, attach the flat-cable connector to CN4 on the CPU card. W ire 1 of the cable is red or blue, and the other wires are gray . Make sure that wire 1 corresponds to pin 1 of CN4. Pin 1 is on the upper right side of CN4.
23 Chapter 2 2.6 10/100/1000Base-T Ethernet (CN8 and CN34) The PCA-6185 is equipped with one high -performance 64-bit PCI-bus Ethernet interface, which are fully co mpliant with IEEE 802.3/u 10/100/ 1000 Mbps CSMA/CD standards. They are supported by all major net- work operating syst ems.
PCA-6185 User’s Manual 24 2.8 PS/2 Keyboard a nd Mouse Connectors (CN1 1) The 6-pin mini-DIN connectors (CN11) on the card mounting bracket provides connection to a PS/2 keyboard and a PS/2 mouse, by usin g the adapter cable (P/N: 17000 60202, available from Adv antech.
25 Chapter 2 2.1 1 Front Panel Conn ectors (CN16, 17, 18, 19, 21&22) There are several external switches to monitor and control the PCA-6185. 2.1 1.1 Power LED (CN16) CN16 is a 5-pin connector for the p ower on LED. Refer to Appendix B for detailed information on the pi n assignments.
PCA-6185 User’s Manual 26 2.1 1.2 External speaker (CN17) CN17 is a 4-pin connector for an extenal speaker . If there is no external speaker , the PCA-6185 provides an onbo ard buzzer as an alternative. T o enable the buzzer , set pins 3-4 as closed 2.
27 Chapter 2 2.1 1.5 SM Bus Connector (CN29) This connector is reserved for Advantech's SNMP-1000 HTTP/SNMP Remote System Manager . The SNMP-1000 allows users to monitor the internal voltages, temperature and fans from a remote comp uter through an Ethernet networ k.
PCA-6185 User’s Manual 28 2.1 1.8 A TX feature connector (CN20) and sof t power switch connector (CN21) The PCA-6185 can support an advanced soft power switch function i f an A TX power supply is used. T o enable the soft power switch function: 1. Connect the 3-pin p lug of the cable to CN20 (A TX feature connec- tor).
CHAPTER 3 A ward BIOS Setup This chapter describes how to set the card’ s BIO S configuration data..
PCA-6185 User’s Manual 30 Chapter 3 A ward BIOS Setup 3.1 Introduction A ward’ s BIOS ROM has a bui lt-in setup program t hat allows users to modify the basic system configu ration. This type of inform ation is stored in battery-backed memory (CMOS RAM) so that it retains th e setup information when th e power is turned o ff.
31 Chapter 3 3.2 Entering Setup T urn on the computer and check for the “patch cod e”. If there is a number assigned to the patch code, it means that the BIO S supports your CPU. If there is no number assigned to the patch code, please contact Advan- tech’ s applications engineer to obtain an up-to -date patch code file.
PCA-6185 User’s Manual 32 3.3 St andard CMOS Setup Choose the “Standard CMOS Features” option from the “Initial Setup Screen” menu, and the screen below will be displayed. This menu allows users to configure system components such as dat e, time, hard disk driv e, floppy drive, display , and memory .
33 Chapter 3 3.4 Advanced BIOS Features The “Advanced BIOS Features” scr een appears when choosing the “Advanced BIOS Features” item from th e “Initial Setup Screen” menu. It allows the user to configure the PC A-6185 according to his particular requirements.
PCA-6185 User’s Manual 34 3.4.1 Boot Seq & Floppy Setup 3.4.1.1 Fi rst Boot/Second Boo t/T hird Boot/Oth er Boot Device Y ou can select the priority of yo ur boot devices. Choices are: Floppy , LS1 20, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3, ZIP100, USB-FDD, USB-ZIP , US B -CDROM, USB-HDD, LAN, Dis- abled.
35 Chapter 3 3.4.2 Console Redirection 3.4.2.1 C o nsole Redir ection When enabled, system will attempt to redirect console vi a COM port. When disabled, system will attempt to redirect console only when key- board is absent. The baud rate is selectable as 9600, 19 200, 38400, 57600, 115200 bps.
PCA-6185 User’s Manual 36 3.4.4 V irus W arning If enabled, a warning message and alarm beep activates if someone attempts to write here. The commands are “Enabled” or “Disabled.
37 Chapter 3 3.4.12 OS Select for DRAM > 64MB This setting allows selecting an OS with greater than 64MB of RAM. Commands are “Non-OS2” or “OS2.
PCA-6185 User’s Manual 38 3.5 Advanced Chip set Features By choosing the “Advanced Chipset Features” option from the “Initial Setup Screen” menu, the screen below will be displayed.
39 Chapter 3 3.5.3 Scrubbing The settings are Enabled and Disabl ed. Scrubbing writes correc ted EC C data back into memory . 3.6 Integrated Peripherals 3.6.1 IDE Funtion Setup 3.6.1.1 On -Chip Primary/Secondary PCI IDE Enable/Disable the primary an d secondary IDE HDD interface.
PCA-6185 User’s Manual 40 3.6.2 Super I/O Function Setup 3.6.2.1 Onboard FDC Contr oller When enabled, this field allo ws you to connect your floppy d isk drives to the onboard floppy disk drive connector instead of a separate controller card.
41 Chapter 3 3.6.3.2 USB Keyboard Support Select Enabled if your system contains a Universal Serial Bus (USB) con- troller and you have a USB keyboard. The choice: Enabled, Disabled. 3.6.4 PWRON Af ter PWR-Fail This field lets you to determine the state that your computer returns after a power failure.
PCA-6185 User’s Manual 42 This category allows you to select the type (or degree) of power saving and is directly related to the following mo des: 1. HDD Power Down 2. Suspend Mode There are four selections for Powe r Management, three of which have fixed mode setti ngs.
43 Chapter 3 3.7.4 V ideo Off In Suspend When you select “Y es”: V ideo will trun off when computer suspends. When you select “No”: V ideo will be on when computer suspends. 3.7.5 Sof t-Off by PWRBTN If you choose “Instant-Off”, then pushing the A TX soft power switch but- ton once will switch the system to “system off” power mode.
PCA-6185 User’s Manual 44 3.8.2 Reset Configuration Dat a Note: This is left “Disabled. ” Se lect “Enabl ed” to reset Extended System Configuration Data (ECSD) if you hav e installed a ne w add-on card and y our OS won’t bo ot and y ou need to reconfigure .
45 Chapter 3 3.9.2 Current System T emperature This shows you the current system temperature 3.9.3 Current CPU T emperature This shows you the current CPU speed. 3.9.4 Current CPU Fan/System Fan S peed This shows you the current CPU fan/System fan speed.
PCA-6185 User’s Manual 46 Enter the current passw or d and press <Enter>. 3. After pressing <Enter> (ROM password) or the current password (user-defined), you can change the password stored in the CMOS. The password must be no longer than eight (8) characters.
CHAPTER 4 PCI SVGA Setup The PCA-6185 features an onboard PCI VGA interface. This chapter pro- vides instructions for installing and operating the softwa re drivers on the display driver CD included in your package.
PCA-6185 User’s Manual 48 Chapter 4 PCI SVGA Setup 4.1 Before you begin T o facilitate th e installation of th e enhanced display device drivers and utility software, you shoul d read the instructions in this chapter carefully before you attempt installatio n.
49 Chapter 4 • Integrates superio r video features. These include filtered sealing of 720 pixel DVD content, and MPEG-2 motio n compensation for software DVD 4.3 VGA Inst allation First, insert CD drive. Then follow the Icons for your PCA Series model number .
PCA-6185 User’s Manual 50 In the license window , click on "Y es" to continue..
51 Chapter 4 Click on "Y es". The installaion is complete click on "Y es" to restart the system..
PCA-6185 User’s Manual 52.
CHAPTER 5 LAN Configuration The PCA-6185 features single or d ual 10/100/1000Base-T Eth ernet LAN interface. This chapter gives detailed information on Ethernet config uration. It shows you how to configure the card to match your app lication requirements.
PCA-6185 User’s Manual 54 Chapter 5 LAN Configuration 5.1 Introduction The PCA-6185 features single or dual 64-b it gigabit Ethernet networking interace.
55 Chapter 5 5.4 Windows NT Drivers (Broadcom 5703/4) Procedure Note : The CD-ROM driv e is designated as "D" throughout 1. In the "W indows NT" screen, click on "Start" and select "Set- tings". Then click on the "Contro l Panel" icon to select "Net-work".
PCA-6185 User’s Manual 56 3. In the "Select Network Adapter" window , click on "Have Disk...". 4. When the "Insert Disk" window appears, i nsert the utility CD into the CD-ROM drive. The correct file path is D:Drv_LanBROD5703(4)WindowsNTDriver .
57 Chapter 5 6. In the "Microsoft TCP/IP Properties" window , select the "IP Address" tab. Then sele ct "Specify an IP address". T ype in the IP Address and Subnet Mask details. Then click on "OK". 7. In the "Network Settings Change" wind ow , click on "Y es" to restart the computer .
PCA-6185 User’s Manual 58 5.5 Windows 2000 Drivers (Broadcom 5703/4) Proce- dure Note: The CD-R OM drive is designed as "D" thro ughout this sec- tion. 1. In the "W indows 2000" screen, click on " Start" and select " set- tings".
59 Chapter 5 3. In "Device Manager" screen, follow the screen instructions, to click on "Properties". 4. In the following screen, to click on "Update Driver".
PCA-6185 User’s Manual 60 5. Click on "Next". 6. Following the highlighted item , and click on "Next". 7. Select "Network adapte r" and then click Next.
61 Chapter 5 8. Click on "Have Disk". 9. Key in "D:Drv_ )LanBROD5703(4)W indo ws2000Driver", then click on "OK". 10. T o highlight the follow ing item, and click "Next".
PCA-6185 User’s Manual 62 1 1. Click "Next". 12. Press Y es to continue the installation 13. Click “Finish” to complete the installation.
CHAPTER 6 Onboard Security Setup This chapter explains OBS concepts and provides inst ructions for installin g the relevant software drivers. This is done using the driver CD included in your PCA-6185 package.
PCA-6185 User’s Manual 64 Chapter 6 Onboard Security Setup 6.1 Introduction Onboard security (OBS) fun ctions monitor key hardware. They help yo u maintain your system’ s st ability and durability . The PCA-6185 can m onitor 5 sets of sy stem posit ive voltages, 2 sets of system negative voltages, CPU cooling fan speed, and CPU temperature.
65 Chapter 6 6.3 Windows XP/2000 Windows XP/2000 Drivers Set up Proced ure 1. Insert the driver CD into your system’ s CD-ROM drive. In a few seconds, the software installation main menu appears, as shown in the following figure. Click on the “IN ST ALL” button under the “OBS DRIVERS” heading.
PCA-6185 User’s Manual 66 2. Click on OK to install OBS driver 3. After the setup is completed. Y o u can view OBS setting by running this utility . 4.
CHAPTER 7 SCSI Setup The PCA-6185 features an onboard SCSI interface. This chapter provides basic SCSI concepts and instructions for installing the soft ware drivers with the SCSI driver disks CD included in your package.
PCA-6185 User’s Manual 68 Chapter 7 SCSI Setup 7.1 Introduction The PCA-6185 is equipped with an Adaptec AIC-7 902 single-chip PCI- to-SCSI host adapter wh ich provides a dual channel Ultra 320 mult.
69 Chapter 7 7.3 SCSI IDs Each device attached to the SCSI bus, as well as the SCSI controller itself, must be assigned a unique SCSI ID n umber from 0 t o 15. A SCSI ID uniquely identifies each SCSI de vice on the SCSI bus and determines priority when two or more devices ar e trying to use the SCSI bus at the same time.
PCA-6185 User’s Manual 70 7.4 T erminating the SCSI bus T o ensure reliable communication on the SCSI bus, the ends of the SCSI bus must be properly terminated. This is accomplished when the device at the end of the each cable, or the end of the cable itself, has a terminator installed (or enabled).
71 Chapter 7 tems. Run SCSISelect if y ou need to change or vie w current settings , or if you w ould like to run the SCSI disk utilities. SCSI Select Options A vailab l e Settings Default Settings SC.
PCA-6185 User’s Manual 72 Remarks: 1. Setting is valid only if Multipl e LUN Support is enabled 2. Settings are valid only if host adapter BI OS is enabled. 7.6 St arting SCSISelect Follow these steps to start SCSISelect: 1. T urn on or restart your system.
73 Chapter 7 7.7 Using SCSISelect Settings T o select an option, use the arrow keys to move the cursor to the option, then press ENTER. In some cases, selecting an option d isplays another meny . Y ou can retu rn to the previous menu at any time by pressing ESC.
PCA-6185 User’s Manual 74 • Initiate W ide Negotiation -(Default: Y es) When set to Y es, the SCSI card attempts 1 6-bit data transfer ( w ide negot iation.) When set to No, the SCSI card uses 8-bit data transfer unless the SCSI device requests wide negotiation.
75 Chapter 7 system bootup. If this setting disabl ed, you can still invoke the SCSISe- lect Utility b y pressing <Ctrl> <A > after the SCSI card BIOS banner appears.
PCA-6185 User’s Manual 76 • Support Removable Disks Un der BIOS as Fixed Disks —(Default: Disabled) Determines which removabl e-media drives are supported by the SCSI card BIOS. Choices are as follows: • Disabled — No removable-media drives are treated as hard disk drives.
77 Chapter 7 7.8 Using SCSI Disk Utilit ies T o access the SCSI disk uti lities, follow these steps: 1. Select the SCSI Disk Utilities option from the menu that appears after starting SCSISelect. SCSI Sel ect scans the SCSI bus (to deter- mine the devices installed) and di splays a list of all SCSI IDs and the devices assigned to each ID.
PCA-6185 User’s Manual 78 7.10 Windows 2000 Driver setup procedure 1. In the window 2000 screen, click on “start” and select “setting.” Then click on the “Control Pa nel” icon to select “System” 2. In the “System properties”, choos e “PCI SCSI Bus Controller .
79 Chapter 7 3. Click on “Update Driver”.
PCA-6185 User’s Manual 80 4. Click on “Next” 5. Recommend to serach for a better driver.
81 Chapter 7 6. If the SCSI driver is supplied in floppy disk, click on “Floppy di sk drives.” Then, click on “Next.” If the SCSI driver is supplied in CD-ROM disk, click on “Specify a location:" then enter "D:Drv_SCSIAdaptec7902 W indowsWin2000"” 7.
PCA-6185 User’s Manual 82 8. Click on “Y es” to restart the system. 7.1 1 Windows NT Driver Setup Procedure 1. In the W indows NT screen, click on “S tart” and select “Setting.” Then click on the “Control Panel” icon to select “SCSI Adapter .
83 Chapter 7 2. In the SCSI Adapter , choose “D rivers.” Cl ick on “Add” to install SCSI driver . 3. Click on “Have Disk.”.
PCA-6185 User’s Manual 84 4. Click on “Browse” to select the drivers . If the SCSI driver is sup- plied in floppy disk, choose the directory A:. 5.
85 Chapter 7 6. The installation of SCSI Driver is completed. Click on “OK.”.
PCA-6185 User’s Manual 86.
Appendix A Programming the W atchdog Timer The PPC-123 is equipped with a watch- dog timer that resets the CPU or gener- ates an interrupt if processing comes to a standstill for any reason. This feature ensures system reliability in industrial standalone or unmanned environm ents.
PCA-6185 User’s Manual 88 Appendix A Programming the W atchdog Ti m e r A.1 Programming the W atchdog Timer T o program the watchd og timer , yo u must write a program which writes I/ O port address 444 (hex). The output data is a time interval value.
89 Appendix A The following example sh ows how you might program the watchd og timer in BASI C: 10 REM W atchdog timer examp le program 20 OUT &H44 4, data REM Start and restart the watchdog 30 GO.
PCA-6185 User’s Manual 90.
Appendix B Pin Assignment s.
PCA-6185 User’s Manual 92 Appendix B Pin Assignment s B.1 IDE Hard Drive Connector (CN1, CN2) T able B.1: IDE hard drive connector (CN1, CN2) Pin Signal Pin Signal 1 IDE RESET* 2 GND 3D A T A 7 4 D .
93 Appendix B B.2 Floppy Drive Connector (CN3) T able B.2: Floppy dr ive connector (CN3) Pin Signal Pin Signal 1 GND 2 FDHDIN* 3G N D 4 N / C 5 N/C 6 FDEDIN* 7 GND 8 INDEX* 9 GND 10 MOTOR 0* 1 1 GND 1.
PCA-6185 User’s Manual 94 B.3 Parallel Port Connector (CN4) T able B.3: Paral lel port co nnector (CN4) Pin Signal Pin Signal 1 ST ROBE* 14 AUTOFD* 2D 0 1 5 E R R 3D 1 1 6 I N I T * 4D 2 1 7 S L C T.
95 Appendix B B.4 USB Connector (CN6) T able B.4: USB1/USB2 connector (CN6) Pin USB1 Signal Pin USB2 Signal 1 +5 V 6 +5 V 2 UV - 7 UV - 3 UV+ 8 UV+ 4 GND 9 GND 5 Chassis GND 10 N/C B.
PCA-6185 User’s Manual 96 B.6 Keyboard and Mouse Conn nector (CN1 1) T able B.6: Keyboard and m ouse connector (CN1 1) Pin Signal 1 KB DA T A 2M S D A T A 3G N D 4V C C 5 KB CLOCK 6M S C L O C K B.
97 Appendix B B.8 CPU Fan Powe r Connector (CN14) T able B.8: CPU fan power conn ector (CN14) Pin Signal 1G N D 2+ 1 2 V 3 Detect B.9 Power LED (CN16) Y ou can use an LED to indicate when the CPU card is on. Pin 1 of CN16 supplies the LED's power , and Pin 3 is the ground.
PCA-6185 User’s Manual 98 B.10 External Speak er Connector (CN17) The CPU card has its own buzzer . Y ou can also connect it to the external speaker on your comput er chassis. T able B.10 : External speaker (CN17 ) Pin Function 1+ 5 V C C 2G N D 3 Internal buzzer 4 S peaker out B.
99 Appendix B B.12 HDD LED Connector (CN19) T able B.12 : HDD LED connector (CN19) Pin Signal 1 Vcc(LED+) 2 LED0 (LED-) B.13 A TX Feature Connector (CN20) T able B.
PCA-6185 User’s Manual 100 B.14 A TX Sof t Power Switch (CN21) T able B.14: A TX sof t power switch (CN21) Pin Signal 1 3VSB 2P W R - B T N B.15 SM Bus Connector (CN29) T able B.
101 Appendix B B.16 System I/O Port s T able B.16: System I/O port s Addr . Range (HEX) Device 020 021 Programmable interrupt co ntroller 040 043 System timer 060 S tandard 101/102 key or Microsoft Na.
PCA-6185 User’s Manual 102 B.18 Interrupt Assignment s T able B.18 : Interrupt assignments Interrupt # Interru pt assignmen ts 0 (ISA) System timer 1 (ISA) S tandard 101 /102 key or Microsoft Natura.
103 Appendix B B.20 PCI Bus Map T able B.20 : PCI bus map Function AD_Select PCI IRQ GNT Onboard LAN2 AD20 (CIOBX2) SIR Q5 (CIOBX2) SGNT0 (CIO BX2) Onboard LAN1 AD20 (CIOBX2) SIR Q6 (CIOBX2) SGNT0 (CI.
PCA-6185 User’s Manual 104.
An important point after buying a device Advantech PCA-6185 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Advantech PCA-6185 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Advantech PCA-6185 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Advantech PCA-6185 you will learn all the available features of the product, as well as information on its operation. The information that you get Advantech PCA-6185 will certainly help you make a decision on the purchase.
If you already are a holder of Advantech PCA-6185, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Advantech PCA-6185.
However, one of the most important roles played by the user manual is to help in solving problems with Advantech PCA-6185. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Advantech PCA-6185 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
